Please follow below steps to check the image. In build directory : to check the sdimage for installing on SD card.
$: ls tmp/deploy/images/raspberrypi3/core-image-base-raspberrypi3.rpi-sdimg Check the image by running above command and then follow the steps i mentioned previously. Regards, Siddhartha V On Fri, 29 May, 2020, 1:17 PM Pankaj Vinadrao Joshi, < [email protected]> wrote: > Hi, > i dont have image with .rpi-sdimg i have image with > > core-image-minimal-raspberrypi4.wic.bz2 > core-image-minimal-raspberrypi4.wic.bmap > core-image-minimal-raspberrypi4.testdata.json > core-image-minimal-raspberrypi4.tar.bz2 > core-image-minimal-raspberrypi4.manifest > core-image-minimal-raspberrypi4.ext3 > > dont have core-image-base-raspberrypi3.rpi-sdimg > > ------------------------------ > *From:* siddhartha v <[email protected]> > *Sent:* Friday, May 29, 2020 1:07 PM > *To:* Pankaj Vinadrao Joshi <[email protected]> > *Cc:* [email protected] <[email protected]> > *Subject:* Re: [yocto] Yocto,core-image-minimal for RPI4 #linux #yocto > > Hello Pankaj, > > Try below mentioned steps, Hope it helps you, (there my image > was"core-image-base-raspberrypi3.rpi-sdimg" replace it by your image ) > > > plug sd card to pc then > > $: lsblk > $: sudo umount /dev/sdb* > > $: sudo dd > if=tmp/deploy/images/raspberrypi3/core-image-base-raspberrypi3.rpi-sdimg > of=/dev/sdb bs=4M > > >> This task will take some time and at the end we will get the output > something similar(not exact it depends on build files) to below : > > 46+0 records in > 46+0 records out > 192937984 bytes (193 MB, 184 MiB) copied, 10.2155 s, 18.9 MB/s > > > $: sync > $: sudo umount /dev/sdb* > > > Best Regards, > Siddhartha V > > On Fri, May 29, 2020 at 12:48 PM Pankaj Vinadrao Joshi < > [email protected]> wrote: > > Hi, > I have built the image for raspberrypi4 and i have got the following > images > > > core-image-minimal.env > > rpi-ft5406-1-4.19.120+git0+9da67d7329-r0-raspberrypi4-20200521111428.dtbo > core-image-minimal-raspberrypi4-20200518130120.rootfs.ext3 > rpi-ft5406.dtbo > core-image-minimal-raspberrypi4-20200518130120.rootfs.manifest > rpi-ft5406-raspberrypi4.dtbo > > core-image-minimal-raspberrypi4-20200518130120.rootfs.tar.bz2 > rpi-hwup-image.env > > core-image-minimal-raspberrypi4-20200518130120.rootfs.wic.bmap > rpi-hwup-image- > > raspberrypi4-20200521111428.rootfs.ext3 > > core-image-minimal-raspberrypi4-20200518130120.rootfs.wic.bz2 > rpi-hwup-image- > > raspberrypi4-20200521111428.rootfs.manifest > > core-image-minimal-raspberrypi4-20200518130120.testdata.json > rpi-hwup-image- > > raspberrypi4-20200521111428.rootfs.tar.bz2 > > core-image-minimal-raspberrypi4.ext3 > rpi-hwup-image-raspberrypi4- > > 20200521111428.rootfs.wic.bmap > > core-image-minimal-raspberrypi4.manifest > rpi-hwup-image-raspberrypi4- > > 20200521111428.rootfs.wic.bz2 > > core-image-minimal-raspberrypi4.tar.bz2 > core-image-minimal-raspberrypi4.testdata.json > > core-image-minimal-raspberrypi4.wic.bmap > > > core-image-minimal-raspberrypi4.wic.bz2 > > and i am trying to copy core-image-minimal-raspberrypi4.wic.bz2* by > using* > > *$sudo dd if=core-image-minimal-raspberrypi4.wic.bz2 of=/dev/sdb * > > but my image is not getting copied into sd card(used two sd cards ,tried > formatting with FAT,Linux),i am missing anything ,do i need to copy > anything else with this core-image-minimal. > which extension of image i should use to bringup my RPI4?? > > Thanks! > > > > > -- > Thanks and Regards. > Siddhartha V. > > [EXT] >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#49529): https://lists.yoctoproject.org/g/yocto/message/49529 Mute This Topic: https://lists.yoctoproject.org/mt/74539072/21656 Mute #yocto: https://lists.yoctoproject.org/mk?hashtag=yocto&subid=6691583 Mute #linux: https://lists.yoctoproject.org/mk?hashtag=linux&subid=6691583 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
