The rock-pi-e currently comes in 4 board revisions, the latest of which (v1.21) replaces the realtek 8211e PHY with the 8211f.
This patch enables networking on the rock-pi-e, which had not been working up to this point. Interestingly enough, this patch also has the side-effect of enabling both the 8211e and 8211f PHYs under Linux. Previously only the 8211e boards were working. Signed-off-by: Trevor Woerner <twoer...@gmail.com> --- changes in v2: - add eth_phy_reset_pin to pinctrl-0 in gmac2io node - u-boot patch commit message tweaks --- ...s-rk3328-rock-pi-e-enable-networking.patch | 68 +++++++++++++++++++ recipes-bsp/u-boot/u-boot%.bbappend | 5 ++ 2 files changed, 73 insertions(+) create mode 100644 recipes-bsp/u-boot/files/0001-arm-dts-rk3328-rock-pi-e-enable-networking.patch diff --git a/recipes-bsp/u-boot/files/0001-arm-dts-rk3328-rock-pi-e-enable-networking.patch b/recipes-bsp/u-boot/files/0001-arm-dts-rk3328-rock-pi-e-enable-networking.patch new file mode 100644 index 000000000000..e1c71a40261b --- /dev/null +++ b/recipes-bsp/u-boot/files/0001-arm-dts-rk3328-rock-pi-e-enable-networking.patch @@ -0,0 +1,68 @@ +From 9204939a75805769c654b1dab399c30f2b9bd9b4 Mon Sep 17 00:00:00 2001 +From: Trevor Woerner <twoer...@gmail.com> +Date: Tue, 16 Jan 2024 11:33:50 -0500 +Subject: [PATCH] arm: dts: rk3328-rock-pi-e: enable networking + +Currently the rock-pi-e comes in 4 board spins, the latest of which +replaces the realtek phy from the rtl8211e to the rtl8211f, therefore +rename the phy handle to be more generic. + +The device tree includes information for the MDIO, therefore enable DM_MDIO +to use it. The gmac2io node needs addition information in order for the +driver to initialize correctly, specifically the 3 "snps" lines; add the +reset pin to the pinctrl-0 entry to match. + +Upstream-Status: Submitted +Signed-off-by: Trevor Woerner <twoer...@gmail.com> +--- + arch/arm/dts/rk3328-rock-pi-e.dts | 9 ++++++--- + configs/rock-pi-e-rk3328_defconfig | 2 ++ + 2 files changed, 8 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts +index 018a3a5075c7..f5e28cbf4ffe 100644 +--- a/arch/arm/dts/rk3328-rock-pi-e.dts ++++ b/arch/arm/dts/rk3328-rock-pi-e.dts +@@ -146,12 +146,15 @@ + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; +- phy-handle = <&rtl8211e>; ++ phy-handle = <&rtl8211>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; +- pinctrl-0 = <&rgmiim1_pins>; ++ pinctrl-0 = <&rgmiim1_pins>, <ð_phy_reset_pin>; + snps,aal; ++ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; ++ snps,reset-active-low; ++ snps,reset-delays-us = <0 10000 50000>; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; + tx_delay = <0x26>; +@@ -163,7 +166,7 @@ + #address-cells = <1>; + #size-cells = <0>; + +- rtl8211e: ethernet-phy@1 { ++ rtl8211: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; + pinctrl-names = "default"; +diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig +index c0375beffec3..65ca028c0787 100644 +--- a/configs/rock-pi-e-rk3328_defconfig ++++ b/configs/rock-pi-e-rk3328_defconfig +@@ -76,6 +76,8 @@ CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MISC=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_PHY_REALTEK=y ++CONFIG_DM_MDIO=y + CONFIG_ETH_DESIGNWARE=y + CONFIG_GMAC_ROCKCHIP=y + CONFIG_PHY_ROCKCHIP_INNO_USB2=y +-- +2.43.0.76.g1a87c842ece3 + diff --git a/recipes-bsp/u-boot/u-boot%.bbappend b/recipes-bsp/u-boot/u-boot%.bbappend index d902c9a05a83..62133f24c64a 100644 --- a/recipes-bsp/u-boot/u-boot%.bbappend +++ b/recipes-bsp/u-boot/u-boot%.bbappend @@ -1,3 +1,8 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" +SRC_URI:append:rock-pi-e = " \ + file://0001-arm-dts-rk3328-rock-pi-e-enable-networking.patch \ + " + # various machines require the pyelftools library for parsing dtb files DEPENDS:append = " python3-pyelftools-native" DEPENDS:append:rock-pi-s = " u-boot-tools-native" -- 2.43.0.76.g1a87c842ece3
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#62171): https://lists.yoctoproject.org/g/yocto/message/62171 Mute This Topic: https://lists.yoctoproject.org/mt/103766383/21656 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-