On Sat, Aug 08, 2020 at 12:47:01AM +0300, Влад Макаров wrote: > Hi, I have a graphical tablet (Huion hs611) that has a touch strip on it. > It doesn't work out-of-the-box as well as tablet's buttons but I managed to > get buttons to work with xorg config file. > Section "InputClass" > Identifier "Tabletkeyb" > Driver "kbd"
the keyboard driver is no longer supported on linux (the code was removed roughly a year ago) and it hasn't really been used on linux for over a decade. This snippet is almost certainly wrong and if it does work, it's probably only because because something else overrides the Driver line. > MatchDevicePath "/dev/input/event*" > MatchUSBID "256c:006d" > MatchProduct "HUION Huion Tablet_HS611 Keyboard" > EndSection > > I tried to do the same thing with touch strip (MatchProduct "HUION Huion > Tablet_HS611 Touch Strip") however I don't know which driver to choose. > When I run *evtest *and touch it the output is something like this: > Event: time 1596835859.438708, type 3 (EV_ABS), code 40 (ABS_MISC), value 15 > Event: time 1596835859.438708, -------------- SYN_REPORT ------------ > Event: time 1596835859.626698, type 3 (EV_ABS), code 8 (ABS_WHEEL), value > 1 # *(this value changes from 1 to 7)* > Event: time 1596835859.626698, -------------- SYN_REPORT ------------ > So ABS_WHEEL must be a keycode or something. This thing is giving some > output so I hope there is a way to make it work. I would be very grateful > if you could help me) in general, libinput supports tablet pads including strips and rings. ABS_WHEEL is usually a touch ring like Wacom has on their Intuos Pro line. HUION devices are ... special though, and not just because they re-use the same usb id for multiple different devices. I suggest you get in contact with the DIGImend project which specialises in making these devices work. Cheers, Peter _______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: https://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s
