Apologies for the massive cross-post, but most users don't read the development lists :) To avoid 'reply all' mistakes the addressed lists are in BCC. In case you are wondering which lists: the beagleboard list, the meta-ti list and the yocto project list.
A minor update to the below: the test server will be down for a short time wednesday to upgrade the RAM. Begin doorgestuurd bericht: > Van: Koen Kooi <k...@dominion.thruhere.net> > Onderwerp: Narcissus update <- IMPORTANT > Datum: 3 mei 2012 11:49:56 GMT+02:00 > Aan: Discussion of the angstrom distribution development > <angstrom-distro-de...@linuxtogo.org> > > Hi, > > With the change to an oe-core based system a lot of things changed and > angstrom itself has gone through some changes as well. One of those changes > is that some packages were renamed or deprecated. > To keep narcissus working the decision was made to remove all machines and > trim the package lists. > > The new machine list matches the autobuilder: qemuarm, qemumips, qemuppc, > qemux86, beagleboard and beagleboard. That matches the machines supported in > OE-core and the ones I get paid to support for my day job. > > The branch: > https://github.com/Angstrom-distribution/narcissus/commits/core-update > Test setup: http://dominion.thruhere.net/koen/narcissus/ > > The process to add machines is fairly simple: > > 1) Find the layer for the machine in > http://www.openembedded.org/wiki/LayerIndex > 2) Check the setup scripts to see if it's already configured > 3) Send patch for setupscripts > 4) Send patch for narcissus > > The process for packages is pretty much the same. The will need review since > not every layer plays nice with others. I'm hoping that this process will be > easy enough for people to follow while preventing non-working combinations to > get added. > > As always, feedback appreciated. > > regards, > > Koen _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
