This is the intended behavior
http://specs.openstack.org/openstack/neutron-specs/specs/kilo/multiple-
ipv6-prefixes.html
** Changed in: neutron
Status: In Progress => Opinion
--
You received this bug notification because you are a member of Yahoo!
Engineering Team, which is subscribed to neutron.
https://bugs.launchpad.net/bugs/1578281
Title:
IPv6 IP allocated on port-create for IPv4 subnet
Status in neutron:
Opinion
Bug description:
* High level description: When you have a network that has both IPv4
subnet and a IPv6 stateless subnet, a neutron port-create in which
only a IPv4 subnet is requested (via fixed_ip) results in both IPv4
and IPv6 addresses being allocated for the port. An IPv6 address
should not be allocated in this case.
* Pre-conditions: None. CLI commands executed as tenant user.
* Step-by-step reproduction steps: CLI commands shown below
* Expected output: When creating neutron port with fixed_ip of IPv4
subnet, expected the resulting port to contain only an IPv4 address.
* Actual output: IPv6 and IPv4 addresses were allocated on the port-
create
* Version: master / DevStack
* Steps to re-create:
Create a neutron network with 2 subnets (v4 and v6-slaac)
$ neutron net-create network
$ neutron subnet-create --name subnet_v4 --ip-version 4 network
172.16.1.0/24
$ neutron subnet-create --name subnet_v6 --ip-version 6 --ipv6-ra-mode slaac
--ipv6-address-mode slaac network 2001:db8::/64
$ neutron net-list
+--------------------------------------+---------+-----------------------------------------------------+
| id | name | subnets
|
+--------------------------------------+---------+-----------------------------------------------------+
| e0c605e7-f117-4319-8eab-6429c8d53b4b | network |
bba5da3a-500c-466b-9d1d-f917d5c24d64 172.16.1.0/24 |
| | |
49d0ce59-6888-4e0c-8aff-7def31087524 2001:db8::/64 |
|+--------------------------------------+---------+-----------------------------------------------------+
When creating a neutron port, an IP address is allocated out of both subnets
(as expected).
$ neutron port-create network
Created a new port:
+-----------------------+------------------------------------------------------------------------------------------------------+
| Field | Value
|
+-----------------------+------------------------------------------------------------------------------------------------------+
| admin_state_up | True
|
| allowed_address_pairs |
|
| binding:vnic_type | normal
|
| created_at | 2016-05-04T15:33:08
|
| description |
|
| device_id |
|
| device_owner |
|
| dns_name |
|
| extra_dhcp_opts |
|
| fixed_ips | {"subnet_id":
"bba5da3a-500c-466b-9d1d-f917d5c24d64", "ip_address": "172.16.1.3"}
|
| | {"subnet_id":
"49d0ce59-6888-4e0c-8aff-7def31087524", "ip_address":
"2001:db8::f816:3eff:feb6:75cc"} |
| id | 0e631b7c-0a1d-4d90-a2d6-23f006d7a345
|
| mac_address | fa:16:3e:b6:75:cc
|
| name |
|
| network_id | e0c605e7-f117-4319-8eab-6429c8d53b4b
|
| port_security_enabled | True
|
| security_groups | b886de86-0fdf-4dff-8f07-e67fb7a9a1aa
|
| status | DOWN
|
| tenant_id | ec507c583aa64f1ca186bc5d7944895e
|
| updated_at | 2016-05-04T15:33:08
|
+-----------------------+------------------------------------------------------------------------------------------------------+
When creating a neutron port and requesting just an IPv6 address, the port is
allocated with just an IPv6 address (as expected).
$ neutron port-create --fixed-ip
subnet_id=49d0ce59-6888-4e0c-8aff-7def31087524 network
Created a new port:
+-----------------------+------------------------------------------------------------------------------------------------------+
| Field | Value
|
+-----------------------+------------------------------------------------------------------------------------------------------+
| admin_state_up | True
|
| allowed_address_pairs |
|
| binding:vnic_type | normal
|
| created_at | 2016-05-04T15:34:22
|
| description |
|
| device_id |
|
| device_owner |
|
| dns_name |
|
| extra_dhcp_opts |
|
| fixed_ips | {"subnet_id":
"49d0ce59-6888-4e0c-8aff-7def31087524", "ip_address":
"2001:db8::f816:3eff:fe90:e030"} |
| id | 1a3984a0-d0d5-4fc5-af60-e852c81c3ce7
|
| mac_address | fa:16:3e:90:e0:30
|
| name |
|
| network_id | e0c605e7-f117-4319-8eab-6429c8d53b4b
|
| port_security_enabled | True
|
| security_groups | b886de86-0fdf-4dff-8f07-e67fb7a9a1aa
|
| status | DOWN
|
| tenant_id | ec507c583aa64f1ca186bc5d7944895e
|
| updated_at | 2016-05-04T15:34:22
|
+-----------------------+------------------------------------------------------------------------------------------------------+
When creating a neutron port and requesting just an IPv4 address, the port is
allocated with an IP address from both subnets.
$ neutron port-create --fixed-ip
subnet_id=bba5da3a-500c-466b-9d1d-f917d5c24d64 network
Created a new port:
+-----------------------+------------------------------------------------------------------------------------------------------+
| Field | Value
|
+-----------------------+------------------------------------------------------------------------------------------------------+
| admin_state_up | True
|
| allowed_address_pairs |
|
| binding:vnic_type | normal
|
| created_at | 2016-05-04T15:40:29
|
| description |
|
| device_id |
|
| device_owner |
|
| dns_name |
|
| extra_dhcp_opts |
|
| fixed_ips | {"subnet_id":
"bba5da3a-500c-466b-9d1d-f917d5c24d64", "ip_address": "172.16.1.4"}
|
| | {"subnet_id":
"49d0ce59-6888-4e0c-8aff-7def31087524", "ip_address":
"2001:db8::f816:3eff:fe56:fc6e"} |
| id | fb3e6820-0448-47c0-b028-4659a6f6c833
|
| mac_address | fa:16:3e:56:fc:6e
|
| name |
|
| network_id | e0c605e7-f117-4319-8eab-6429c8d53b4b
|
| port_security_enabled | True
|
| security_groups | b886de86-0fdf-4dff-8f07-e67fb7a9a1aa
|
| status | DOWN
|
| tenant_id | ec507c583aa64f1ca186bc5d7944895e
|
| updated_at | 2016-05-04T15:40:29
|
+-----------------------+------------------------------------------------------------------------------------------------------+
If the user requested only the IPv4 subnet, an IPv6 address should not
be allocated.
To manage notifications about this bug go to:
https://bugs.launchpad.net/neutron/+bug/1578281/+subscriptions
--
Mailing list: https://launchpad.net/~yahoo-eng-team
Post to : yahoo-eng-team@lists.launchpad.net
Unsubscribe : https://launchpad.net/~yahoo-eng-team
More help : https://help.launchpad.net/ListHelp
