On Saturday 18 July 2015 02:33:22 Thomas Lübking wrote: > On Samstag, 18. Juli 2015 07:51:41 CEST, Gene Heskett wrote: > > The default seems to be 1280x768. There is a 13nnx800 mode but the > > images are bigger than the screen and circles are still smunched > > vertically. 17" AOC monitor on the machine doing the squashing. > > What are complete output of "xrandr -q", contents of > /var/log/Xorg.0.log and the exact monitor model? > > Usually the system asks monitor and IGP for supported modes and > presents you the intersection - 1280x768 is 16:9.6, but if the > monitors physical pixels aren't square, this can end up as 16:9 > > Cheers, > Thomas
Board is Intel Atom D525MW gene@shop:~$ xrandr -q Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI-1 disconnected (normal left inverted right x axis y axis) VGA-1 disconnected (normal left inverted right x axis y axis) Log:(word wrap off) gene@shop:/var/log$ cat Xorg.0.log [ 27.246] X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 27.246] X Protocol Version 11, Revision 0 [ 27.246] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian [ 27.246] Current Operating System: Linux shop 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686 [ 27.246] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4-9-rtai-686-pae root=UUID=ef74047c-6f7e-4e27-93f3-917d36ca8b2c ro initrd=/install/gtk/initrd.gz lapic isolcpus=1 rootdelay=5 [ 27.246] Build Date: 09 February 2015 10:12:47AM [ 27.246] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcris...@debian.org>) [ 27.247] Current version of pixman: 0.26.0 [ 27.247] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 27.247] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 27.247] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 28 14:27:22 2015 [ 27.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 27.318] (==) No Layout section. Using the first Screen section. [ 27.318] (==) No screen section available. Using defaults. [ 27.318] (**) |-->Screen "Default Screen Section" (0) [ 27.318] (**) | |-->Monitor "<default monitor>" [ 27.319] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 27.319] (==) Automatically adding devices [ 27.319] (==) Automatically enabling devices [ 27.354] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 27.354] Entry deleted from font path. [ 27.358] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 27.358] Entry deleted from font path. [ 27.358] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 27.358] (==) ModulePath set to "/usr/lib/xorg/modules" [ 27.358] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 27.358] (II) Loader magic: 0xb77ea5a0 [ 27.358] (II) Module ABI versions: [ 27.358] X.Org ANSI C Emulation: 0.4 [ 27.358] X.Org Video Driver: 12.1 [ 27.358] X.Org XInput driver : 16.0 [ 27.358] X.Org Server Extension : 6.0 [ 27.360] (--) PCI:*(0:0:2:0) 8086:a001:8086:574d rev 2, Mem @ 0xf0300000/524288, 0xe0000000/268435456, 0xf0200000/1048576, I/O @ 0x000020c0/8 [ 27.360] (II) Open ACPI successful (/var/run/acpid.socket) [ 27.360] (II) LoadModule: "extmod" [ 27.363] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 27.377] (II) Module extmod: vendor="X.Org Foundation" [ 27.377] compiled for 1.12.4, module version = 1.0.0 [ 27.377] Module class: X.Org Server Extension [ 27.377] ABI class: X.Org Server Extension, version 6.0 [ 27.378] (II) Loading extension SELinux [ 27.378] (II) Loading extension MIT-SCREEN-SAVER [ 27.378] (II) Loading extension XFree86-VidModeExtension [ 27.378] (II) Loading extension XFree86-DGA [ 27.378] (II) Loading extension DPMS [ 27.378] (II) Loading extension XVideo [ 27.378] (II) Loading extension XVideo-MotionCompensation [ 27.378] (II) Loading extension X-Resource [ 27.378] (II) LoadModule: "dbe" [ 27.378] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 27.389] (II) Module dbe: vendor="X.Org Foundation" [ 27.389] compiled for 1.12.4, module version = 1.0.0 [ 27.389] Module class: X.Org Server Extension [ 27.389] ABI class: X.Org Server Extension, version 6.0 [ 27.389] (II) Loading extension DOUBLE-BUFFER [ 27.389] (II) LoadModule: "glx" [ 27.390] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 27.409] (II) Module glx: vendor="X.Org Foundation" [ 27.409] compiled for 1.12.4, module version = 1.0.0 [ 27.409] ABI class: X.Org Server Extension, version 6.0 [ 27.409] (==) AIGLX enabled [ 27.409] (II) Loading extension GLX [ 27.409] (II) LoadModule: "record" [ 27.410] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 27.551] (II) Module record: vendor="X.Org Foundation" [ 27.551] compiled for 1.12.4, module version = 1.13.0 [ 27.551] Module class: X.Org Server Extension [ 27.551] ABI class: X.Org Server Extension, version 6.0 [ 27.551] (II) Loading extension RECORD [ 27.551] (II) LoadModule: "dri" [ 27.552] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 27.620] (II) Module dri: vendor="X.Org Foundation" [ 27.620] compiled for 1.12.4, module version = 1.0.0 [ 27.620] ABI class: X.Org Server Extension, version 6.0 [ 27.620] (II) Loading extension XFree86-DRI [ 27.620] (II) LoadModule: "dri2" [ 27.621] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 27.639] (II) Module dri2: vendor="X.Org Foundation" [ 27.639] compiled for 1.12.4, module version = 1.2.0 [ 27.639] ABI class: X.Org Server Extension, version 6.0 [ 27.639] (II) Loading extension DRI2 [ 27.639] (==) Matched intel as autoconfigured driver 0 [ 27.639] (==) Matched vesa as autoconfigured driver 1 [ 27.639] (==) Matched fbdev as autoconfigured driver 2 [ 27.639] (==) Assigned the driver to the xf86ConfigLayout [ 27.639] (II) LoadModule: "intel" [ 27.640] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 27.670] (II) Module intel: vendor="X.Org Foundation" [ 27.670] compiled for 1.12.3.902, module version = 2.19.0 [ 27.670] Module class: X.Org Video Driver [ 27.670] ABI class: X.Org Video Driver, version 12.1 [ 27.670] (II) LoadModule: "vesa" [ 27.670] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 27.677] (II) Module vesa: vendor="X.Org Foundation" [ 27.677] compiled for 1.12.1, module version = 2.3.1 [ 27.677] Module class: X.Org Video Driver [ 27.678] ABI class: X.Org Video Driver, version 12.0 [ 27.678] (II) LoadModule: "fbdev" [ 27.678] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 27.699] (II) Module fbdev: vendor="X.Org Foundation" [ 27.699] compiled for 1.12.1, module version = 0.4.2 [ 27.699] ABI class: X.Org Video Driver, version 12.0 [ 27.699] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 27.700] (II) VESA: driver for VESA chipsets: vesa [ 27.700] (II) FBDEV: driver for framebuffer: fbdev [ 27.700] (++) using VT number 7 [ 27.704] (WW) Falling back to old probe method for vesa [ 27.704] (WW) Falling back to old probe method for fbdev [ 27.704] (II) Loading sub module "fbdevhw" [ 27.704] (II) LoadModule: "fbdevhw" [ 27.705] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 27.706] (II) Module fbdevhw: vendor="X.Org Foundation" [ 27.706] compiled for 1.12.4, module version = 0.0.2 [ 27.706] ABI class: X.Org Video Driver, version 12.1 [ 27.707] drmOpenDevice: node name is /dev/dri/card0 [ 27.707] drmOpenDevice: open result is 9, (OK) [ 27.707] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 27.707] drmOpenDevice: node name is /dev/dri/card0 [ 27.707] drmOpenDevice: open result is 9, (OK) [ 27.707] drmOpenByBusid: drmOpenMinor returns 9 [ 27.707] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 27.707] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 27.707] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 27.707] (==) intel(0): RGB weight 888 [ 27.707] (==) intel(0): Default visual is TrueColor [ 27.707] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 27.707] (--) intel(0): Chipset: "Pineview G" [ 27.707] (**) intel(0): Relaxed fencing enabled [ 27.707] (**) intel(0): Wait on SwapBuffers? enabled [ 27.707] (**) intel(0): Triple buffering? enabled [ 27.707] (**) intel(0): Framebuffer tiled [ 27.708] (**) intel(0): Pixmaps tiled [ 27.708] (**) intel(0): 3D buffers tiled [ 27.708] (**) intel(0): SwapBuffers wait enabled [ 27.708] (==) intel(0): video overlay key set to 0x101fe [ 27.709] (II) intel(0): Output LVDS1 has no monitor section [ 27.709] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 27.752] (II) intel(0): Output VGA1 has no monitor section [ 27.752] (II) intel(0): EDID for output LVDS1 [ 27.753] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 27.753] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 27.753] (II) intel(0): Printing probed modes for output LVDS1 [ 27.753] (II) intel(0): Modeline "1280x800"x58.1 68.90 1280 1292 1340 1440 800 804 807 823 -hsync -vsync (47.8 kHz P) [ 27.753] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 27.753] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 27.753] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 27.753] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 27.787] (II) intel(0): EDID for output VGA1 [ 27.788] (II) intel(0): Manufacturer: AOC Model: 1831 Serial#: 51265 [ 27.788] (II) intel(0): Year: 2010 Week: 26 [ 27.788] (II) intel(0): EDID Version: 1.3 [ 27.788] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 27.788] (II) intel(0): Sync: Separate [ 27.788] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 23 [ 27.788] (II) intel(0): Gamma: 2.20 [ 27.788] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 27.788] (II) intel(0): First detailed timing is preferred mode [ 27.788] (II) intel(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607 [ 27.788] (II) intel(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329 [ 27.788] (II) intel(0): Supported established timings: [ 27.788] (II) intel(0): 720x400@70Hz [ 27.788] (II) intel(0): 640x480@60Hz [ 27.788] (II) intel(0): 640x480@67Hz [ 27.788] (II) intel(0): 640x480@72Hz [ 27.788] (II) intel(0): 640x480@75Hz [ 27.788] (II) intel(0): 800x600@56Hz [ 27.788] (II) intel(0): 800x600@60Hz [ 27.789] (II) intel(0): 800x600@72Hz [ 27.789] (II) intel(0): 800x600@75Hz [ 27.789] (II) intel(0): 832x624@75Hz [ 27.789] (II) intel(0): 1024x768@60Hz [ 27.789] (II) intel(0): 1024x768@70Hz [ 27.789] (II) intel(0): 1024x768@75Hz [ 27.789] (II) intel(0): Manufacturer's mask: 0 [ 27.789] (II) intel(0): Supported standard timings: [ 27.789] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609 [ 27.789] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553 [ 27.789] (II) intel(0): Supported detailed timing: [ 27.789] (II) intel(0): clock: 85.5 MHz Image Size: 413 x 234 mm [ 27.789] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0 [ 27.789] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0 [ 27.789] (II) intel(0): Supported detailed timing: [ 27.789] (II) intel(0): clock: 85.5 MHz Image Size: 34 x 19 mm [ 27.789] (II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0 [ 27.789] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0 [ 27.789] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 95 MHz [ 27.789] (II) intel(0): Monitor name: 831W [ 27.789] (II) intel(0): EDID (in hex): [ 27.789] (II) intel(0): 00ffffffffffff0005e3311841c80000 [ 27.789] (II) intel(0): 1a140103682917782aeed1a555489b26 [ 27.789] (II) intel(0): 125054bfee00310a614c010101010101 [ 27.789] (II) intel(0): 010101010101662156aa51001e30468f [ 27.789] (II) intel(0): 33009dea1000001e662150b051001b30 [ 27.790] (II) intel(0): 4070360022130000001e000000fd0037 [ 27.790] (II) intel(0): 4b1e5109000a202020202020000000fc [ 27.790] (II) intel(0): 00383331570a2020202020202020003e [ 27.790] (II) intel(0): Printing probed modes for output VGA1 [ 27.790] (II) intel(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP) [ 27.790] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 27.790] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 27.790] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz) [ 27.790] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 27.790] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 27.790] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 27.790] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 27.790] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 27.790] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 27.790] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 27.790] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 27.790] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 27.790] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 27.790] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 27.790] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 27.790] (II) intel(0): Output LVDS1 connected [ 27.790] (II) intel(0): Output VGA1 connected [ 27.791] (II) intel(0): Using fuzzy aspect match for initial modes [ 27.791] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 27.791] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 27.791] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 27.791] (II) intel(0): Kernel page flipping support detected, enabling [ 27.791] (==) intel(0): DPI set to (96, 96) [ 27.791] (II) Loading sub module "fb" [ 27.791] (II) LoadModule: "fb" [ 27.791] (II) Loading /usr/lib/xorg/modules/libfb.so [ 27.808] (II) Module fb: vendor="X.Org Foundation" [ 27.808] compiled for 1.12.4, module version = 1.0.0 [ 27.808] ABI class: X.Org ANSI C Emulation, version 0.4 [ 27.808] (II) Loading sub module "dri2" [ 27.808] (II) LoadModule: "dri2" [ 27.809] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 27.809] (II) Module dri2: vendor="X.Org Foundation" [ 27.809] compiled for 1.12.4, module version = 1.2.0 [ 27.809] ABI class: X.Org Server Extension, version 6.0 [ 27.809] (II) UnloadModule: "vesa" [ 27.809] (II) Unloading vesa [ 27.809] (II) UnloadModule: "fbdev" [ 27.809] (II) Unloading fbdev [ 27.809] (II) UnloadSubModule: "fbdevhw" [ 27.809] (II) Unloading fbdevhw [ 27.809] (==) Depth 24 pixmap format is 32 bpp [ 27.810] (II) intel(0): [DRI2] Setup complete [ 27.810] (II) intel(0): [DRI2] DRI driver: i915 [ 27.810] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 27.820] (II) UXA(0): Driver registered support for the following operations: [ 27.820] (II) solid [ 27.820] (II) copy [ 27.820] (II) composite (RENDER acceleration) [ 27.820] (II) put_image [ 27.820] (II) get_image [ 27.820] (==) intel(0): Backing store disabled [ 27.820] (==) intel(0): Silken mouse enabled [ 27.820] (II) intel(0): Initializing HW Cursor [ 27.820] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 27.823] (==) intel(0): DPMS enabled [ 27.823] (==) intel(0): Intel XvMC decoder disabled [ 27.823] (II) intel(0): Set up textured video [ 27.823] (II) intel(0): Set up overlay video [ 27.823] (II) intel(0): direct rendering: DRI2 Enabled [ 27.823] (==) intel(0): hotplug detection: "enabled" [ 28.280] (--) RandR disabled [ 28.280] (II) Initializing built-in extension Generic Event Extension [ 28.280] (II) Initializing built-in extension SHAPE [ 28.280] (II) Initializing built-in extension MIT-SHM [ 28.280] (II) Initializing built-in extension XInputExtension [ 28.280] (II) Initializing built-in extension XTEST [ 28.280] (II) Initializing built-in extension BIG-REQUESTS [ 28.280] (II) Initializing built-in extension SYNC [ 28.280] (II) Initializing built-in extension XKEYBOARD [ 28.280] (II) Initializing built-in extension XC-MISC [ 28.280] (II) Initializing built-in extension SECURITY [ 28.280] (II) Initializing built-in extension XINERAMA [ 28.280] (II) Initializing built-in extension XFIXES [ 28.280] (II) Initializing built-in extension RENDER [ 28.280] (II) Initializing built-in extension RANDR [ 28.280] (II) Initializing built-in extension COMPOSITE [ 28.280] (II) Initializing built-in extension DAMAGE [ 28.280] (II) SELinux: Disabled on system [ 28.429] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 28.429] (II) AIGLX: enabled GLX_INTEL_swap_event [ 28.429] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 28.429] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 28.430] (II) AIGLX: Loaded and initialized i915 [ 28.430] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 28.431] (II) intel(0): Setting screen physical size to 270 x 203 [ 28.754] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 28.754] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 28.754] (II) LoadModule: "evdev" [ 28.754] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 28.786] (II) Module evdev: vendor="X.Org Foundation" [ 28.786] compiled for 1.12.1, module version = 2.7.0 [ 28.786] Module class: X.Org XInput Driver [ 28.786] ABI class: X.Org XInput driver, version 16.0 [ 28.786] (II) Using input driver 'evdev' for 'Power Button' [ 28.786] (**) Power Button: always reports core events [ 28.787] (**) evdev: Power Button: Device: "/dev/input/event3" [ 28.787] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 28.787] (--) evdev: Power Button: Found keys [ 28.787] (II) evdev: Power Button: Configuring as keyboard [ 28.787] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 28.787] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 28.787] (**) Option "xkb_rules" "evdev" [ 28.787] (**) Option "xkb_model" "pc105" [ 28.787] (**) Option "xkb_layout" "us" [ 28.789] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 28.789] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 28.789] (II) Using input driver 'evdev' for 'Sleep Button' [ 28.789] (**) Sleep Button: always reports core events [ 28.789] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 28.789] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 28.789] (--) evdev: Sleep Button: Found keys [ 28.789] (II) evdev: Sleep Button: Configuring as keyboard [ 28.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2" [ 28.789] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 28.789] (**) Option "xkb_rules" "evdev" [ 28.789] (**) Option "xkb_model" "pc105" [ 28.789] (**) Option "xkb_layout" "us" [ 28.791] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4) [ 28.791] (II) No input driver specified, ignoring this device. [ 28.791] (II) This device may have been added with another device file. [ 28.792] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5) [ 28.792] (II) No input driver specified, ignoring this device. [ 28.792] (II) This device may have been added with another device file. [ 28.792] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6) [ 28.792] (II) No input driver specified, ignoring this device. [ 28.793] (II) This device may have been added with another device file. [ 28.793] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 28.793] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 28.794] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 28.794] (**) Logitech USB Optical Mouse: always reports core events [ 28.794] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 28.794] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a [ 28.794] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 28.794] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 28.794] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 28.794] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 28.794] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 28.794] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 28.794] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 28.794] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 28.794] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1" [ 28.794] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8) [ 28.794] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 28.795] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 28.795] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 28.795] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 28.795] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 28.796] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 28.796] (II) No input driver specified, ignoring this device. [ 28.796] (II) This device may have been added with another device file. [ 28.797] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event7) [ 28.797] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall" [ 28.797] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera' [ 28.797] (**) USB 2.0 PC Camera: always reports core events [ 28.797] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event7" [ 28.797] (--) evdev: USB 2.0 PC Camera: Vendor 0x58f Product 0x5608 [ 28.797] (--) evdev: USB 2.0 PC Camera: Found keys [ 28.797] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard [ 28.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7/event7" [ 28.797] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 9) [ 28.797] (**) Option "xkb_rules" "evdev" [ 28.797] (**) Option "xkb_model" "pc105" [ 28.797] (**) Option "xkb_layout" "us" [ 28.799] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 28.799] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 28.799] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 28.799] (**) AT Translated Set 2 keyboard: always reports core events [ 28.799] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 28.799] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 28.799] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 28.799] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 28.799] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 28.799] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 28.799] (**) Option "xkb_rules" "evdev" [ 28.799] (**) Option "xkb_model" "pc105" [ 28.800] (**) Option "xkb_layout" "us" [ 28.802] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8) [ 28.802] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 28.802] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 28.802] (**) ACPI Virtual Keyboard Device: always reports core events [ 28.802] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event8" [ 28.802] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 28.802] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 28.802] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 28.802] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8" [ 28.802] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 11) [ 28.802] (**) Option "xkb_rules" "evdev" [ 28.802] (**) Option "xkb_model" "pc105" [ 28.802] (**) Option "xkb_layout" "us" [4249252.953] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [4249253.384] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [4249357.502] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled I have space separated the monitor EDID to ID the monitor as it was discovered. All this is from an ssh -Y login. I am not physically at the monitor, and its rather crowded around it, would be difficult to turn it around and get the model off the sticker. I can later, after the coffee kicks in ;) > > _______________________________________________ > xorg@lists.x.org: X.Org support > Archives: http://lists.freedesktop.org/archives/xorg > Info: http://lists.x.org/mailman/listinfo/xorg > Your subscription address: %(user_address)s Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s
