I did not include the BSP testing information in the cover-letter. The tests on the BSP built with these patches included the following:
-- Ports tested: SATA, USB, VGA, HDMI, LVDS -- Basic networking via Ethernet port -- Shutdown, Reboot -- Switch between multiple applications -- Sato Audio and Video player -- web-web kit -- RTC date and time set -- command such as lspci, ssh, lspci -- glxgears (Check graphics acceleration) -- Mplayer (Check Video acceleration, note mplayer recipe is not included in this BSP) -- Check all CPU cores are active All the above testing was done on the Cedar Trail desktop engineering sample board. A subset of The above testing was done on the CRB and mobile engineering sample board. The behavior was found to be OK (i.e. all tests passed) for all the above tests. In the past test behavior was found to be always consistent across the three boards. Rahul -----Original Message----- From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of rahul.sax...@intel.com Sent: Thursday, March 22, 2012 10:32 AM To: yocto@yoctoproject.org; Zanussi, Tom Subject: [yocto] [PATCH 00/13][meta-intel] Cover letter for updating meta-cedartrail BSP with PVR Graphics driver From: Rahul Saxena <rahul.sax...@intel.com> Cover letter for updating the Cedar Trail BSP (meta-cedartrail) with PVR Graphics driver. This patch set updates meta-cedartrail (edison branch) to include Power VR driver for Graphics and Video hardware acceleration. The patches enable BSP build with PVR driver or VESA driver depending upon MACHINE setting in local.conf. In addition the patches add web-webkit, audio and video samples to sato image. The Cedar Trail platform is based on the Cedarview processor (Intel® Atom™ N2600, N2800 and D2700 processor)and Tiger Point Chipset (Intel® NM10 Express) Signed-off-by: Rahul Saxena <rahul.sax...@.intel.com> -- The following changes since commit 31eaee8e24d570207338ada64f2df36cdbd5353d: meta-intel: update SRCREVs (2012-02-22 11:58:38 -0600) are available in the git repository at: git://git.pokylinux.org/meta-intel-contrib rsaxena-cedartrailpvrrelease22March http://git.pokylinux.org/cgit.cgi/meta-intel-contrib/log/?h=rsaxena-cedartrailpvrrelease22March Rahul Saxena (13): meta-cedartrail: Separate conf files for the Cedar Trail BSP boot cases of with and without pvr driver meta-cedartrail: update BBFILES to include meta-intel/common path meta-cedartrail: update README with instructions for PVR Graphics driver build meta-cedatrail: add recipe for setting audio mixer settings during boot meta-cedartrail: seperate xorg.conf files for pvr and no-pvr cases meta-cedartrail: add Cedar Trail PVR driver meta-cedartrail: update Kernel recipes to add support for pvr driver meta-cedartrail: add Cedar Trail specific libva meta-cedartrail: add recipes to instal audio and video samples meta-cedartrail: update formfactor recipe for pvr and no-pvr case meta-cedartrail: Add web-webkit, audio and video samples to sato image meta-cedartrail: Update SRC_URI in kernel recipe append files to point to linux-yocto_3.0 meta-cedartrail: update SRC_REV_meta for no-pvr case meta-cedartrail/README | 50 +++++++++++- meta-cedartrail/conf/layer.conf | 4 +- meta-cedartrail/conf/machine/cedartrail-nopvr.conf | 41 +++++++++ meta-cedartrail/conf/machine/cedartrail.conf | 15 +++- .../cedartrail-audio/cedartrail-audio.bb | 30 +++++++ .../cedartrail-audio/cedartrail-audio | 42 +++++++++ .../formfactor/cedartrail-nopvr/machconfig | 3 + .../xorg-driver/cdv-graphics-drivers_1.0.bb | 89 ++++++++++++++++++++ .../xserver-xf86-config/cedartrail-nopvr/xorg.conf | 26 ++++++ .../xserver-xf86-config/cedartrail/xorg.conf | 24 ++---- .../linux/linux-yocto-rt_3.0.bbappend | 16 ++++- .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 17 +++- .../ogg-CC-BY-3.0-music-samples_0.1.bb | 20 +++++ .../video-samples/bigbuckbunny-ogg.bb | 20 +++++ meta-cedartrail/recipes-multimedia/libva/libva.inc | 59 +++++++++++++ .../recipes-multimedia/libva/libva_1.0.15.bb | 31 +++++++ .../images/core-image-sato-dev.bbappend | 3 + .../images/core-image-sato-sdk.bbappend | 3 + .../recipes-sato/images/core-image-sato.bbappend | 3 + 19 files changed, 468 insertions(+), 28 deletions(-) create mode 100644 meta-cedartrail/conf/machine/cedartrail-nopvr.conf create mode 100644 meta-cedartrail/recipes-bsp/cedartrail-audio/cedartrail-audio.bb create mode 100644 meta-cedartrail/recipes-bsp/cedartrail-audio/cedartrail-audio/cedartrail-audio create mode 100644 meta-cedartrail/recipes-bsp/formfactor/formfactor/cedartrail-nopvr/machconfig mode change 100755 => 100644 meta-cedartrail/recipes-bsp/formfactor/formfactor/cedartrail/machconfig create mode 100644 meta-cedartrail/recipes-graphics/xorg-driver/cdv-graphics-drivers_1.0.bb create mode 100644 meta-cedartrail/recipes-graphics/xorg-xserver/xserver-xf86-config/cedartrail-nopvr/xorg.conf mode change 100755 => 100644 meta-cedartrail/recipes-graphics/xorg-xserver/xserver-xf86-config/cedartrail/xorg.conf create mode 100644 meta-cedartrail/recipes-mediasamples/music-samples/ogg-CC-BY-3.0-music-samples_0.1.bb create mode 100644 meta-cedartrail/recipes-mediasamples/video-samples/bigbuckbunny-ogg.bb create mode 100644 meta-cedartrail/recipes-multimedia/libva/libva.inc create mode 100644 meta-cedartrail/recipes-multimedia/libva/libva_1.0.15.bb create mode 100644 meta-cedartrail/recipes-sato/images/core-image-sato-dev.bbappend create mode 100644 meta-cedartrail/recipes-sato/images/core-image-sato-sdk.bbappend create mode 100644 meta-cedartrail/recipes-sato/images/core-image-sato.bbappend -- 1.7.4.1 _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
