thank you for everybody. On Wed, Feb 1, 2012 at 6:14 PM, Sathishkumar Duraisamy < bewithsath...@gmail.com> wrote:
> On Wed, Feb 1, 2012 at 11:59 AM, Joshua Lock <j...@linux.intel.com> wrote: > > Hi James, > > > > > > On 31/01/12 22:20, James W. wrote: > >> > >> hi all: > >> i am new comer. > >> i meet a error: > >> > >> NOTE: package pciutils-3.1.9-r0: task do_configure: Started > >> ERROR: Function failed: do_configure (see > >> > >> > /home/jwang5/poky-build/tmp/work/i586-poky-linux/pciutils-3.1.9-r0/temp/log.do_configure.9978 > >> for further information) > >> ERROR: Logfile of failure stored in: > >> > >> > /home/jwang5/poky-build/tmp/work/i586-poky-linux/pciutils-3.1.9-r0/temp/log.do_configure.9978 > >> Log data follows: > >> | ERROR: Function failed: do_configure (see > >> > >> > /home/jwang5/poky-build/tmp/work/i586-poky-linux/pciutils-3.1.9-r0/temp/log.do_configure.9978 > >> for further information) > >> | Configuring libpci for your system..../configure: 1: Syntax error: > >> Unterminated quoted string > > > > > > I cam across this error today also, I'd be willing to bet the OS you're > > building on is using the dash shell (Ubuntu)? > > Well, if this error is because of dash, please use the following > comments to change to bash, > > $sudo rm /usr/bin/sh > $sudo ln -s /usr/bin/bash /usr/bin/sh > > There is also, other way to change to dash to bash through package > configure. But any way, above will done through automated scripts. So, > above is good. You can also make sure you are working on bash shell, > by simply, ls -al /usr/bin/sh, which shows whether the link is > pointing to bash or dash. > -- > Regards, > Sathishkumar D > http://flowersopenlab.weebly.com/ > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
