You are using the GLint driver for your ATi card which won't work very likely. Please note that if the ATi driver does not work there is no use trying a driver for chipsets from another vendor. In this case you may have to get the binary only FireGL driver from ATi.
Egbert. Michaell Taylor writes: > > > > > > > > > > I have a brand new dell 450 workstation with a ATI Fire GL 1 card and > > KDS Rad-9p monitor. > > > > I've put redhat 8.0 on the system fresh. The anaconda (installation) > > script recognized the monitor and assigned the card a generic Radeon > > driver. > > > > Installation went smoothly up to X configuration. I tried to "test" > > the various monitors at this stage - all gave a blank screen before > > kicking back to anaconda. Thought I would do a post install config. > > I've tried every monitor/card combo I can think of - going way down > > the resolution food chain in an attempt to get anything to appear. No > > dice. > > > > I put a old monitor on the system which I know runs X perfectly - nada. > > > > I went to ati site and grabbed some installation files, but apparently > > none work with the most recent XFree package. I am running > > XFree86-4.2.0-72. > > > > I've tried configuring for generic cards but still get a "no screens > > found" message. Any ideas? > > _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
