Hi folks,
The first line of xdm-log (attached) reported error about Xwrapper.config not found. Is this critical? X-windows seems to be running fine.
Cheers.
Yahoo! Mobile
- Send free SMS from your PC!
X: unable to open wrapper config file /etc/X11/Xwrapper.config This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 22 12:09:24 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Hewlett Packard D2807A"
(**) | |-->Device "Cirrus Logic 5434 PCI"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) |-->Input Device "Configured Mouse"
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:5:0) Cirrus Logic GD5434 rev 252, Mem @ 0xfd000000/24
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(--) Assigning device section with no busID to primary device
(--) Chipset CLGD5434-8 found
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(**) CIRRUS(0): Depth 8, (--) framebuffer bpp 8
(==) CIRRUS(0): Default visual is PseudoColor
(==) CIRRUS(0): Using SW cursor
(**) CIRRUS(0): Acceleration disabled
(--) CIRRUS(0): Linear framebuffer at 0xFD000000
(EE) CIRRUS(0): No valid MMIO address in PCI config space
(--) CIRRUS(0): Not Using MMIO
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(EE) CIRRUS(0): I2C initialization failed
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) CIRRUS(0): Memory Config reg 1 is 0x15
(--) CIRRUS(0): Memory Config reg 2 is 0x21
(--) CIRRUS(0): VideoRAM: 1024 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 85 MHz
(II) CIRRUS(0): Hewlett Packard D2807A: Using hsync range of 30.00-85.00 kHz
(II) CIRRUS(0): Hewlett Packard D2807A: Using vrefresh range of 50.00-100.00 Hz
(II) CIRRUS(0): Clock range: 12.00 to 85.50 MHz
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(--) CIRRUS(0): Virtual size is 800x600 (pitch 896)
(**) CIRRUS(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) CIRRUS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(++) CIRRUS(0): DPI set to (100, 100)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(==) CIRRUS(0): Silken mouse enabled
(**) CIRRUS(0): DPMS enabled
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "PS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
