Hi! I assume you mean Mandrake :)
Anyhow, you can use the controls on your monitor to stretch the image to fill the screen. Or you can use xvidtune to get X to do it. Or you could try a different resolution. (Run the mandrake configuration center (mcc), go to hardware, and change the resolution there. Let me know what you try, and how it turns out. Best of luck, JohnFlux On Wed, Jan 29, 2003 at 01:22:56PM -0500, Rajendra Datar wrote: > Hello, > > I have a PC and I have loaded Mandrex 9.0 OS on it. > During the installation, it said it has found Nokia 477W monitor > (perfect) and the ATI card (ATI Utah was chosen by default by Linux). > So it was installed with 4.1.2 XFree86. > > When the system boots, it is fine and uses the entire screen. > After the file systems are mounted, the login GUI window only uses > part of the screen and about 1 inch vertical space is not used at all. > This space is on the right side. > > Can some Linux Guru help me on the configuration issue? > > THANKS a lot in advance. > > > > Raju Datar > > [EMAIL PROTECTED] > > > > _________________________________________________________________ > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 -- _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
