On Sun, Feb 09, 2003 at 12:04:38PM +1100, Paul Whittaker wrote:
>I am getting a segmentation fault in /usr/X11R6/bin/XFree86 (4.2.99.901
>Linux-ix86-glibc22 binary snapshot) when using "-xkbmap default" in
>conjunction with a /usr/X11R6/lib/X11/xkb/compiled/default.xkm file
>prepared using "xkbcomp -xkm :0" against a 4.2.99.901 display using the
>following keyboard InputDevice options:
>
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
>
>Host O/S is a custom Linux distribution (DIET-PC[.sourceforge.net])
>based on Linux 2.4.20. Host hardware are Pentium-I series units with
>onboard S3 Trio64 and Trio64-V2 chipsets. Problem occurs using s3
>(Trio64) and vesa (both) drivers (BTW, any chance of Trio64-V2 support
>in s3 driver any time soon?). The problem does not occur in XFree86
>4.2.1. The problem does not occur if "-xkbmap default" is omitted.
I've found the reason for the segfault, but with that fixed I get:
Cannot open "keymap/default" for reading
Error opening keymap file default, reverting to defaults
(I'll commit the segfault fix soon.)
David
--
David Dawes
Release Engineer/Architect The XFree86 Project
www.XFree86.org/~dawes
>The full command line is:
>
>/usr/X11R6/bin/XFree86 -quiet -xkbmap default -auth /.Xauthority -fp
>/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,tcp/fontserver:7100
>
>-query xdmserver dpms vt2 :0
>
>/var/log/XFree86.0.log is attached. The last few system calls before
>the SIGSEGV in strace output are:
>
>open("/usr/X11R6/lib/X11/xkb/compiled/default.xkm", O_RDONLY) = 7
>fstat64(7, {st_mode=S_IFREG|0644, st_size=8304, ...}) = 0
>old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
>-1, 0) = 0
>x40015000
>read(7, "\17mkx\26\10\377\7\177\0\0\0\6\0\1\0D\0D\0\4\0\1\0\0\5"...,
>4096) = 409
>6
>_llseek(7, 0, [0], SEEK_SET) = 0
>read(7, "\17mkx\26\10\377\7\177\0\0\0\6\0\1\0D\0D\0\4\0\1\0\0\5"...,
>4096) = 409
>6
>_llseek(7, 4096, [4096], SEEK_SET) = 0
>_llseek(7, 4096, [4096], SEEK_SET) = 0
>_llseek(7, 4096, [4096], SEEK_SET) = 0
>_llseek(7, 4096, [4096], SEEK_SET) = 0
>read(7, "\2\1\0\21\10\0CTRL+ALT\0\0\252\377\0\0\0\0\0\0\0\0\0\0"...,
>4096) = 409
>6
>_llseek(7, 8192, [8192], SEEK_SET) = 0
>_llseek(7, 8192, [8192], SEEK_SET) = 0
>read(7, "Label\0\0\0\3\6&\2\270\20\0\0\214\1d\0\0\0\0\0\v\0Scro"...,
>4096) = 112
>close(7) = 0
>munmap(0x40015000, 4096) = 0
>ioctl(5, 0x4b32, 0) = 0
>--- SIGSEGV (Segmentation fault) ---
>
>This is a pre-release version of XFree86, and is not supported in any
>way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
>to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
>please check the latest version in the XFree86 CVS repository
>(http://www.XFree86.Org/cvs).
>
>XFree86 Version 4.2.99.901 (4.3.0 RC 1)
>Release Date: 4 February 2003
>X Protocol Version 11, Revision 0, Release 6.6
>Build Operating System: Linux 2.4.7-10custom i686 [ELF]
>Build Date: 05 February 2003
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 9 12:00:52 2003
>(==) Using config file: "/etc/X11/XF86Config-4"
>(==) ServerLayout "DIET-PC X11 Server"
>(**) |-->Screen "Screen" (0)
>(**) | |-->Monitor "Monitor"
>(**) | |-->Device "Video Card"
>(**) |-->Input Device "Mouse"
>(**) |-->Input Device "Keyboard"
>(**) Option "Protocol" "Standard"
>(**) Option "AutoRepeat" "250 30"
>(==) Keyboard: CustomKeycode disabled
>(++) FontPath set to
>"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,tcp/fontserver:7100"
>(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
>(==) ModulePath set to "/usr/X11R6/lib/modules"
>(**) Option "AllowNonLocalXvidtune" "on"
>(**) Option "BlankTime" "5"
>(**) Option "StandbyTime" "10"
>(**) Option "SuspendTime" "20"
>(**) Option "OffTime" "40"
>(++) using VT number 2
>
>(II) Open APM successful
>(II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.2
> XFree86 Video Driver: 0.6
> XFree86 XInput driver : 0.4
> XFree86 Server Extension : 0.2
> XFree86 Font Renderer : 0.4
>(II) Loader running on linux
>(II) LoadModule: "bitmap"
>(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
>(II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
>(II) Loading font Bitmap
>(II) LoadModule: "pcidata"
>(II) Loading /usr/X11R6/lib/modules/libpcidata.a
>(II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
>(II) PCI: Probing config type using method 1
>(II) PCI: Config type is 1
>(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
>(II) PCI: PCI scan (all values are in hex)
>(II) PCI: 00:00:0: chip 1004,0005 card 0000,0000 rev 01 class 06,00,00 hdr 00
>(II) PCI: 00:01:0: chip 1004,0006 card 0000,0000 rev 01 class 06,01,00 hdr 00
>(II) PCI: 00:0f:0: chip 5333,8811 card 0000,0000 rev 00 class 03,00,00 hdr 00
>(II) PCI: 00:10:0: chip 1095,0640 card 0000,0000 rev 02 class 01,01,00 hdr 00
>(II) PCI: End of PCI scan
>(II) Host-to-PCI bridge:
>(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
>(II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>(II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>(II) PCI-to-ISA bridge:
>(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
>(--) PCI:*(0:15:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 0, Mem @ 0xfe000000/23
>(II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>(II) Active PCI resource ranges:
> [0] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
>(II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
>(II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>(II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
> [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>(II) LoadModule: "ddc"
>(II) Loading /usr/X11R6/lib/modules/libddc.a
>(II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
>(II) LoadModule: "dbe"
>(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
>(II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "extmod"
>(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
>(II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension FontCache
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "s3"
>(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
>(II) Module s3: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 0.3.5
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.6
>(II) LoadModule: "mouse"
>(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
>(II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.4
>(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
> Trio32/64, Aurora64V+
>(II) Primary Device is: PCI 00:0f:0
>(--) Assigning device section with no busID to primary device
>(--) Chipset Trio32/64 found
>(II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
> [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>(II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
> [6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [11] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [12] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Setting vga for screen 0.
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/X11R6/lib/modules/libvgahw.a
>(II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.6
>(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(**) s3(0): Depth 16, (--) framebuffer bpp 16
>(==) s3(0): RGB weight 565
>(==) s3(0): Default visual is TrueColor
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
>(II) Module int10: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
>(II) s3(0): Primary V_BIOS segment is: 0xc000
>(WW) System lacks support for changing MTRRs
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>(II) Loading /usr/X11R6/lib/modules/libvbe.a
>(II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.6
>(II) s3(0): VESA BIOS detected
>(II) s3(0): VESA VBE Version 1.2
>(II) s3(0): VESA VBE Total Mem: 1024 kB
>(II) s3(0): VESA VBE OEM: S3 Incorporated. Trio64
>(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
>(**) s3(0): Chipset: "Trio32/64"
>(--) s3(0): Framebuffer @ 0xfe000000
>(--) s3(0): videoRam = 1024 Kb
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Loading /usr/X11R6/lib/modules/libramdac.a
>(II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.6
>(--) s3(0): MCLK 59.957 Mhz
>(--) s3(0): RefClock: 16000
>(--) s3(0): Max pixel clock at this depth is 80 Mhz
>(II) s3(0): Monitor: Using hsync range of 31.50-48.00 kHz
>(II) s3(0): Monitor: Using vrefresh range of 60.00-85.00 Hz
>(II) s3(0): Clock range: 16.00 to 80.00 MHz
>(II) s3(0): Not using mode "1024x768" (insufficient memory for mode)
>(II) s3(0): Not using mode "1024x768" (insufficient memory for mode)
>(II) s3(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1152x864" (insufficient memory for mode)
>(II) s3(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
>(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
>(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
>(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
>(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
>(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
>(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
>(II) s3(0): Not using default mode "832x624" (hsync out of range)
>(II) s3(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1152x768" (insufficient memory for mode)
>(II) s3(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
>(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
>(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
>(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
>(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
>(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
>(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
>(II) s3(0): Not using mode "1024x768" (no mode of this name)
>(--) s3(0): Virtual size is 800x600 (pitch 800)
>(**) s3(0): *Mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
>(II) s3(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync
>+vsync
>(**) s3(0): *Mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
>(II) s3(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
>(**) s3(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
>(II) s3(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync
>+vsync
>(**) s3(0): Mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
>(II) s3(0): Modeline "640x480" 25.18 640 664 760 800 480 491 493 525
>(**) s3(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
>(II) s3(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
>(**) s3(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
>(II) s3(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
>(**) s3(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
>(II) s3(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
>(==) s3(0): DPI set to (75, 75)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/X11R6/lib/modules/libfb.a
>(II) Module fb: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.2
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/X11R6/lib/modules/libxaa.a
>(II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.2.99.901, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.6
>(II) do I need RAC? No, I don't.
>(II) resource ranges after preInit:
> [0] 0 0 0xfe000000 - 0xfe7fffff (0x800000) MS[B]
> [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [6] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
> [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [13] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
>(**) s3(0): Option "BackingStore"
>(**) s3(0): Backing store enabled
>(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 color pattern filled rectangles
> Solid Lines
>(II) s3(0): Acceleration enabled
>(II) s3(0): Using PIO
>(II) s3(0): Using SW cursor
>(**) Option "dpms"
>(**) s3(0): DPMS enabled
>(II) Setting vga for screen 0.
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension LBX
>(II) Initializing built-in extension XC-APPGROUP
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFree86-Bigfont
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(**) Option "Protocol" "PS/2"
>(**) Mouse: Protocol: "PS/2"
>(**) Option "CorePointer"
>(**) Mouse: Core Pointer
>(**) Option "Device" "/dev/misc/psaux"
>(**) Option "Buttons" "3"
>(**) Mouse: Emulate3Buttons, Emulate3Timeout: 50
>(**) Mouse: Buttons: 3
>(II) Keyboard "Keyboard" handled by legacy driver
>(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
>Couldn't load XKB keymap, falling back to pre-XKB keymap
>
> *** If unresolved symbols were reported above, they might not
> *** be the reason for the server aborting.
>
>Fatal server error:
>Caught signal 11. Server aborting
>
>
>When reporting a problem related to a server crash, please send
>the full server output, not just the last messages.
>This can be found in the log file "/var/log/XFree86.0.log".
>Please report problems to [EMAIL PROTECTED]
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
