Dnia czwartek, 1 listopada 2012, Henrik Pauli napisał:
[...]
> > Check "xrandr -q" for supported modes, outputs and current mode and
> > use "xrandr --output DVI-I-1 --mode 1600x1200 --scale 1x1" to set it
> >
> > This blurring would however impact absolutely everything, every font
> > in every window and every other content.
>
> --scale has nothing to do with the final scaling, you might be thinking
> about --set "scaling mode" $mode, which is about how the HW should
> behave with non-native resolutions. At least that's the case with LVDS
> outputs, not sure if my DVI has such, I don't have such an output
> available right this moment. $mode is as follows:
>
> • "Center" will not stretch at all and 1 px will be 1 px.
> • "Full" will stretch the image to the full available space of the
> display, with no regard for the aspect.
> • "Full aspect" will stretch the image until one side is as big as the
> display, aspect is retained as normal.
>
> The last two modes can show up very blurry or just plain odd, depending
> on the smoothing done by the display.
>
> To list the current scaling mode, try xrandr --verbose
Here it is (just a part):
$ xrandr
Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 8192 x 8192
DVI-I-1 connected 1600x1200+0+0 (0x64) normal (normal left inverted right x
axis y axis) 352mm x 264mm
Identifier: 0x61
Timestamp: 2558459
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff004c2d2f0039315141
200c01036f241b5e2b0299a057499926
13484cffff803140455961598199a94f
a959d140e145863d00c05100304040a0
130060081100001e000000fd0032a01e
6e1d000a202020202020000000fc0053
796e634d61737465720a2020000000ff
00483252543830303832390a20200025
1600x1200 (0x64) 229.5MHz +HSync +VSync *current +preferred
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock
106.2KHz
v: height 1200 start 1201 end 1204 total 1250 clock
85.0Hz
1280x1024 (0x65) 157.5MHz +HSync +VSync +preferred
h: width 1280 start 1344 end 1504 total 1728 skew 0 clock
91.1KHz
v: height 1024 start 1025 end 1028 total 1072 clock
85.0Hz
[...]
--
Łukasz Maśko _o)
Lukasz.Masko(at)ipipan.waw.pl /\\
Registered Linux User #61028 _\_V
Ubuntu: staroafrykańskie słowo oznaczające "Nie umiem zainstalować Debiana"
_______________________________________________
xorg@lists.x.org: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: http://lists.x.org/mailman/listinfo/xorg
Your subscription address: arch...@mail-archive.com
