Greetings; The vendors programmers are attempting to bring the dual Mali gfx engines to life on this credit card sized arm64 board.
I am at the end of the text message phase of the bootup, getting a black screen which I don't believe is vt7. I have a blinking underline cursor, and anything that disturbs the system causes the text log to be printed on this screen. keyboard/mouse are inoperative, so I have to go to another machine and ssh into this one to try and troubleshoot. I seem to have gone as far as I have the mental resources to go. So here is the Xorg.0.log from the last boot attempt. If you can discern what is needed next, I'd be rather thankfull. (wordwrap off) [ 330.899] X.Org X Server 1.19.2 Release Date: 2017-03-02 [ 330.899] X Protocol Version 11, Revision 0 [ 330.899] Build Operating System: Linux 4.9.0-4-arm64 aarch64 Debian [ 330.899] Current Operating System: Linux rock64 4.4.120-rockchip-ayufan-210 #1 SMP Sun Apr 22 12:25:01 UTC 2018 aarch64 [ 330.899] Kernel command line: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=3e:1b:98:17:e3:8c eth1addr=3e:1b:98:17:e3:ac serial=cdad738cabd5366 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 330.899] Build Date: 16 October 2017 08:11:43AM [ 330.899] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) [ 330.899] Current version of pixman: 0.34.0 [ 330.899] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 330.899] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 330.899] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 25 00:04:28 2018 [ 330.900] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 330.900] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 330.900] (==) No Layout section. Using the first Screen section. [ 330.900] (**) |-->Screen "DefaultScreen" (0) [ 330.900] (**) | |-->Monitor "<default monitor>" [ 330.901] (**) | |-->Device "Mali FBDEV" [ 330.901] (**) | |-->GPUDevice "Rockchip Graphics" [ 330.901] (==) No monitor specified for screen "DefaultScreen". Using a default monitor configuration. [ 330.901] (==) Automatically adding devices [ 330.901] (==) Automatically enabling devices [ 330.901] (==) Automatically adding GPU devices [ 330.901] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 330.901] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 330.901] Entry deleted from font path. [ 330.901] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 330.901] (==) ModulePath set to "/usr/lib/xorg/modules" [ 330.901] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 330.901] (II) Loader magic: 0x5586103dc8 [ 330.901] (II) Module ABI versions: [ 330.901] X.Org ANSI C Emulation: 0.4 [ 330.901] X.Org Video Driver: 23.0 [ 330.901] X.Org XInput driver : 24.1 [ 330.902] X.Org Server Extension : 10.0 [ 330.903] (++) using VT number 7 [ 330.904] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 330.905] (II) xfree86: Adding drm device (/dev/dri/card0) [ 330.920] (II) no primary bus or device found [ 330.920] falling back to /sys/devices/platform/display-subsystem/drm/card0 [ 330.920] (II) LoadModule: "glx" [ 330.920] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 330.925] (II) Module glx: vendor="X.Org Foundation" [ 330.925] compiled for 1.19.2, module version = 1.0.0 [ 330.925] ABI class: X.Org Server Extension, version 10.0 [ 330.925] (II) LoadModule: "armsoc" [ 330.925] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so [ 330.925] (II) Module armsoc: vendor="X.Org Foundation" [ 330.925] compiled for 1.19.5, module version = 1.4.1 [ 330.926] Module class: X.Org Video Driver [ 330.926] ABI class: X.Org Video Driver, version 23.0 [ 330.926] (II) LoadModule: "modesetting" [ 330.926] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 330.926] (II) Module modesetting: vendor="X.Org Foundation" [ 330.926] compiled for 1.19.2, module version = 1.19.2 [ 330.926] Module class: X.Org Video Driver [ 330.926] ABI class: X.Org Video Driver, version 23.0 [ 330.926] (II) ARMSOC: Driver for ARM Mali compatible chipsets [ 330.926] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 330.927] (WW) Falling back to old probe method for armsoc [ 330.927] (II) No BusID or DriverName specified - opening /dev/dri/card0 [ 330.927] (II) Got BusID display-subsystem [ 330.953] (II) Opened DRM [ 330.953] (II) DeviceName is [/dev/dri/card0] [ 330.953] (II) bus_id is [display-subsystem] [ 330.953] (II) DriverName is [rockchip] [ 330.953] (II) version is [1.0.0] [ 330.953] (II) Screen:0, CRTC:-1 [ 330.987] (II) modeset(G0): using drv /dev/dri/card0 [ 330.987] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 330.987] (II) ARMSOC(0): Creating default Display subsection in Screen section "DefaultScreen" for depth/fbbpp 24/32 [ 330.987] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32 [ 330.987] (==) ARMSOC(0): RGB weight 888 [ 330.987] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0) [ 330.987] (==) ARMSOC(0): Default visual is TrueColor [ 330.987] (II) No BusID or DriverName specified - opening /dev/dri/card0 [ 330.987] (II) Got BusID display-subsystem [ 331.020] (II) Opened DRM [ 331.020] (II) DeviceName is [/dev/dri/card0] [ 331.020] (II) bus_id is [display-subsystem] [ 331.020] (II) DriverName is [rockchip] [ 331.020] (II) version is [1.0.0] [ 331.020] (II) ARMSOC(0): Chipset: Mali [ 331.020] (II) ARMSOC(0): Buffer Flipping is Enabled [ 331.020] (II) ARMSOC(0): umplock is Enabled [ 331.020] (II) ARMSOC(0): Setting the video modes ... [ 331.020] (II) ARMSOC(0): Adding all CRTCs [ 331.020] (II) ARMSOC(0): Got CRTC: 0 (id: 60) [ 331.127] (II) ARMSOC(0): Output HDMI-1 has no monitor section [ 331.236] (II) ARMSOC(0): EDID for output HDMI-1 [ 331.236] (II) ARMSOC(0): Manufacturer: ACR Model: 3e0 Serial#: 1631642076 [ 331.236] (II) ARMSOC(0): Year: 2016 Week: 14 [ 331.236] (II) ARMSOC(0): EDID Version: 1.3 [ 331.236] (II) ARMSOC(0): Digital Display Input [ 331.236] (II) ARMSOC(0): Max Image Size [cm]: horiz.: 43 vert.: 24 [ 331.236] (II) ARMSOC(0): Gamma: 2.20 [ 331.236] (II) ARMSOC(0): DPMS capabilities: StandBy Suspend [ 331.237] (II) ARMSOC(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 331.237] (II) ARMSOC(0): First detailed timing is preferred mode [ 331.237] (II) ARMSOC(0): redX: 0.646 redY: 0.333 greenX: 0.317 greenY: 0.625 [ 331.237] (II) ARMSOC(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329 [ 331.237] (II) ARMSOC(0): Supported established timings: [ 331.237] (II) ARMSOC(0): 720x400@70Hz [ 331.237] (II) ARMSOC(0): 640x480@60Hz [ 331.237] (II) ARMSOC(0): 640x480@67Hz [ 331.237] (II) ARMSOC(0): 640x480@72Hz [ 331.237] (II) ARMSOC(0): 640x480@75Hz [ 331.237] (II) ARMSOC(0): 800x600@56Hz [ 331.237] (II) ARMSOC(0): 800x600@60Hz [ 331.238] (II) ARMSOC(0): 800x600@72Hz [ 331.238] (II) ARMSOC(0): 800x600@75Hz [ 331.238] (II) ARMSOC(0): 832x624@75Hz [ 331.238] (II) ARMSOC(0): 1024x768@60Hz [ 331.238] (II) ARMSOC(0): 1024x768@70Hz [ 331.238] (II) ARMSOC(0): 1024x768@75Hz [ 331.238] (II) ARMSOC(0): 1280x1024@75Hz [ 331.238] (II) ARMSOC(0): 1152x864@75Hz [ 331.238] (II) ARMSOC(0): Manufacturer's mask: 0 [ 331.238] (II) ARMSOC(0): Supported standard timings: [ 331.238] (II) ARMSOC(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 331.238] (II) ARMSOC(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 331.238] (II) ARMSOC(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 331.238] (II) ARMSOC(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 331.238] (II) ARMSOC(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 331.239] (II) ARMSOC(0): Supported detailed timing: [ 331.239] (II) ARMSOC(0): clock: 85.5 MHz Image Size: 434 x 236 mm [ 331.239] (II) ARMSOC(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0 [ 331.239] (II) ARMSOC(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0 [ 331.239] (II) ARMSOC(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz [ 331.239] (II) ARMSOC(0): Monitor name: K202HQL [ 331.239] (II) ARMSOC(0): Serial No: T0CAA0088512 [ 331.239] (II) ARMSOC(0): EDID (in hex): [ 331.239] (II) ARMSOC(0): 00ffffffffffff000472e003dce14061 [ 331.239] (II) ARMSOC(0): 0e1a0103802b1878ca94a5a55551a027 [ 331.240] (II) ARMSOC(0): 0f5054bfef8081c08100714f81408180 [ 331.240] (II) ARMSOC(0): 010101010101662156aa51001e30468f [ 331.240] (II) ARMSOC(0): 3300b2ec1000001e000000fd00384c1f [ 331.240] (II) ARMSOC(0): 530e000a202020202020000000fc004b [ 331.240] (II) ARMSOC(0): 32303248514c0a2020202020000000ff [ 331.240] (II) ARMSOC(0): 005430434141303038383531320a00bf [ 331.240] (II) ARMSOC(0): EDID vendor "ACR", prod id 992 [ 331.240] (II) ARMSOC(0): Using EDID range info for horizontal sync [ 331.240] (II) ARMSOC(0): Using EDID range info for vertical refresh [ 331.241] (II) ARMSOC(0): Printing DDC gathered Modelines: [ 331.241] (II) ARMSOC(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP) [ 331.241] (II) ARMSOC(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 331.241] (II) ARMSOC(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 331.242] (II) ARMSOC(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 331.243] (II) ARMSOC(0): Printing probed modes for output HDMI-1 [ 331.243] (II) ARMSOC(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP) [ 331.243] (II) ARMSOC(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 331.243] (II) ARMSOC(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 331.243] (II) ARMSOC(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 331.243] (II) ARMSOC(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 331.243] (II) ARMSOC(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 331.243] (II) ARMSOC(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 331.244] (II) ARMSOC(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 331.244] (II) ARMSOC(0): Output HDMI-1 connected [ 331.245] (II) ARMSOC(0): Using exact sizes for initial modes [ 331.245] (II) ARMSOC(0): Output HDMI-1 using initial mode 1366x768 +0+0 [ 331.245] (II) ARMSOC(0): Got KMS resources [ 331.245] (**) ARMSOC(0): Display dimensions: (430, 240) mm [ 331.245] (**) ARMSOC(0): DPI set to (80, 81) [ 331.245] (II) Loading sub module "dri2" [ 331.245] (II) LoadModule: "dri2" [ 331.245] (II) Module "dri2" already built-in [ 331.245] (II) Loading sub module "exa" [ 331.245] (II) LoadModule: "exa" [ 331.246] (II) Loading /usr/lib/xorg/modules/libexa.so [ 331.247] (II) Module exa: vendor="X.Org Foundation" [ 331.247] compiled for 1.19.2, module version = 2.6.0 [ 331.248] ABI class: X.Org Video Driver, version 23.0 [ 331.248] (II) Loading sub module "fb" [ 331.248] (II) LoadModule: "fb" [ 331.249] (II) Loading /usr/lib/xorg/modules/libfb.so [ 331.250] (II) Module fb: vendor="X.Org Foundation" [ 331.250] compiled for 1.19.2, module version = 1.0.0 [ 331.250] ABI class: X.Org ANSI C Emulation, version 0.4 [ 331.250] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32 [ 331.251] (**) modeset(G0): Option "AccelMethod" "glamor" [ 331.251] (==) modeset(G0): RGB weight 888 [ 331.251] (==) modeset(G0): Default visual is TrueColor [ 331.251] (II) Loading sub module "glamoregl" [ 331.251] (II) LoadModule: "glamoregl" [ 331.252] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 331.300] (II) Module glamoregl: vendor="X.Org Foundation" [ 331.300] compiled for 1.19.2, module version = 1.0.0 [ 331.300] ABI class: X.Org ANSI C Emulation, version 0.4 [ 331.300] (II) glamor: OpenGL accelerated X.org driver based. [ 331.528] (II) glamor: EGL version 1.4 (DRI2): [ 331.528] EGL_MESA_drm_image required. [ 331.529] (EE) modeset(G0): glamor initialization failed [ 331.529] (II) modeset(G0): ShadowFB: preferred NO, enabled NO [ 331.634] (II) modeset(G0): Output HDMI-1-1 has no monitor section [ 331.739] (II) modeset(G0): EDID for output HDMI-1-1 [ 331.739] (II) modeset(G0): Manufacturer: ACR Model: 3e0 Serial#: 1631642076 [ 331.739] (II) modeset(G0): Year: 2016 Week: 14 [ 331.739] (II) modeset(G0): EDID Version: 1.3 [ 331.739] (II) modeset(G0): Digital Display Input [ 331.739] (II) modeset(G0): Max Image Size [cm]: horiz.: 43 vert.: 24 [ 331.739] (II) modeset(G0): Gamma: 2.20 [ 331.739] (II) modeset(G0): DPMS capabilities: StandBy Suspend [ 331.739] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 331.739] (II) modeset(G0): First detailed timing is preferred mode [ 331.739] (II) modeset(G0): redX: 0.646 redY: 0.333 greenX: 0.317 greenY: 0.625 [ 331.739] (II) modeset(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329 [ 331.739] (II) modeset(G0): Supported established timings: [ 331.739] (II) modeset(G0): 720x400@70Hz [ 331.739] (II) modeset(G0): 640x480@60Hz [ 331.739] (II) modeset(G0): 640x480@67Hz [ 331.739] (II) modeset(G0): 640x480@72Hz [ 331.739] (II) modeset(G0): 640x480@75Hz [ 331.739] (II) modeset(G0): 800x600@56Hz [ 331.739] (II) modeset(G0): 800x600@60Hz [ 331.739] (II) modeset(G0): 800x600@72Hz [ 331.740] (II) modeset(G0): 800x600@75Hz [ 331.740] (II) modeset(G0): 832x624@75Hz [ 331.740] (II) modeset(G0): 1024x768@60Hz [ 331.740] (II) modeset(G0): 1024x768@70Hz [ 331.740] (II) modeset(G0): 1024x768@75Hz [ 331.740] (II) modeset(G0): 1280x1024@75Hz [ 331.740] (II) modeset(G0): 1152x864@75Hz [ 331.740] (II) modeset(G0): Manufacturer's mask: 0 [ 331.740] (II) modeset(G0): Supported standard timings: [ 331.740] (II) modeset(G0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 331.740] (II) modeset(G0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 331.740] (II) modeset(G0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 331.740] (II) modeset(G0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 331.740] (II) modeset(G0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 331.740] (II) modeset(G0): Supported detailed timing: [ 331.740] (II) modeset(G0): clock: 85.5 MHz Image Size: 434 x 236 mm [ 331.740] (II) modeset(G0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0 [ 331.740] (II) modeset(G0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0 [ 331.740] (II) modeset(G0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz [ 331.740] (II) modeset(G0): Monitor name: K202HQL [ 331.740] (II) modeset(G0): Serial No: T0CAA0088512 [ 331.740] (II) modeset(G0): EDID (in hex): [ 331.740] (II) modeset(G0): 00ffffffffffff000472e003dce14061 [ 331.740] (II) modeset(G0): 0e1a0103802b1878ca94a5a55551a027 [ 331.740] (II) modeset(G0): 0f5054bfef8081c08100714f81408180 [ 331.740] (II) modeset(G0): 010101010101662156aa51001e30468f [ 331.740] (II) modeset(G0): 3300b2ec1000001e000000fd00384c1f [ 331.740] (II) modeset(G0): 530e000a202020202020000000fc004b [ 331.740] (II) modeset(G0): 32303248514c0a2020202020000000ff [ 331.740] (II) modeset(G0): 005430434141303038383531320a00bf [ 331.741] (II) modeset(G0): Printing probed modes for output HDMI-1-1 [ 331.741] (II) modeset(G0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP) [ 331.741] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 331.741] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 331.741] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 331.741] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 331.741] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 331.741] (II) modeset(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 331.741] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 331.741] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 331.741] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 331.741] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 331.741] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 331.741] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 331.741] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 331.741] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 331.741] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 331.741] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 331.741] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0) [ 331.741] (**) modeset(G0): Display dimensions: (430, 240) mm [ 331.741] (**) modeset(G0): DPI set to (60, 81) [ 331.741] (II) Loading sub module "fb" [ 331.741] (II) LoadModule: "fb" [ 331.742] (II) Loading /usr/lib/xorg/modules/libfb.so [ 331.742] (II) Module fb: vendor="X.Org Foundation" [ 331.742] compiled for 1.19.2, module version = 1.0.0 [ 331.742] ABI class: X.Org ANSI C Emulation, version 0.4 [ 331.742] (--) Depth 24 pixmap format is 32 bpp [ 331.742] (EE) modeset(G0): drmSetMaster failed: Invalid argument [ 331.742] (EE) Fatal server error: [ 331.742] (EE) AddScreen/ScreenInit failed for gpu driver 0 -1 [ 331.742] (EE) [ 331.742] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 331.742] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 331.742] (EE) [ 331.768] (EE) Server terminated with error (1). Closing log file. This card draws its updates from debian-arm, and ayufan's git account for the rock64. Many thanks. -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: https://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s
