On Fri, Dec 28, 2012 at 01:22:44AM -0800, Sebastian Glita wrote: > > Hi, > > The Smart Cat device is recognized with the evdev driver correctly, but it > does not respond, although it is enabled.
it's not quite detected correctly, looking at the axis labels this device looks like a standard USB mouse (two relative axes, one wheel, three buttons). for evdev/synaptics to treat this properly, the device needs ABS_X/Y and BTN_TOOL_FINGER. so really, you need to add support for this device to the kernel drivers. Cheers, Peter > > >> Is it recognized with the latest sources from cgit.freedesktop.org > >> (mouse, > > evdev, synaptics)? > > > > the main question is whether it is supported by the kernel. X hardly deals > > with touchpads directly these days, it's handled by the (linux) kernel and > > we see the evdev interface. So you need to first check if the kernel > > supports it. > > > >> Do the 4-buttons work? The scroll? > > > > yes, likely, if the kernel supports the touchpad. > > You're right. > > > > >> Do the "advanced gestures" work? > > > > no, only scrolling. gestures are implemented on the client-side, so these > > must be implemented by your client-stack (which may already do so, e.g. > > newer GTK and Unity) > > You are here right too: with the `synaptics-test' program, there are 3 > buttons, but total of seven combined, motion and only vertical scrolling > works. > > It seems the touchpad is quite simple. > > Smart Cat stream is very direct (thanks Jan for synaptics-test): > byte 0: 0x01-left, 0x02-right|toprightcorner, 0x04-side, > 0x03-left+right|toprightcorner, 0x05-left+side, > 0x06-side+right|toprightcorner, > 0x07-left+side+right|toprightcorner, > byte 1: relative signed horizontal motion, > byte 2: relative signed vertical motion, > byte 3: relative signed vertical scroll, > byte 4 ... 12: 0x00. > > The driver that binds it is usbhid. But how do I make it active? > Thanks, > Sebastian > > user@localhost ~ $ xinput list-props 10 > > Device 'Cirque Corporation 9925 AG Touchpad': > Device Enabled (132): 1 > Coordinate Transformation Matrix (134): 1.000000, 0.000000, 0.000000, > 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 > Device Accel Profile (265): 0 > Device Accel Constant Deceleration (266): 1.000000 > Device Accel Adaptive Deceleration (267): 1.000000 > Device Accel Velocity Scaling (268): 10.000000 > Device Product ID (250): 1160, 641 > Device Node (251): "/dev/input/event19" > Evdev Axis Inversion (269): 0, 0 > Evdev Axes Swap (271): 0 > Axis Labels (272): "Rel X" (142), "Rel Y" (143), "Rel Vert Wheel" (264) > Button Labels (273): "Button Left" (135), "Button Middle" (136), > "Button Right" (137), "Button Wheel Up" (138), "Button Wheel Down" (139), > "Button Horiz Wheel Left" (140), "Button Horiz Wheel Right" (141) > Evdev Middle Button Emulation (274): 0 > Evdev Middle Button Timeout (275): 50 > Evdev Third Button Emulation (276): 0 > Evdev Third Button Emulation Timeout (277): 1000 > Evdev Third Button Emulation Button (278): 3 > Evdev Third Button Emulation Threshold (279): 20 > Evdev Wheel Emulation (280): 0 > Evdev Wheel Emulation Axes (281): 0, 0, 4, 5 > Evdev Wheel Emulation Inertia (282): 10 > Evdev Wheel Emulation Timeout (283): 200 > Evdev Wheel Emulation Button (284): 4 > Evdev Drag Lock Buttons (285): 0 > > > > > Cheers, > > Peter > > > > _______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.x.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com
