For the GeForce4 Ti you'll either want to use NVIDIA's binary 
Linux drivers, which will work with your current XFree86 version,
or you'll want to upgrade to XFree86 4.3 and use the "nv" driver.
With the "nv" driver in XFree86 4.3 you may need to specify
  Option "CrtcNumber" "1"
if it is displaying a black screen.  The driver has a difficult
time figuring out which head to use when a flat panel is attached,
and the DVI connector is frequently on connector 1 rather than 0.

                        Mark.

On Wed, 23 Jul 2003 [EMAIL PROTECTED] wrote:

> 
> 
> 
> 
> 
> Attached are my log files which were generated from my red Hat Linux 8.0
> system.  The system does boot, but only in a text mode display.  The GUI
> does not load correctly.  The display I'm using is an HP TFT5600 RKM
> device....1U rack mounted keyboard, mouse and LCD display.  Attached are
> the two current log files from the crash.  Please respond.
> 
> - Dave
> 
> David J. Fragiacomo
> Pitney Bowes - TechCentral
> Phone: 203-326-6295
> Fax: 203-326-6208
> Email: [EMAIL PROTECTED]
> 
> (See attached file: file0.log)
> (See attached file: XFree86.0.log)

_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to