Hi,
is udev ready when you access the device? In this case check if you have
suitable options available below /dev/disk/by-* .
In general I use GPT partition names to distinguish partitions and their
devices. Those partitions will show up below /dev/disk/by-partlabel
Best regards,
Felix
On 6/11/24 09:09, sancelot wrote:
overlayfs-etc
Hi, I would like to use overlayfs-etc on my usb device that serves as
test and next in the deployed image on hdd image on a /dev/sdx
is there another way to set etc_device as "third partition" instead of
/dev/sda3 or /dev/sdb3 to enable easy porting ?
here it is hardcoded , I understand it is ok on a mobile device with
nand devices , but not on a PC computer
OVERLAYFS_ETC_DEVICE = "/dev/mmcblk0p2"
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#63319): https://lists.yoctoproject.org/g/yocto/message/63319
Mute This Topic: https://lists.yoctoproject.org/mt/106609162/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
