Hello Felix and Xorg team Felix Miata schrieb am 10. August 2019 um 23:00
> > As I annonced, I made an > > attempt with disabled DRI option for the video card, i.e. I introduced > > > Option "DRI" "False" > I suppose DRI support is supposed to be auto-detected but maybe is > not working as expected in your environments. > https://en.wikipedia.org/wiki/Direct_Rendering_Infrastructure > > in the device section of xorg.conf. The result was that the X server > > started as expected. Below the respective logfile. > > > Thus, the problem is solved though I do not know or try to imagine > > what benefits DRI "Direct rendering infrastructure" might have. > Does this PC with AGP slot and G400 have 4G or more physical RAM? If > it does not, as I have no AGP slot boards that support more than 2G > and suspect maybe there exists no such things, for completeness sake > I would undo the DRI false option and try the non-PAE kernel. See > here why I make this suggestion: > https://bugzilla.opensuse.org/show_bug.cgi?id=1118689#c29 Anyway, > great to know these great old GPUs remain useful for others than > myself. :-) The working memory of this PC is 512 Megabyte. I booted it with the non-PAE kernel and commented out the DRI option. The X server failed again to start. (Logfile attached) > ------------------------------------------------------------------------------ > Markus Hiereth composed on 2019-08-10 22:27 (UTC+0200): > > > [ 3974.700] (II) MGA(0): VESA VBE DDC supported > > [ 3974.700] (II) MGA(0): VESA VBE DDC Level none > > [ 3974.700] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec. > > [ 3974.844] (II) MGA(0): VESA VBE DDC read failed > I spotted another unexpected difference. Mine: > [ 1679.533] (II) MGA(0): VESA VBE DDC supported > [ 1679.533] (II) MGA(0): VESA VBE DDC Level 2 > [ 1679.533] (II) MGA(0): VESA VBE DDC transfer in appr. 1 sec. > [ 1681.106] (II) MGA(0): VESA VBE DDC read successfully > This suggests to me your problem's root could be in your display's > EDID. Have you tried with other displays? I suppose my monitor does not deliver EDID information. It is remarkably older than yours (2000 versus 2011). From a working configuration of the system with Debian 8 (it is a dual boot system) I copied a modeline with adequate settings for this monitor. Thanks for your additional hints Markus
[ 2111.172] X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 [ 2111.172] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian [ 2111.172] Current Operating System: Linux lune 4.19.0-5-686 #1 SMP Debian 4.19.37-5 (2019-06-19) i686 [ 2111.172] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686 root=/dev/sda7 [ 2111.172] Build Date: 05 March 2019 08:11:12PM [ 2111.172] xorg-server 2:1.20.4-1 (https://www.debian.org/support) [ 2111.173] Current version of pixman: 0.36.0 [ 2111.173] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 2111.173] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 2111.173] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 11 19:42:57 2019 [ 2111.174] (==) Using config file: "/etc/X11/xorg.conf" [ 2111.174] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 2111.175] (==) ServerLayout "X.org Configured" [ 2111.175] (**) |-->Screen "Screen0" (0) [ 2111.175] (**) | |-->Monitor "Monitor0" [ 2111.177] (**) | |-->Device "Card0" [ 2111.177] (**) |-->Input Device "Mouse0" [ 2111.177] (**) |-->Input Device "Keyboard0" [ 2111.177] (==) Automatically adding devices [ 2111.177] (==) Automatically enabling devices [ 2111.177] (==) Automatically adding GPU devices [ 2111.178] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 2111.178] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 2111.178] Entry deleted from font path. [ 2111.178] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 2111.178] (**) ModulePath set to "/usr/lib/xorg/modules" [ 2111.178] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 2111.178] (WW) Disabling Mouse0 [ 2111.178] (WW) Disabling Keyboard0 [ 2111.178] (II) Loader magic: 0x75c740 [ 2111.178] (II) Module ABI versions: [ 2111.178] X.Org ANSI C Emulation: 0.4 [ 2111.178] X.Org Video Driver: 24.0 [ 2111.178] X.Org XInput driver : 24.1 [ 2111.178] X.Org Server Extension : 10.0 [ 2111.184] (++) using VT number 7 [ 2111.184] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 2111.187] (II) xfree86: Adding drm device (/dev/dri/card0) [ 2111.198] (--) PCI:*(1@0:0:0) 102b:0525:102b:19d8 rev 4, Mem @ 0xdc000000/33554432, 0xdfefc000/16384, 0xdf000000/8388608, BIOS @ 0x????????/131072 [ 2111.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 2111.198] (II) LoadModule: "glx" [ 2111.200] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 2111.207] (II) Module glx: vendor="X.Org Foundation" [ 2111.207] compiled for 1.20.4, module version = 1.0.0 [ 2111.207] ABI class: X.Org Server Extension, version 10.0 [ 2111.207] (II) LoadModule: "mga" [ 2111.207] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so [ 2111.208] (II) Module mga: vendor="X.Org Foundation" [ 2111.208] compiled for 1.20.4, module version = 2.0.0 [ 2111.208] Module class: X.Org Video Driver [ 2111.208] ABI class: X.Org Video Driver, version 24.0 [ 2111.208] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200 eW3 Nuvoton, mgag200eH, mgag200eH3, mgag400, mgag550 [ 2111.209] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 2111.209] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 2111.219] (II) Loading sub module "vgahw" [ 2111.219] (II) LoadModule: "vgahw" [ 2111.219] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 2111.220] (II) Module vgahw: vendor="X.Org Foundation" [ 2111.220] compiled for 1.20.4, module version = 0.1.0 [ 2111.220] ABI class: X.Org Video Driver, version 24.0 [ 2111.220] (--) MGA(0): Chipset: "mgag400" (G400) [ 2111.221] xf86TokenToOptinfo: table is NULL [ 2111.221] xf86TokenToOptinfo: table is NULL [ 2111.221] (==) MGA(0): Using HW cursor [ 2111.221] (--) MGA(0): Linear framebuffer at 0xDC000000 [ 2111.221] (--) MGA(0): MMIO registers at 0xDFEFC000 [ 2111.221] (--) MGA(0): Pseudo-DMA transfer window at 0xDF000000 [ 2111.226] (II) MGA(0): MAPPED Framebuffer DC000000 2000000 to B5266000. [ 2111.226] (II) MGA(0): UNMAPPING framebuffer 0xB5266000, 0x2000000. [ 2111.228] (==) MGA(0): Depth 24, (--) framebuffer bpp 32 [ 2111.228] (==) MGA(0): RGB weight 888 [ 2111.228] (==) MGA(0): Using AGP 1x mode [ 2111.228] (==) MGA(0): Using EXA acceleration [ 2111.228] (II) Loading sub module "exa" [ 2111.228] (II) LoadModule: "exa" [ 2111.229] (II) Loading /usr/lib/xorg/modules/libexa.so [ 2111.234] (II) Module exa: vendor="X.Org Foundation" [ 2111.234] compiled for 1.20.4, module version = 2.6.0 [ 2111.234] ABI class: X.Org Video Driver, version 24.0 [ 2111.235] (--) MGA(0): Video BIOS info block at offset 0x07CE0 [ 2111.235] (==) MGA(0): VideoRAM: 16384 kByte [ 2111.235] (II) Loading sub module "ddc" [ 2111.235] (II) LoadModule: "ddc" [ 2111.235] (II) Module "ddc" already built-in [ 2111.235] (II) Loading sub module "i2c" [ 2111.235] (II) LoadModule: "i2c" [ 2111.235] (II) Module "i2c" already built-in [ 2111.236] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B624A000. [ 2111.236] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 2111.337] (II) MGA(0): I2C bus "DDC P1" initialized. [ 2111.338] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. [ 2112.126] (--) MGA(0): No DDC signal [ 2112.126] (II) Loading sub module "vbe" [ 2112.126] (II) LoadModule: "vbe" [ 2112.127] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 2112.127] (II) Module vbe: vendor="X.Org Foundation" [ 2112.127] compiled for 1.20.4, module version = 1.1.0 [ 2112.128] ABI class: X.Org Video Driver, version 24.0 [ 2112.128] (II) Loading sub module "int10" [ 2112.128] (II) LoadModule: "int10" [ 2112.128] (II) Loading /usr/lib/xorg/modules/libint10.so [ 2112.129] (II) Module int10: vendor="X.Org Foundation" [ 2112.129] compiled for 1.20.4, module version = 1.0.0 [ 2112.129] ABI class: X.Org Video Driver, version 24.0 [ 2112.129] (II) MGA(0): initializing int10 [ 2112.131] (II) MGA(0): Primary V_BIOS segment is: 0xc000 [ 2112.132] (II) MGA(0): VESA BIOS detected [ 2112.132] (II) MGA(0): VESA VBE Version 3.0 [ 2112.132] (II) MGA(0): VESA VBE Total Mem: 16384 kB [ 2112.132] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. [ 2112.132] (II) MGA(0): VESA VBE OEM Software Rev: 2.1 [ 2112.132] (II) MGA(0): VESA VBE OEM Vendor: Matrox [ 2112.133] (II) MGA(0): VESA VBE OEM Product: Matrox G400 [ 2112.133] (II) MGA(0): VESA VBE OEM Product Rev: 00 [ 2112.278] (II) MGA(0): VESA VBE DDC supported [ 2112.278] (II) MGA(0): VESA VBE DDC Level none [ 2112.278] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec. [ 2112.423] (II) MGA(0): VESA VBE DDC read failed [ 2112.435] (II) MGA(0): UNMAPPING framebuffer 0xB624A000, 0x1000000. [ 2112.436] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) [ 2112.436] (==) MGA(0): Min pixel clock is 17 MHz [ 2112.436] (--) MGA(0): Max pixel clock is 300 MHz [ 2112.436] (II) MGA(0): Monitor0: Using hsync value of 48.36 kHz [ 2112.436] (II) MGA(0): Monitor0: Using vrefresh value of 60.00 Hz [ 2112.436] (WW) MGA(0): Unable to estimate virtual size [ 2112.436] (II) MGA(0): Clock range: 17.75 to 300.00 MHz [ 2112.436] (II) MGA(0): Not using default mode "640x350" (hsync out of range) [ 2112.436] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) [ 2112.436] (II) MGA(0): Not using default mode "640x400" (hsync out of range) [ 2112.436] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) [ 2112.436] (II) MGA(0): Not using default mode "720x400" (hsync out of range) [ 2112.436] (II) MGA(0): Not using default mode "360x200" (hsync out of range) [ 2112.436] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 2112.436] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 2112.437] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 2112.437] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 2112.437] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "320x240" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) [ 2112.437] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range) [ 2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "1024x768i" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "512x384i" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 2112.437] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1280x960" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1280x960" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "896x672" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "896x672" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "928x696" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "928x696" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "960x720" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "960x720" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "832x624" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "416x312" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1152x864" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1360x768" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "680x384" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1360x768" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "680x384" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1440x900" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "720x450" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1600x1024" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "800x512" (hsync out of range) [ 2112.441] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "960x540" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "960x600" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) [ 2112.442] (II) MGA(0): Not using default mode "960x720" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "2048x1536" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) [ 2112.442] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) [ 2112.442] (II) MGA(0): Not using default mode "640x360" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan) [ 2112.442] (II) MGA(0): Not using default mode "640x360" (hsync out of range) [ 2112.442] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan) [ 2112.443] (II) MGA(0): Not using default mode "720x405" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan) [ 2112.443] (II) MGA(0): Not using default mode "720x405" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan) [ 2112.443] (II) MGA(0): Not using default mode "864x486" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan) [ 2112.443] (II) MGA(0): Not using default mode "864x486" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan) [ 2112.443] (II) MGA(0): Not using default mode "960x540" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "480x270" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "960x540" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "480x270" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1024x576" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "512x288" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1024x576" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "512x288" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1280x720" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "640x360" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1280x720" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "640x360" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1368x768" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "684x384" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1368x768" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "684x384" (hsync out of range) [ 2112.443] (II) MGA(0): Not using default mode "1600x900" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "800x450" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "1600x900" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "800x450" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "960x540" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "960x540" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "1024x576" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "1024x576" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "2560x1440" (unknown reason) [ 2112.444] (II) MGA(0): Not using default mode "1280x720" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan) [ 2112.444] (II) MGA(0): Not using default mode "1280x720" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode) [ 2112.444] (II) MGA(0): Not using default mode "1440x810" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode) [ 2112.444] (II) MGA(0): Not using default mode "1440x810" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode) [ 2112.444] (II) MGA(0): Not using default mode "1600x900" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode) [ 2112.444] (II) MGA(0): Not using default mode "1600x900" (hsync out of range) [ 2112.444] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "1920x1080" (unknown reason) [ 2112.445] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan) [ 2112.445] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan) [ 2112.445] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan) [ 2112.445] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan) [ 2112.445] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan) [ 2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode) [ 2112.445] (II) MGA(0): Not using default mode "1280x800" (hsync out of range) [ 2112.445] (II) MGA(0): Not using default mode "640x400" (hsync out of range) [ 2112.445] (II) MGA(0): Not using default mode "1280x800" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "640x400" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "1400x900" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "700x450" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "1400x900" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "700x450" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "840x525" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "960x600" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "960x600" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "2560x1600" (unknown reason) [ 2112.446] (II) MGA(0): Not using default mode "1280x800" (hsync out of range) [ 2112.446] (II) MGA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan) [ 2112.446] (II) MGA(0): Not using default mode "1280x800" (hsync out of range) [ 2112.447] (II) MGA(0): Virtual size is 1024x768 (pitch 1024) [ 2112.447] (**) MGA(0): *Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz [ 2112.447] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz z) [ 2112.447] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) [ 2112.447] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd) [ 2112.447] (==) MGA(0): DPI set to (96, 96) [ 2112.447] (II) MGA(0): YDstOrg is set to 0 [ 2112.447] (II) Loading sub module "fb" [ 2112.447] (II) LoadModule: "fb" [ 2112.447] (II) Loading /usr/lib/xorg/modules/libfb.so [ 2112.448] (II) Module fb: vendor="X.Org Foundation" [ 2112.448] compiled for 1.20.4, module version = 1.0.0 [ 2112.448] ABI class: X.Org ANSI C Emulation, version 0.4 [ 2112.448] (II) Loading sub module "ramdac" [ 2112.448] (II) LoadModule: "ramdac" [ 2112.449] (II) Module "ramdac" already built-in [ 2112.449] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B622E000. [ 2112.450] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 2112.544] (--) MGA(0): 16 DWORD fifo [ 2112.557] (==) MGA(0): Default visual is TrueColor [ 2112.558] (II) MGA(0): [drm] bpp: 32 depth: 24 [ 2112.558] (II) MGA(0): [drm] Sarea 2200+664: 2864 [ 2112.558] drmOpenDevice: node name is /dev/dri/card0 [ 2112.558] drmOpenDevice: open result is 14, (OK) [ 2112.558] drmOpenDevice: node name is /dev/dri/card0 [ 2112.558] drmOpenDevice: open result is 14, (OK) [ 2112.558] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 2112.558] drmOpenDevice: node name is /dev/dri/card0 [ 2112.558] drmOpenDevice: open result is 14, (OK) [ 2112.559] drmOpenByBusid: drmOpenMinor returns 14 [ 2112.559] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 2112.559] (II) [drm] DRM interface version 1.4 [ 2112.559] (II) [drm] DRM open master succeeded. [ 2112.559] (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables. [ 2112.559] (II) MGA(0): [drm] framebuffer handle = 0xdc000000 [ 2112.559] (II) MGA(0): [drm] added 1 reserved context for kernel [ 2112.559] (II) MGA(0): X context handle = 0x1 [ 2112.559] (EE) MGA(0): [drm] failed to setup DRM signal handler [ 2112.559] (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI. [ 2112.560] (II) MGA(0): X 1024 Y 768 bpp 32 [ 2112.560] (II) MGA(0): Start at 0xb622e000, size ffec00, osb 301000 [ 2112.560] (II) EXA(0): Offscreen pixmap area of 13622272 bytes [ 2112.560] (II) EXA(0): Driver registered support for the following operations: [ 2112.560] (II) Solid [ 2112.560] (II) Copy [ 2112.560] (II) Composite (RENDER acceleration) [ 2112.560] (II) UploadToScreen [ 2112.560] (==) MGA(0): Backing store enabled [ 2112.560] (==) MGA(0): Silken mouse enabled [ 2112.561] (==) MGA(0): DPMS enabled [ 2112.561] (II) MGA(0): Using overlay video [ 2112.561] (WW) MGA(0): Direct rendering disabled [ 2112.561] (II) Initializing extension Generic Event Extension [ 2112.563] (II) Initializing extension SHAPE [ 2112.564] (II) Initializing extension MIT-SHM [ 2112.565] (II) Initializing extension XInputExtension [ 2112.567] (II) Initializing extension XTEST [ 2112.568] (II) Initializing extension BIG-REQUESTS [ 2112.570] (II) Initializing extension SYNC [ 2112.571] (II) Initializing extension XKEYBOARD [ 2112.573] (II) Initializing extension XC-MISC [ 2112.574] (II) Initializing extension SECURITY [ 2112.575] (II) Initializing extension XFIXES [ 2112.576] (II) Initializing extension RENDER [ 2112.578] (II) Initializing extension RANDR [ 2112.580] (II) Initializing extension COMPOSITE [ 2112.582] (II) Initializing extension DAMAGE [ 2112.583] (II) Initializing extension MIT-SCREEN-SAVER [ 2112.584] (II) Initializing extension DOUBLE-BUFFER [ 2112.586] (II) Initializing extension RECORD [ 2112.587] (II) Initializing extension DPMS [ 2112.588] (II) Initializing extension Present [ 2112.589] (II) Initializing extension DRI3 [ 2112.589] (II) Initializing extension X-Resource [ 2112.591] (II) Initializing extension XVideo [ 2112.592] (II) Initializing extension XVideo-MotionCompensation [ 2112.592] (II) Initializing extension SELinux [ 2112.592] (II) SELinux: Disabled on system [ 2112.592] (II) Initializing extension GLX [ 2112.593] (II) AIGLX: Screen 0 is not DRI2 capable [ 2112.791] (II) IGLX: Loaded and initialized swrast [ 2112.791] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 2112.791] (II) Initializing extension XFree86-VidModeExtension [ 2112.793] (II) Initializing extension XFree86-DGA [ 2112.794] (II) Initializing extension XFree86-DRI [ 2112.795] (II) Initializing extension DRI2 [ 2113.141] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 2113.141] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 2113.141] (II) LoadModule: "evdev" [ 2113.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2113.144] (II) Module evdev: vendor="X.Org Foundation" [ 2113.144] compiled for 1.20.1, module version = 2.10.6 [ 2113.144] Module class: X.Org XInput Driver [ 2113.144] ABI class: X.Org XInput driver, version 24.1 [ 2113.145] (II) Using input driver 'evdev' for 'Power Button' [ 2113.145] (**) Power Button: always reports core events [ 2113.145] (**) evdev: Power Button: Device: "/dev/input/event4" [ 2113.145] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 2113.146] (--) evdev: Power Button: Found keys [ 2113.146] (II) evdev: Power Button: Configuring as keyboard [ 2113.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4" [ 2113.146] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 2113.146] (**) Option "xkb_rules" "evdev" [ 2113.146] (**) Option "xkb_model" "pc105" [ 2113.146] (**) Option "xkb_layout" "de" [ 2113.282] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 2113.282] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 2113.282] (II) Using input driver 'evdev' for 'Power Button' [ 2113.282] (**) Power Button: always reports core events [ 2113.282] (**) evdev: Power Button: Device: "/dev/input/event2" [ 2113.283] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 2113.283] (--) evdev: Power Button: Found keys [ 2113.283] (II) evdev: Power Button: Configuring as keyboard [ 2113.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2" [ 2113.283] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 2113.283] (**) Option "xkb_rules" "evdev" [ 2113.283] (**) Option "xkb_model" "pc105" [ 2113.283] (**) Option "xkb_layout" "de" [ 2113.288] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 2113.288] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 2113.288] (II) Using input driver 'evdev' for 'Sleep Button' [ 2113.288] (**) Sleep Button: always reports core events [ 2113.289] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 2113.289] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 2113.289] (--) evdev: Sleep Button: Found keys [ 2113.289] (II) evdev: Sleep Button: Configuring as keyboard [ 2113.289] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3" [ 2113.289] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 2113.289] (**) Option "xkb_rules" "evdev" [ 2113.289] (**) Option "xkb_model" "pc105" [ 2113.290] (**) Option "xkb_layout" "de" [ 2113.296] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 2113.296] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 2113.296] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 2113.296] (**) AT Translated Set 2 keyboard: always reports core events [ 2113.296] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 2113.297] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 2113.297] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 2113.297] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 2113.297] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 2113.297] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 2113.297] (**) Option "xkb_rules" "evdev" [ 2113.297] (**) Option "xkb_model" "pc105" [ 2113.297] (**) Option "xkb_layout" "de" [ 2113.302] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1) [ 2113.303] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 2113.303] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse' [ 2113.303] (**) ImExPS/2 Generic Explorer Mouse: always reports core events [ 2113.303] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1" [ 2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6 [ 2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons [ 2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) [ 2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes [ 2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes [ 2113.303] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse [ 2113.303] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support [ 2113.304] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 2113.304] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 2113.304] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 2113.304] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10) [ 2113.304] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes. [ 2113.305] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 [ 2113.305] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0 [ 2113.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000 [ 2113.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4 [ 2113.309] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0) [ 2113.309] (II) No input driver specified, ignoring this device. [ 2113.309] (II) This device may have been added with another device file. [ 2113.312] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 2113.312] (II) No input driver specified, ignoring this device. [ 2113.312] (II) This device may have been added with another device file. [ 2113.347] (EE) [ 2113.347] (EE) Backtrace: [ 2113.348] (EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x68ecf2] [ 2113.353] (EE) 1: linux-gate.so.1 (?+0x0) [0xb7ee1d57] [ 2113.355] (EE) 2: ? (?+0x0) [0xc0000000] [ 2113.356] (EE) unw_step failed: unspecified (general) error [-1] [ 2113.356] (EE) [ 2113.356] (EE) Segmentation fault at address 0xc0000000 [ 2113.356] (EE) Fatal server error: [ 2113.356] (EE) Caught signal 11 (Segmentation fault). Server aborting [ 2113.356] (EE) [ 2113.356] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 2113.356] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 2113.357] (EE) [ 2113.374] (EE) Server terminated with error (1). Closing log file.
_______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: https://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s
