On Sat, 5 Jul 2003, [iso-8859-1] Denes Kubicek wrote:
> Hello,
>
> I user redhat on my dell d800 with nvidia geforce 4
> and a wuxga wide screen supporting resolutions up to
> 1920x1200. I tried to modify the xfree86 file to get
> the resolution to work but it failed several times. Is
> it possible to get a proper file to copy it into
> etc/X11 from you without having to modify the existing
> Thanks in advance,
A modeline like the following should work:
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +Vsync
This was generated with the "gtf" application that ships with
XFree86 4.3.
Note that if you are using the "nv" driver that came with
XFree86, you need to be using XFree86 4.3. The "nv" driver
didn't support that chip before then.
Mark.
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
