It's very difficult to help if there's no way to replicate the failing
build and look into the build directory. At least you should show the
failing recipe, so we can check there are no obvious mistakes in it.
Alex
On Fri, 29 Nov 2024 at 07:32, aravind posina via
lists.yoctoproject.org
<posinaaravind0205=gmail....@lists.yoctoproject.org> wrote:
>
> Hello All,
>
> I'm working on yocto to develop a layer .In that customer wants some out
> source wifi related module files . From yocto I'm tring to build the .ko
> files into the rootfs . But whenever i try to compile my recipe i'm getting
> some error. in this can can anyone help out for this one . does i get know
> how to do backporting through yocto.below i'll mention the error cases.
>
>
> ERROR: backports-cypress-5.15.58-r0 do_compile: oe_runmake failed
> ERROR: backports-cypress-5.15.58-r0 do_compile:
> ExecutionError('/home/phytec/sanava-kernel/yocto/build/tmp/work/phyboard_segin_imx6ul_7-phytec-linux-gnueabi/backports-cypress/5.15.58-r0/temp/run.do_compile.2980720',
> 1, None, None)
> ERROR: Logfile of failure stored in:
> /home/phytec/sanava-kernel/yocto/build/tmp/work/phyboard_segin_imx6ul_7-phytec-linux-gnueabi/backports-cypress/5.15.58-r0/temp/log.do_compile.2980720
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 4
> KERNEL_SRC=/home/phytec/sanava-kernel/yocto/build/tmp/work-shared/phyboard-segin-imx6ul-7/kernel-source
>
> KLIB=/home/phytec/sanava-kernel/yocto/build/tmp/work-shared/phyboard-segin-imx6ul-7/kernel-source
>
> KLIB_BUILD=/home/phytec/sanava-kernel/yocto/build/tmp/work-shared/phyboard-segin-imx6ul-7/kernel-build-artifacts
> modules
> | make[4]: 'conf' is up to date.
> | #
> | # configuration written to .config
> | #
> | Building backport-include/backport/autoconf.h ... done.
> | make[3]: *** No rule to make target 'modules'. Stop.
> | make[2]: *** [Makefile.build:13: modules] Error 2
> | make[1]: *** [Makefile.real:88: modules] Error 2
> | make: *** [Makefile:43: modules] Error 2
> | ERROR: oe_runmake failed
> | WARNING: exit code 1 from a shell command.
> | ERROR:
> ExecutionError('/home/phytec/sanava-kernel/yocto/build/tmp/work/phyboard_segin_imx6ul_7-phytec-linux-gnueabi/backports-cypress/5.15.58-r0/temp/run.do_compile.2980720',
> 1, None, None)
> ERROR: Task
> (/home/phytec/sanava-kernel/yocto/sources/meta-sanava/meta-bsp/recipes-kernel/backports/backports-cypress_5.15.58.bb:do_compile)
> failed with exit code '1'
> NOTE: Tasks Summary: Attempted 670 tasks of which 652 didn't need to be rerun
> and 1 failed.
> NOTE: Writing buildhistory
> NOTE: Writing buildhistory took: 2 seconds
>
> Summary: 1 task failed:
>
> /home/phytec/sanava-kernel/yocto/sources/meta-sanava/meta-bsp/recipes-kernel/backports/backports-cypress_5.15.58.bb:do_compile
> Summary: There was 1 WARNING message shown.
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>
> Thank & regards
> Aravind P
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#64379): https://lists.yoctoproject.org/g/yocto/message/64379
Mute This Topic: https://lists.yoctoproject.org/mt/109831107/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
