John,
Thanks for the conversion tip. Using MS Word did not occur to me! I tried
everything else, e.g. file transfer with samba, etc.
>mv /etc/X11/XF86Config-4{,.backup-30012003}
This gives "No such file or directory". I checked on my newer machine
(also RH8, and works fine) and I didn't find a XF86Config-4 file.
Don
At 05:13 PM 1/30/03 +0000, you wrote:
>Hi,
>
>Well your config file says:
>
>(==) VGA(0): Virtual size is 320x200 (pitch 320)
>(**) VGA(0): Built-in mode "Generic 320x200 default mode": 12.6 MHz
>(scaled from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan)
>
>
>No wonder it all looks big :)
>
>Btw to convert from linux format to windows you can open the file in MSDOS
>Edit. (file->run-> "edit") Then save it, or copy and paste it. Also MS
>Word will convert iirc. :)
>
>Anyway, on with the story.. You need to setup some resolutions.
>
>Quickest way to do this is probably just to start from scratch.
>Do:
>
>mv /etc/X11/XF86Config-4{,.backup-30012003}
>redhat-config-xfree86
>
>Let me know how this works out.
>
>JohnFlux
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
