VNC is my current temporary replacement solution. But I definitely prefer X, which is much more integrated in my desktop and work much better on multiple screens.
If I cannot make X work in Fedora 19, then I plan to install Fedora 18 instead. VNC is not a satisfying solution to me. On 5 September 2013 23:49, Sérgio Basto <ser...@serjux.com> wrote: > On Qui, 2013-09-05 at 23:30 +0200, Kenneth Brun Nielsen wrote: > > Actually I use ssh -X, but just tried with ssh -Y and it didnt change > > anything. > > > > > > The firewall has no influence either. > > > > > > Thanks for your suggestions. > > Since application runs on server, I suggest use vncserver on Centos 5 , > and vncviewer on your machine, it don't fix the problem, but work much > better that X forwarding.. > > > > On 5 September 2013 22:12, Sérgio Basto <ser...@serjux.com> wrote: > > On Qui, 2013-09-05 at 21:49 +0200, Kenneth Brun Nielsen wrote: > > > Hi Sergio, > > > > > > > > > Thanks for your response. > > > > > > > > > Yum distro-sync only changes some irrelevant (my humble > > judgement) > > > packages - see bottom list. > > > > > > OK, I agree , you have X updated, > > > > > > > > Notice, that Cadence ( http://www.cadence.com/ ) is > > installed at > > > another host, which is Centos 5, i.e. it is not a local > > installation. > > > I have no reason to believe, that a reinstallation will > > change > > > anything. It works on all other tested clients, e.g. Windows > > Xming > > > Xserver, Centos 5/6, Ubuntu 12 and - as mentioned - Fedora > > 17. And I > > > tried on to different installation servers (Centos 5 and > > RHEL5). > > > > > > > agree , you do X forwarding with ssh -Y ? > > and about systemctl status firewalld ? > > you may try disable firewall with > > systemctl stop firewalld > > > > I think I can't help you further ... > > > > > > PS: Received spam from j...@eukor.com as reply on my previous > > mail to > > > this mailing list. > > > > > > > > > Best regards, > > > > > > Kenneth > > > > > > -- > > > > > > > > > > > > $ yum distro-sync > > > > > > ================================================================================ > > > Package Arch Version > > Repository > > > Size > > > > > > > > > ================================================================================ > > > > > > Downgrading: > > > ffmpeg-libs x86_64 1.2.1-3.fc19 > > > rpmfusion-free 3.7 M > > > gstreamer-ffmpeg x86_64 0.10.13-8.fc19 > > > rpmfusion-free 2.8 M > > > gstreamer1-libav x86_64 1.0.6-1.fc19 > > > rpmfusion-free 2.8 M > > > gstreamer1-plugins-bad-freeworld > > > x86_64 1.0.6-1.fc19 > > > rpmfusion-free 157 k > > > gstreamer1-plugins-ugly x86_64 1.0.6-2.fc19 > > > rpmfusion-free 237 k > > > mencoder x86_64 1.1-8.20130416svn.fc19 > > > rpmfusion-free 832 k > > > mplayer x86_64 1.1-8.20130416svn.fc19 > > > rpmfusion-free 1.1 M > > > mplayer-common x86_64 1.1-8.20130416svn.fc19 > > > rpmfusion-free 1.2 M > > > skype i586 2.1.0.81-fc10 > > skype > > > 19 M > > > > > > > > > > > > On 5 September 2013 20:42, Sérgio Basto <ser...@serjux.com> > > wrote: > > > On Qui, 2013-09-05 at 18:49 +0200, Kenneth Brun > > Nielsen wrote: > > > > I run a program (Cadence IC6, which is Qt-based) > > on a remote > > > machine > > > > through SSH with X11 forwarding. > > > > > > > > After updating my client machine from Fedora17 to > > Fedora19 > > > 64-bit (X > > > > version is 1.14.2-9, I believe - or please advice > > how I can > > > check), I > > > > get some errors when running the program. > > > > > > > > Here is a transcript of parts of the log: > > > > -- > > > > Xlib: sequence lost (0x107f2 > 0x19ab) in reply > > type 0x0! > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 113 (X_KillClient) > > > > Resource id: 0x18b0000 > > > > Xlib: sequence lost (0x10000 > 0x19ab) in > > reply type > > > 0x0! > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0xff7ff87f > > > > Xlib: sequence lost (0x10000 > 0x19ac) in > > reply type > > > 0x2! > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > Xlib: sequence lost (0x10000 > 0x19b3) in > > reply type > > > 0x0! > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > libManager Qt Warning: X Error: 0 0 > > > > Major opcode: 0 () > > > > Resource id: 0x0 > > > > Xlib: sequence lost (0x1411c > 0x19b3) in > > reply type > > > 0x1c! > > > > Xlib: sequence lost (0x1230f > 0x19b3) in > > reply type > > > 0xf! > > > > Xlib: sequence lost (0x10201 > 0x19b3) in > > reply type > > > 0x1! > > > > libManager Qt Warning: Qt-subapplication: > > Fatal IO > > > error: client > > > > killed > > > > -- > > > > > > > > > > > > Also it is reflected in the dmesg of the server: > > > > "libSelect[27710]: segfault at 0000000000000000 > > rip > > > 00000000081db391 > > > > rsp 00000000ffba5380 error 4" > > > > > > > > > > > > Well, any idea why I get these errors? And how I > > can debug > > > or get rid > > > > of them? I assume the problem is either Qt- or > > X-related, > > > but honestly > > > > I don't know much of these things. > > > > > > > > > > > > Can it be a bug in X? Notice, that everything > > worked fine, > > > when I was > > > > using Fedora 17, so a change in Fedora 19 (X or > > Qt) provoked > > > the > > > > error. Also notice, that I'm not a developer and > > have close > > > to no > > > > insight into X (might be obvious from the > > above:)). > > > > > > > > > > > > Any suggestions will be appreciated. > > > > > > > > > > > > FYI, I also posted here (several days ago - still > > no > > > answers): > > > > > > http://forums.fedoraforum.org/showthread.php?t=293621 > > > > http://qt-project.org/forums/viewthread/31831/ > > > > > > > > > > http://www.cadence.com/community/forums/T/27151.aspx > > > > > > > > > > > > > > in Fedora as root do: > > > yum distro-sync > > > and explain us how you install cadence ? maybe > > reinstall it. > > > -- > > > Sérgio M. B. > > > > > > > > > > > > > > > -- > > Sérgio M. B. > > -- > Sérgio M. B. > > _______________________________________________ > xorg@lists.x.org: X.Org support > Archives: http://lists.freedesktop.org/archives/xorg > Info: http://lists.x.org/mailman/listinfo/xorg > Your subscription address: subscripti...@brun.dk >
_______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.x.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com
