On 3/4/24 01:58, lorenzo.arena via lists.yoctoproject.org wrote:
I'm currently trying to set up a production system for a board based
on the Raspberry Pi CM4. I'd like to be able to build a kernel with
bundled initramfs which allows me to flash the on-board eMMC; such
"flasher" image however should include the artifacts of another image
(which would be the "real" image, so the output wic and bmap files).
Is there a way to do this? I can build this two things separately but
I'd like a single build step which allows me to get the full "flasher"
image
Yes, that is possible. I have done it many times. Create any scripts,
systemd service files etc. you need to automatically install the image
to the eMMC with recipe, create a recipe to install your previously
build system image, create a minimal root file system to contain the
necessary artifacts.
--
Rudolf J Streif
CEO/CTO
1.855.442.3386
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#62671): https://lists.yoctoproject.org/g/yocto/message/62671
Mute This Topic: https://lists.yoctoproject.org/mt/104719133/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
