So, I'm at the same point in this excruciating exercise. The output is the same as what I reported before. I'm stuck at the loading of the linux kernel.
I have to set the dtparam arm_64bit=0 for my Yocto image. Could there be an issue with the Raspberry Pi bootcode.bin being unable to load a 32-bit kernel image? If I don't put that parameter in, I get an error from bootcode.bin about there being no loadable kernel image available. Also, I've tried this with u-boot as well. I was thinking it would be easier as u-boot's start requirements are quite straight forward. However I get exactly the same issue. Is this a device tree issue? I have the dtb file: bcm2710-rpi-zero-2.dtb being loaded. Is that the correct one? Can anyone claim that they have a working Yocto image from the more recent repos booting on a Raspberry Pi Zero W 2 board? Cheers!!
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#64730): https://lists.yoctoproject.org/g/yocto/message/64730 Mute This Topic: https://lists.yoctoproject.org/mt/111018045/21656 Mute #raspberrypi:https://lists.yoctoproject.org/g/yocto/mutehashtag/raspberrypi Mute #raspberrypi0-wifi:https://lists.yoctoproject.org/g/yocto/mutehashtag/raspberrypi0-wifi Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
