On Fri, 4 Feb 2005, Aaron Yang wrote:
> hi everyone,
>
> i'm using xfree86 v4.3.0, redhat 9 and ati rage pro
> 8mb agp g.accel.
>
> everything works fine when i boot in linux kernel
> 2.4.20.
>
> after compiling and booting into linux-2.4.20-rtl, i
> can't start my X Server and i get the following
> errors. pls help, thanks!
> (!!) More than one primary device found
> (--) PCI: (0:14:0) unknown vendor (0x1274) unknown
> chipset (0x5880) rev 2, I/O @ 0x1080/6
> (--) PCI: (1:0:0) ATI Technologies Inc Rage 128 RL/VR
> AGP rev 0, Mem @ 0xf8000000/26, 0xf0100000/14, I/O @
> 0x9000/8
This looks like either a bug in your sound card, or more
likely a motherboard bios bug. Perhaps your previous kernel
had a workaround for this while your upgraded kernel did not.
Anyhow, what happened is that your motherboard marked your
sound card as the primary display card. If you look at /proc/pci
it probably identified your sound card as a VGA controller.
A workaround would be to specify the bus id explicitly in
the Section "Device" of the XF86Config file. Eg.:
BusID "PCI:1:0:0"
In absence of the explicit bus ID, XFree86 is defaulting to
the primary display device, which in this case, happens to be
your sound card :)
Mark.
Mark.
_______________________________________________
XFree86 mailing list
[email protected]
http://XFree86.Org/mailman/listinfo/xfree86