On 21/06/12 16:41, Mark Hatle wrote:
On 6/21/12 10:25 AM, Elvis Dowson wrote:
Hi,
I just updated my yocto repos and tried a fresh build.
There are two errors, see below:
My bblayers.conf file looks like this:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "4"
BBFILES ?= ""
BBLAYERS ?= " \
/tool/yocto/poky/meta \
/tool/yocto/poky/meta-yocto \
/tool/yocto/meta-openembedded/meta-oe \
/tool/yocto/meta-xilinx \
"
And when I run the bitake core-image-minimal;bitbake meta-toolchain
I get the following errors:
$ bitbake core-image-minimal;bitbake meta-toolchain;
Pseudo is not present but is required, building this first before the
main build
WARNING: Unable to get checksum for python-numpy SRC_URI entry
config.h: file could not be found | ETA: 00:00:49
WARNING: Unable to get checksum for python-numpy SRC_URI entry
numpyconfig.h: file could not be found
WARNING:
/tool/yocto/meta-openembedded/meta-oe/recipes-connectivity/networkmanager/networkmanager_0.9.2.0.bb:
it is recommended to set SYSTEMD_PACKAGES as <existing-package>-systemd
WARNING:
/tool/yocto/poky/meta/recipes-extended/lighttpd/lighttpd_1.4.30.bb:
it is recommended to set SYSTEMD_PACKAGES as <existing-package>-systemd
Parsing recipes: 100%
|####################################################################################|
Time: 00:00:37
Parsing of 1186 .bb files complete (0 cached, 1186 parsed). 1524
targets, 40 skipped, 0 masked, 0 errors.
WARNING: BBPATH references the current directory, either through an
empty entry, or a '.'.
This is unsafe and means your layer configuration is adding
empty elements to BBPATH.
Please check your layer.conf files and other BBPATH settings to
remove the current working directory references.
The above is a warning, it is a configuration problem with one or more
layer.conf file within a layer. But it's a warning, the build will
continue.
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable
the checker (see sanity.conf).
Following is the list of potential problems / advisories:
PATH contains '.' or '', which will break the build, please
remove this.
The above is an error. Your shell environment's "PATH" is broken.
You have either '' (blank) or '.' within your path.
Run the following in your shell: echo "${PATH}"
If you see something like:
/usr/bin:/bin:~/bin:.
It's the '.' that is the problem. Rewrite your path by removing the
'.' item.. (similarly if it contains '::' or ends with ':' that is the
blank problem)
--Mark
ERROR: Execution of event handler 'check_sanity_eventhandler' failed
ERROR: Command execution failed: Exited with 1
Summary: There were 5 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit
code.
Pseudo is not present but is required, building this first before the
main build
Loading cache: 100%
|######################################################################################|
ETA: 00:00:00
Loaded 1523 entries from dependency cache.
Parsing recipes: 100%
|####################################################################################|
Time: 00:00:07
Parsing of 1186 .bb files complete (1184 cached, 2 parsed). 1524
targets, 40 skipped, 0 masked, 0 errors.
WARNING: BBPATH references the current directory, either through an
empty entry, or a '.'.
This is unsafe and means your layer configuration is adding
empty elements to BBPATH.
Please check your layer.conf files and other BBPATH settings to
remove the current working directory references.
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable
the checker (see sanity.conf).
Following is the list of potential problems / advisories:
PATH contains '.' or '', which will break the build, please
remove this.
ERROR: Execution of event handler 'check_sanity_eventhandler' failed
ERROR: Command execution failed: Exited with 1
Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit
code.
Best regards,
Elvis Dowson
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
I also started receiving this error about a week ago, my path is as follows:
[jack@archHP r0005]$ echo "${PATH}"
/home/jack/Projects/poky-denzil.git/scripts:/home/jack/Projects/poky-denzil.git/bitbake/bin/:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl
However (from what I can see) this doesn't feature the issue mentioned?
Regards,
--
Jack Mitchell (j...@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
