I'm running version 4.3 of Xfree86 ----- Original Message ----- From: "Brinsy" <[EMAIL PROTECTED]> To: "Dustin Lang" <[EMAIL PROTECTED]> Sent: Saturday, October 25, 2003 1:29 PM Subject: Re: [XFree86] NVidia GeForce FX Go 5200 - Success!
> Can you help me get my graphics working. I'm using NVIdia GeForce FX 5200. > The monitor is Gnr 153. I've tried to configure Xfree86 but it still doesn't > work. I've also downloaded the driver for AMD 64 from nvidia. I have an > athlon processor AMD athlon 2400 XP. I've attached my configuration and log > files. > > Please help. > > Thanks and regards, > Brian. > > > > > ----- Original Message ----- > From: "Dustin Lang" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, October 25, 2003 1:08 AM > Subject: [XFree86] NVidia GeForce FX Go 5200 - Success! > > > > Hi, > > > > I just wanted to let the relevant people know that the "nv" driver works > > on the NVidia GeForce FX Go 5200 chip. This is the graphics card shipping > > in the new PowerBook G4 12" 1GHz machines. I am running the CVS snapshot > > from yesterday, and the driver appears to not know about this specific > > chip, but it runs nicely. I haven't tested it much, since I'm just > > getting my system set up, but I will report any oddities I find. > > > > The details: > > > > My XF86Config file just has > > > > ############################# > > Section "Device" > > Identifier "NV" > > Driver "nv" > > EndSection > > ############################# > > > > And at startup, X reports (please excuse typos, I haven't got wireless or > > wired ethernet working at school yet...; many lines excluded): > > > > (--) PCI:*(0:16:0) nVidia Corporation unknown chipset (0x0329) rev 161, > > Mem @ 0x91000000/24, 0xa0000000/27, BIOS @ 0x90000000/17 > > (II) Loading [...]/nv_drv.o > > compiled for 4.3.99.14, module version = 1.0.1 > > (II) NV: driver for NVIDIA chipsets: [...] > > (--) Chipset 0x0329 found > > (--) NV(0): Chipset: "0x0329" > > (--) NV(0): VideoRAM: 32768 kBytes > > > > > > I'd be happy to provide any additional info. > > > > Many thanks to the nv developers and the rest of the XFree86 team! > > > > Cheers, > > dstn. > > > > _______________________________________________ > > XFree86 mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/xfree86 > > >
XFree86.0.log
Description: Binary data
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "GNR F153"
DisplaySize 300 230
HorizSync 30.0-60.0
VertRefresh 50.0-75.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "nvidia"
BoardName "Nvidia driver (generic)"
option "Backingstore" "On"
BUSID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
