On 29/11/2018 15:32, Kirill A. Shutemov wrote:
> On Thu, Nov 29, 2018 at 02:24:47PM +0000, Kirill A. Shutemov wrote:
>> On Thu, Nov 29, 2018 at 01:35:17PM +0000, Juergen Gross wrote:
>>> On 29/11/2018 14:26, Kirill A. Shutemov wrote:
>>>> On Thu, Nov 29, 2018 at 09:41:25AM +0000, Juergen Gross wrote:
>>>>> On 29/11/2018 02:22, Hans van Kranenburg wrote:
>>>>>> Hi,
>>>>>>
>>>>>> As also seen at:
>>>>>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914951
>>>>>>
>>>>>> Attached there are two serial console output logs. One is starting with
>>>>>> Xen 4.11 (from debian unstable) as dom0, and the other one without Xen.
>>>>>>
>>>>>> [ 2.085543] BUG: unable to handle kernel paging request at
>>>>>> ffff888d9fffc000
>>>>>> [ 2.085610] PGD 200c067 P4D 200c067 PUD 0
>>>>>> [ 2.085674] Oops: 0000 [#1] SMP NOPTI
>>>>>> [ 2.085736] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>>>>>> 4.19.0-trunk-amd64 #1 Debian 4.19.5-1~exp1+pvh1
>>>>>> [ 2.085823] Hardware name: HP ProLiant DL360 G7, BIOS P68 05/21/2018
>>>>>> [ 2.085895] RIP: e030:ptdump_walk_pgd_level_core+0x1fd/0x490
>>>>>> [...]
>>>>>
>>>>> The offending stable commit is 4074ca7d8a1832921c865d250bbd08f3441b3657
>>>>> ("x86/mm: Move LDT remap out of KASLR region on 5-level paging"), this
>>>>> is commit d52888aa2753e3063a9d3a0c9f72f94aa9809c15 upstream.
>>>>>
>>>>> Current upstream kernel is booting fine under Xen, so in general the
>>>>> patch should be fine. Using an upstream kernel built from above commit
>>>>> (with the then needed Xen fixup patch 1457d8cf7664f34c4ba534) is fine,
>>>>> too.
>>>>>
>>>>> Kirill, are you aware of any prerequisite patch from 4.20 which could be
>>>>> missing in 4.19.5?
>>>>
>>>> I'm not.
>>>>
>>>> Let me look into this.
>>>>
>>>
>>> What is making me suspicious is the failure happening just after
>>> releasing the init memory. Maybe there is an access to .init.data
>>> segment or similar? The native kernel booting could be related to the
>>> usage of 2M mappings not being available in a PV-domain.
>>
>> Ahh.. Could you test this:
>>
>> diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
>> index a12afff146d1..7dec63ec7aab 100644
>> --- a/arch/x86/mm/dump_pagetables.c
>> +++ b/arch/x86/mm/dump_pagetables.c
>> @@ -496,7 +496,7 @@ static inline bool is_hypervisor_range(int idx)
>> * ffff800000000000 - ffff87ffffffffff is reserved for
>> * the hypervisor.
>> */
>> - return (idx >= pgd_index(__PAGE_OFFSET) - 16) &&
>> + return (idx >= pgd_index(__PAGE_OFFSET) - 17) &&
>> (idx < pgd_index(__PAGE_OFFSET));
>> #else
>> return false;
>
> Or, better, this:
That makes it boot again!
Any idea why upstream doesn't need it?
Juergen
>
> diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
> index a12afff146d1..8c04fadc4423 100644
> --- a/arch/x86/mm/dump_pagetables.c
> +++ b/arch/x86/mm/dump_pagetables.c
> @@ -496,8 +496,8 @@ static inline bool is_hypervisor_range(int idx)
> * ffff800000000000 - ffff87ffffffffff is reserved for
> * the hypervisor.
> */
> - return (idx >= pgd_index(__PAGE_OFFSET) - 16) &&
> - (idx < pgd_index(__PAGE_OFFSET));
> + return (idx >= pgd_index(LDT_BASE_ADDR) - 16) &&
> + (idx < pgd_index(LDT_BASE_ADDR));
> #else
> return false;
> #endif
> diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
> index 2c84c6ad8b50..b078a5b0ac91 100644
> --- a/arch/x86/xen/mmu_pv.c
> +++ b/arch/x86/xen/mmu_pv.c
> @@ -652,7 +652,7 @@ static int __xen_pgd_walk(struct mm_struct *mm, pgd_t
> *pgd,
> * will end up making a zero-sized hole and so is a no-op.
> */
> hole_low = pgd_index(USER_LIMIT);
> - hole_high = pgd_index(PAGE_OFFSET);
> + hole_high = pgd_index(LDT_BASE_ADDR);
>
> nr = pgd_index(limit) + 1;
> for (i = 0; i < nr; i++) {
>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
