XFree86 Bug/Test Report Form
Please fill in as many of the fields a possible, and return this form to
[EMAIL PROTECTED] Replace the comments in [] with your own text.
VERSION:
4.2.99.902
VIDEO DRIVER:
radeon
OPERATING SYSTEM:
Linux
VIDEO CARD:
MODEL:
Mentor Graphic Radeon VE GP8000T/32
GRAPHICS CHIPSET:
ATI Radeon VE QY
RAMDAC:
CLOCKCHIP:
VIDEO MEMORY:
32 MegaBytes SDRAM
BUS TYPE:
AGP
REPORT:
This card has 2 SVGA outputs and 1 SVIDEO output; the middle output
is Primary head for MS Windows drivers:
|
|____(....)____(....)____(..)___ AGP bus
SVGA2 SVGA1 SVIDEO
/|\
|
Primary
Head
SVGA output
(for MSWin)
For radeon kernel module or radeon X driver Primary head is other SVGA
output:
|
|____(....)____(....)____(..)___ AGP bus
SVGA2 SVGA1 SVIDEO
/|\
|
Primary
Head
SVGA output
(for Linux)
If I attach my Sampo AlphaScan 520 15" monitor, which is without DCC
support, to SVGA1 port and power on my computer, this card detects
the monitor and initialize output to this port. Again the same if I
attach monitor to SVGA2 port. When I boot with monitor attached to
SVGA1 port, X server refuses to start up and printout this:
.
.
.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon VE QY (AGP)" (ChipID = 0x5159)
(--) RADEON(0): Linear framebuffer at 0xd8000000
(--) RADEON(0): MMIO registers at 0xe1000000
(--) RADEON(0): VideoRAM: 32768 kByte (64-bit SDR SDRAM)
(II) RADEON(0): CloneDisplay option not set -- defaulting to auto-detect
(II) RADEON(0): Primary Display == Type 5
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=16700
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Clone modes validation ------------
(II) RADEON(0): DDC detection (type 3) for clone modes
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(WW) RADEON(0): Monitor0: Using default hsync range of 28.00-33.00kHz
(WW) RADEON(0): Monitor0: using default vrefresh range of 43.00-72.00Hz
.
.
.
(II) RADEON(0): Not using mode "1024x768" (no mode of this name)
(II) RADEON(0): Not using mode "800x600" (no mode of this name)
(--) RADEON(0): Virtual size is 640x480 (pitch 640)
(**) RADEON(0): *Mode "1024x768"
(**) RADEON(0): *Mode "800x600"
(**) RADEON(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync
-vsync
(II) RADEON(0): Valid Clone Mode: 640x480
(II) RADEON(0): Total of 1 clone modes found ------------
(II) RADEON(0): Validating modes on Primary head (DDCType: 4) ---------
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(WW) RADEON(0): Mode 1024x768 is out of range.
(WW) RADEON(0): Valid modes must be between 320x200-0x0
(WW) RADEON(0): Mode 800x600 is out of range.
(WW) RADEON(0): Valid modes must be between 320x200-0x0
(WW) RADEON(0): Mode 640x480 is out of range.
(WW) RADEON(0): Valid modes must be between 320x200-0x0
(II) RADEON(0): Total number of valid FP mode(s) found: 0
(EE) RADEON(0): No valid mode found for this DFP/LCD
(II) UnloadModule: "ati"
(II) UnloadModule: "i2c"
(II) Unloading /usr/X11R6/lib/modules/libi2c.a
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(II) UnloadModule: "radeon"
(II) Unloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
When I boot computer with monitor attached to SVGA2 port instead,
X server starts up with these messages:
.
.
.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon VE QY (AGP)" (ChipID = 0x5159)
(--) RADEON(0): Linear framebuffer at 0xd8000000
(--) RADEON(0): MMIO registers at 0xe1000000
(--) RADEON(0): VideoRAM: 32768 kByte (64-bit SDR SDRAM)
(II) RADEON(0): CloneDisplay option not set -- defaulting to auto-detect
(II) RADEON(0): Primary Display == Type 1
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.99.902, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=16700
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head (DDCType: 4) ---------
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): Monitor0: Using hsync range of 31.50-72.20 kHz
(II) RADEON(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) RADEON(0): Clock range: 12.00 to 350.00 MHz
.
.
.
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
+hsync +vsync
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync
+vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync
-vsync
.
.
.
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
Symbol fi1236_dump_status from module /usr/X11R6/lib/modules/drivers/radeon_drv.o is
unresolved!
.
.
.
I tried both NoDCC option in Monitor section and CrtScreen option
in Card section, with many others options including NoPanel,
CloneDisplay, DCCType and so, but none has corrected my problem!
Please Help or tell me what I must do to allow me boot up from
SVGA1 port.
Thanks,
Giuseppe
$XFree86: xc/programs/Xserver/hw/xfree86/doc/BugReport.cpp,v 1.1 2001/01/15 23:00:01
dawes Exp $
********************************************************
www.topdrin.com
Il meglio di loghi e suonerie al TOP
per il tuo cellulare.
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
