On Wed, Feb 8, 2012 at 3:14 AM, cnxsoft <cnxs...@cnx-software.com> wrote: > Hi, > > I have build x86 qemu image using "bitbake -k core-image-sato" following the > instructions given at > http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html > I'm running Ubuntu 11.10 in VirtualBox 4.1.6. > > When I run qemu, qemu starts apparently fine, but the qemu window stays > black. So I'm suspecting that either it does not work in Virtualbox or I may > have tochange some settings in qemu (e.g. -vga vmware). > > Here's the output: > > runqemu qemux86 > > Continuing with the following parameters: > KERNEL: > [/home/jaufranc/edev/edison-6.0-build/tmp/deploy/images/bzImage-qemux86.bin] > ROOTFS: > [/home/jaufranc/edev/edison-6.0-build/tmp/deploy/images/core-image-minimal-qemux86.ext3] > FSTYPE: [ext3] > Setting up tap interface under sudo > Acquiring lockfile for tap0... > Starting distccd... > Running qemu... > /home/jaufranc/edev/edison-6.0-build/tmp/sysroots/i686-linux/usr/bin/qemu > -kernel > /home/jaufranc/edev/edison-6.0-build/tmp/deploy/images/bzImage-qemux86.bin > -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda > /home/jaufranc/edev/edison-6.0-build/tmp/deploy/images/core-image-minimal-qemux86.ext3 > -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot > -m 128 --append "vga=0 root=/dev/hda rw mem=128M > ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 " > Enabling opengl >
So, what is the problem? _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
