Hi Marek, and thank you for your reply. Adding line "inherit autotools" (not "autoconf") in my recipe solved that problem. (I also had to put the sources of etherlab as a tgz and not as a plain directory)
I am now facing a different problem: the configure command complains error: kernel 6.5 not available for 8139too driver! As I don't need 8139too, I changed the configure arguments to sh configure --sysconfdir=/etc --enable-igb --disable-8139too This works if I build etherlab out of poky, but has no effect inside do_compile: I still get the same "not available" error. My impression is that my do_compile isn't executed at all, and somehow "configure" is executed without my parameters. Is this possible? Best regards, -- Daniele Lugli General Logic srl Viale Curreno, 41 10133 Torino Italy tel +39 329 3933041 www.general-logic.com ( http://www.general-logic.com/ ) www.linkedin.com/in/daniele- lugli ( http://www.linkedin.com/in/daniele-lugli )
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#62189): https://lists.yoctoproject.org/g/yocto/message/62189 Mute This Topic: https://lists.yoctoproject.org/mt/103796912/21656 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
