Hello
I'm using Yocto (Scarthgap) on a Raspberry Pi CM4 with ifupdown and
init-ifupdown included in my image. The system uses systemd as the init manager.
It seems that the init scripts for ifupdown are not executed in a systemd
environment. My /etc/network/interfaces file is as follows:
# cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
However, after a reboot, eth0 remains down:
# ip a show eth0
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether d8:3a:dd:a8:b6:52 brd ff:ff:ff:ff:ff:ff
altname end0
Checking systemctl shows:
# systemctl status networking
* networking.service - LSB: Raise network interfaces.
Loaded: loaded (/etc/init.d/networking; generated)
Active: inactive (dead)
Docs: man:systemd-sysv-generator(8)
I have to manually run ifup eth0 to bring up the interface. Is this expected
behavior, or is there a service I need to enable to automate this?
Maybe also any other recommendation for a Network Manager, best with a
high-level API?
Thanks
Benjamin
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#64887): https://lists.yoctoproject.org/g/yocto/message/64887
Mute This Topic: https://lists.yoctoproject.org/mt/111416480/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
