I have a card with a Trio64V2 chip and 4MB RAM. I want to use a 1280x1024x16 resolution. The S3 driver, however, doesn't seem to like that resolution. The log messages are below. I tried this with the VESA driver, and that driver gives me the desired resolution, confirming that the card supports it. Again, logs are below. Question: How can I get the S3 driver to give me the 1280x1024 resolution? There doesn't seem to be a man page that describes the options for the S3 driver. I tried to use the "set_mclk" and set_refclk" options that the S3 Virge driver supports, but these options don't change anything.
-Joe
XFree86.0.log using S3 driver:
(II) s3(0): VESA BIOS detected
(II) s3(0): VESA VBE Version 2.0
(II) s3(0): VESA VBE Total Mem: 4096 kB
(II) s3(0): VESA VBE OEM: S3 Incorporated. 86C775/86C785
(II) s3(0): VESA VBE OEM Software Rev: 1.1
(II) s3(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) s3(0): VESA VBE OEM Product: Trio64V2/DX/GX
(II) s3(0): VESA VBE OEM Product Rev: Rev E
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "Trio32/64"
(--) s3(0): Framebuffer @ 0xe0000000
(--) s3(0): videoRam = 4096 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) s3(0): MCLK 66.222 Mhz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 80 Mhz
(II) s3(0): Monitor: Using hsync range of 31.50-82.00 kHz
(II) s3(0): Monitor: Using vrefresh range of 50.00-150.00 Hz
(II) s3(0): Clock range: 16.00 to 80.00 MHz
...
(II) s3(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
...
(II) s3(0): Not using mode "1280x1024" (no mode of this name)
(--) s3(0): Virtual size is 1024x768 (pitch 1024)
(**) s3(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) s3(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync
+vsyncXFree86.0.log using VESA driver: (II) VESA(0): Total Memory: 64 64KB banks (4096kB) (II) VESA(0): Monitor: Using hsync range of 31.50-82.00 kHz (II) VESA(0): Monitor: Using vrefresh range of 50.00-150.00 Hz (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) (**) VESA(0): *Built-in mode "1280x1024" (**) VESA(0): *Built-in mode "1024x768" (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (**) VESA(0): Built-in mode "1152x864" (**) VESA(0): Built-in mode "640x400" (--) VESA(0): Display dimensions: (360, 270) mm (--) VESA(0): DPI set to (90, 96) (**) VESA(0): Option "ShadowFB" "True" (II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (11a) (II) VESA(0): Attempting to use 85Hz refresh for mode "1024x768" (117) (II) VESA(0): Attempting to use 85Hz refresh for mode "800x600" (114) (II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (111) (II) VESA(0): Attempting to use 75Hz refresh for mode "1152x864" (163) (II) VESA(0): Attempting to use 85Hz refresh for mode "640x400" (11d)
_______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86

