On Fri, Aug 19, 2011 at 6:23 PM, Darren Hart <dvh...@linux.intel.com> wrote: > Fixes [YOCTO #1203] > > Using the hard floating point abi is incompatible with some binary libaries > and > 3D support for the Beagleboard. As we do not provide these in poky and > meta-yocto, we can take advantage of the hard floating point abi. This can be > easily disabled by anyone building on top of meta-yocto if they need the soft > abi by overriding DEFAULT_TUNE. > > Signed-off-by: Darren Hart <dvh...@linux.intel.com> > CC: Jason Kridner <jkrid...@beagleboard.org> > CC: Koen Kooi <k...@dominion.thruhere.net> > --- > meta-yocto/conf/machine/beagleboard.conf | 5 +++++ > 1 files changed, 5 insertions(+), 0 deletions(-) > > diff --git a/meta-yocto/conf/machine/beagleboard.conf > b/meta-yocto/conf/machine/beagleboard.conf > index 0b3cebc..8f11732 100644 > --- a/meta-yocto/conf/machine/beagleboard.conf > +++ b/meta-yocto/conf/machine/beagleboard.conf > @@ -18,6 +18,11 @@ MACHINE_EXTRA_RRECOMMENDS += "beagleboard-audio" > # Allow for MMC booting (required by the NAND-less Beagleboard XM) > EXTRA_IMAGEDEPENDS += "u-boot x-load" > > +# Use the hard floating point abi. This breaks some binary libraries and > +# 3D. Since poky and meta-yocto do not provide these by default, enable the > +# hard floating point abi. Comment out the following or override it to > disable > +# it. > +DEFAULTTUNE ?= "cortexa8hf-neon"
I'm not really fond of what this breaks, but I don't yet have a vision of what I'd be doing with meta-yocto yet and therefore am open to this project giving test coverage to new conditions like this. > include conf/machine/include/tune-cortexa8.inc > > IMAGE_FSTYPES += "tar.bz2 jffs2" > -- > 1.7.6 > > _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
