On 06/16/11 03:27, Koen Kooi wrote:
Op 16 jun 2011, om 08:07 heeft Jingdong Lu het volgende geschreven:
From: Jingdong Lu<jingdong...@windriver.com>
commit e2a346a2a054f702fd76f328ff747b9ad9264a4c from
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
When I do 'git show e2a346a2a054f702fd76f328ff747b9ad9264a4' I get:
commit e2a346a2a054f702fd76f328ff747b9ad9264a4c
Author: Alexander Holler<hol...@ahsoftware.de>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Date: Tue Apr 5 15:40:08 2011 +0200
arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Without msecure beeing high it isn't possible to set (or start)
the RTC.
Tested with a BeagleBoard C4.
Signed-off-by: Alexander Holler<hol...@ahsoftware.de>
Signed-off-by: Tony Lindgren<t...@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
b/arch/arm/mach-omap2/board-omap3beagle.c
index be71426..d64ed97 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -579,6 +579,9 @@ static void __init omap3_beagle_init(void)
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
+ /* Ensure msecure is mux'd to be able to set the RTC. */
+ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
So if you're going to change the author, you'd also need to remove the SOBs.
It's likely just a glitch in patch generation.
Jindong: did you cherry-pick or git am this for the import
into your tree ? Or did you use another technique ?
If done properly, the author is always maintained in our
imported patches.
Cheers,
Bruce
arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC.
"Msecure" signal provides for protection of the RTC register in TPS65950 be
disabling that function via a control signal from the OMAP3530. So ensure
msecure is mux'd to be able to set the RTC.
Tested with a BeagleBoard C4.
Fixes bug [YOCTO #767]
Signed-off-by: Alexander Holler<hol...@ahsoftware.de>
Signed-off-by: Tony Lindgren<t...@atomide.com>
Integrated-by: Jingdong Lu<jingdong...@windriver.com>
---
arch/arm/mach-omap2/board-omap3beagle.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
b/arch/arm/mach-omap2/board-omap3beagle.c
index af1166b..925c0b3 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -580,6 +580,9 @@ static void __init omap3_beagle_init(void)
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
+ /* Ensure msecure is mux'd to be able to set the RTC. */
+ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
--
1.7.0.4
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
