On Mon, Jul 9, 2012 at 1:39 PM, James Abernathy <jfaberna...@gmail.com>wrote:

> my goal of this test was to see if I could use the n450 BSP as a starting
> point for a BSP to support my Acer Aspire One n450 based netbook.  The
> core-image-sato will boot from USB key on the netbook if I use the ZIP
> drive format for the USB key, but the current n450 BSP doesn't include the
> drivers for the networking hardware in the netbook.
>
> I found by testing, using the menuconfig option documented in the
> Developer Manual Appendix B example, that I needed to add 2 parameters to
> the .config:
>
> CONFIG_ATH9K_PCI
> CONFIG_ATL1C
>
> To make this change easier to manage and more permanent, I thought about
> creating a config fragment.  I put the config parameters in a file,
> myconfig, in the linux-yocto directory at the same level as the
> linux-yocto_3.2.bbappend file, where I added:
>
> SRC_URI += "file//myconfig"
>
>
Try to use myconfig.cfg.

@g
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to