Error "fatal server error" running XFree86 3.3.6 on my Debian 3.0 using a
Cirrus Logic card with 800x600x256 mode.
If i run whith 640x480x256 configuration mode all work fine.
Extract of XF86config:
ection "Device"
Identifier "Cirrus"
VendorName "CirrusLogic"
BoardName "GD5420"
#VideoRam 512
# Device section for Cirrus Logic GD5420/2/4/6/8/9-based cards.
#MemBase 0x00e00000
#MemBase 0x04e00000
#Option "linear"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
# Clocks 25.23 28.32 0.00 0.00 31.50
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
# Use Device "Generic VGA" for Standard VGA 320x200x256
#Device "Generic VGA"
Device "Cirrus"
Monitor "Compaq"
Subsection "Display"
Depth 8
# Omit the Modes line for the "Generic VGA" device
Modes "800x600" (IF I PUT HERE 640X480 THE XSERVER RUN WELL)
ViewPort 0 0
# Use Virtual 320 200 for Generic VGA
EndSubsection
XSERVER LOG :
X: unable to open wrapper config file /etc/X11/Xwrapper.config
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us_intl)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) SVGA: Graphics device ID: "Cirrus"
(**) SVGA: Monitor ID: "Compaq"
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:un
scaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Spe
edo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11
R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: chipset: clgd5420
(--) SVGA: videoram: 512k
(--) SVGA: clocks: 25.23 28.32 0.00 0.00 31.50
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 34.167 MHz
(--) SVGA: There is no defined dot-clock matching mode "800x600"
Fatal server error:
No valid modes found.
Could help me anyone??
RGDS
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
