On Tue, 2011-12-13 at 11:13 -0500, autif khan wrote: > I built the "crownbay" (not crownbay-noemgd) image as outlined in the > E660 development kit (link > http://www.yoctoproject.org/download/bsp/intel-atom-processor-e660-intel-platform-controller-hub-eg20t-development-kit-1) > > I used poky-edison-6.0.tar.bz2 and crownbay-edison-6.0.0.tar.bz2 and > followed the instructions (short version - extract, move, add > meta-intel/meta-crownbay to bblayers.conf, add MACHINE="crownbay" to > local.conf, bitbake core-image-sato) > > The result was the expected set of images in tmp/deploy/images > > I loop mounted the core-image-sato-crownbay.ext3 and tried to find > emgd.ko in the file system - I could not find it. (find output > attached - notice that there is no emgd.ko) > > Here is the kicker - crownbay-edison-6.0.0.tar.bz2 has a directory > called "binary" which contains core-image-sato-crownbay.hddimg, which > contains rootfs.img, which I also loop mounted and was able to find > the emgd.ko (however this image does not work with my hardware, I am > not sure why). Find output for this is also included below. > > I very much doubt that it is included as a part of the kernel, I > looked at the kernel's .config (in > tmp/work/crownbay-poky-linux/linux-yocto-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+2247da9131ea7e46ed4766a69bb1353dba22f873-r2/linux-crownbay-standard-build) > and could not find emgd there either. > > So, my questions is if I am doing something wrong? Do I need to do > something to get the emgd.ko to build? I am using the latest release > (6.0 "Edison" (released on October 17th, 2011)). Please advise. > Check out the README file in the meta-crownbay directory. There are instructions on integrating the EMGD driver files into the build.
Jim A > Thanks > > Autif > > autif@xu:~/data/dev/yocto/emgd/tmp/deploy/images/1$ sudo find . | grep emgd > ./usr/lib/libemgdsrv_um.so.1.5.15.3226 > ./usr/lib/libemgdsrv_um.so > ./usr/lib/libemgdglslcompiler.so.1.5.15.3226 > ./usr/lib/libemgdPVR2D_DRIWSEGL.so > ./usr/lib/xorg/modules/drivers/emgd_drv.so > ./usr/lib/libemgdPVR2D_DRIWSEGL.so.1.5.15.3226 > ./usr/lib/libemgdsrv_init.so > ./usr/lib/libemgdsrv_init.so.1.5.15.3226 > ./usr/lib/libemgdglslcompiler.so > ./usr/lib/dri/emgd_dri.so > autif@xu:~/data/dev/yocto/emgd/tmp/deploy/images/1$ > > autif@xu:~/data/dev/yocto/poky-edison-6.0/meta-intel/meta-crownbay/binary/2$ > sudo find . | grep emgd > ./usr/lib/libemgdsrv_um.so > ./usr/lib/dri/emgd_dri.so > ./usr/lib/libemgdsrv_init.so.1.5.15.3226 > ./usr/lib/libemgdsrv_init.so > ./usr/lib/xorg/modules/drivers/emgd_drv.so > ./usr/lib/libemgdPVR2D_DRIWSEGL.so.1.5.15.3226 > ./usr/lib/libemgdglslcompiler.so.1.5.15.3226 > ./usr/lib/libemgdsrv_um.so.1.5.15.3226 > ./usr/lib/libemgdPVR2D_DRIWSEGL.so > ./usr/lib/libemgdglslcompiler.so > ./lib/modules/3.0.4-yocto-standard+/kernel/drivers/gpu/drm/emgd > ./lib/modules/3.0.4-yocto-standard+/kernel/drivers/gpu/drm/emgd/emgd.ko > ./etc/rpm-postinsts/kernel-module-emgd.sh.done > autif@xu:~/data/dev/yocto/poky-edison-6.0/meta-intel/meta-crownbay/binary/2$ > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
