Hi Ayan,
On 30/03/2025 19:03, Ayan Kumar Halder wrote:
Added a new file prepare_xen_region.inc to hold the common earlyboot MPU regions
configurations across arm64 and arm32.
While I understand the desire to consolidate the code, I am quite
unconvinced this should be done for assembly code. A few examples below why.
I would be interested to hear the view of the other Arm maintainers.
prepare_xen_region, enable_boot_cpu, fail_insufficient_regions() will be used by
both arm32 and arm64. Thus, they have been moved to prepare_xen_region.inc.
REGION_* are moved to arm64/sysregs.h. Introduced LOAD_SYSREG and STORE_SYSREG
to read/write to the system registers from the common asm file. One could not
reuse READ_SYSREG and WRITE_SYSREG as they have been defined to be invoked from
C files.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.hal...@amd.com>
---
Changes from
v1 -
1. enable_mpu() now sets HMAIR{0,1} registers. This is similar to what is
being done in enable_mmu(). All the mm related configurations happen in this
function.
2. Fixed some typos.
v2 -
1. Extracted the arm64 head.S functions/macros in a common file.
xen/arch/arm/arm64/mpu/head.S | 132 +-----------------
xen/arch/arm/include/asm/arm64/sysregs.h | 15 ++
.../include/asm/mpu/prepare_xen_region.inc | 128 +++++++++++++++++
3 files changed, 148 insertions(+), 127 deletions(-)
create mode 100644 xen/arch/arm/include/asm/mpu/prepare_xen_region.inc
diff --git a/xen/arch/arm/arm64/mpu/head.S b/xen/arch/arm/arm64/mpu/head.S
index 4d00de4869..90b4c8c18f 100644
--- a/xen/arch/arm/arm64/mpu/head.S
+++ b/xen/arch/arm/arm64/mpu/head.S
@@ -3,83 +3,7 @@
* Start-of-day code for an Armv8-R MPU system.
*/
-#include <asm/early_printk.h>
-#include <asm/mpu.h>
-
-/* Backgroud region enable/disable */
-#define SCTLR_ELx_BR BIT(17, UL)
-
-#define REGION_TEXT_PRBAR 0x38 /* SH=11 AP=10 XN=00 */
-#define REGION_RO_PRBAR 0x3A /* SH=11 AP=10 XN=10 */
-#define REGION_DATA_PRBAR 0x32 /* SH=11 AP=00 XN=10 */
-#define REGION_DEVICE_PRBAR 0x22 /* SH=10 AP=00 XN=10 */
-
-#define REGION_NORMAL_PRLAR 0x0f /* NS=0 ATTR=111 EN=1 */
-#define REGION_DEVICE_PRLAR 0x09 /* NS=0 ATTR=100 EN=1 */
-
-/*
- * Macro to prepare and set a EL2 MPU memory region.
- * We will also create an according MPU memory region entry, which
- * is a structure of pr_t, in table \prmap.
- *
- * sel: region selector
- * base: reg storing base address
- * limit: reg storing limit address
- * prbar: store computed PRBAR_EL2 value
- * prlar: store computed PRLAR_EL2 value
- * maxcount: maximum number of EL2 regions supported
- * attr_prbar: PRBAR_EL2-related memory attributes. If not specified it will
be
- * REGION_DATA_PRBAR
- * attr_prlar: PRLAR_EL2-related memory attributes. If not specified it will
be
- * REGION_NORMAL_PRLAR
- *
- * Preserves \maxcount
- * Output:
- * \sel: Next available region selector index.
- * Clobbers \base, \limit, \prbar, \prlar
- *
- * Note that all parameters using registers should be distinct.
- */
-.macro prepare_xen_region, sel, base, limit, prbar, prlar, maxcount,
attr_prbar=REGION_DATA_PRBAR, attr_prlar=REGION_NORMAL_PRLAR
- /* Check if the region is empty */
- cmp \base, \limit
- beq 1f
-
- /* Check if the number of regions exceeded the count specified in
MPUIR_EL2 */
- cmp \sel, \maxcount
- bge fail_insufficient_regions
-
- /* Prepare value for PRBAR_EL2 reg and preserve it in \prbar.*/
- and \base, \base, #MPU_REGION_MASK
- mov \prbar, #\attr_prbar
- orr \prbar, \prbar, \base
-
- /* Limit address should be inclusive */
- sub \limit, \limit, #1
- and \limit, \limit, #MPU_REGION_MASK
- mov \prlar, #\attr_prlar
- orr \prlar, \prlar, \limit
-
- msr PRSELR_EL2, \sel
- isb
- msr PRBAR_EL2, \prbar
- msr PRLAR_EL2, \prlar
- dsb sy
- isb
-
- add \sel, \sel, #1
-
-1:
-.endm
-
-/*
- * Failure caused due to insufficient MPU regions.
- */
-FUNC_LOCAL(fail_insufficient_regions)
- PRINT("- Selected MPU region is above the implemented number in MPUIR_EL2
-\r\n")
-1: wfe
- b 1b
-END(fail_insufficient_regions)
+#include <asm/mpu/prepare_xen_region.inc>
/*
* Enable EL2 MPU and data cache
@@ -108,62 +32,16 @@ END(enable_mpu)
* Maps the various sections of Xen (described in xen.lds.S) as different MPU
* regions.
*
- * Clobbers x0 - x5
+ * Clobbers x0 - x6
*
*/
FUNC(enable_boot_cpu_mm)
- /* Get the number of regions specified in MPUIR_EL2 */
- mrs x5, MPUIR_EL2
- and x5, x5, #NUM_MPU_REGIONS_MASK
-
- /* x0: region sel */
- mov x0, xzr
- /* Xen text section. */
- ldr x1, =_stext
- ldr x2, =_etext
- prepare_xen_region x0, x1, x2, x3, x4, x5, attr_prbar=REGION_TEXT_PRBAR
-
- /* Xen read-only data section. */
- ldr x1, =_srodata
- ldr x2, =_erodata
- prepare_xen_region x0, x1, x2, x3, x4, x5, attr_prbar=REGION_RO_PRBAR
-
- /* Xen read-only after init and data section. (RW data) */
- ldr x1, =__ro_after_init_start
- ldr x2, =__init_begin
- prepare_xen_region x0, x1, x2, x3, x4, x5
-
- /* Xen code section. */
- ldr x1, =__init_begin
- ldr x2, =__init_data_begin
- prepare_xen_region x0, x1, x2, x3, x4, x5, attr_prbar=REGION_TEXT_PRBAR
-
- /* Xen data and BSS section. */
- ldr x1, =__init_data_begin
- ldr x2, =__bss_end
- prepare_xen_region x0, x1, x2, x3, x4, x5
-
-#ifdef CONFIG_EARLY_PRINTK
- /* Xen early UART section. */
- ldr x1, =CONFIG_EARLY_UART_BASE_ADDRESS
- ldr x2, =(CONFIG_EARLY_UART_BASE_ADDRESS + CONFIG_EARLY_UART_SIZE)
- prepare_xen_region x0, x1, x2, x3, x4, x5, attr_prbar=REGION_DEVICE_PRBAR,
attr_prlar=REGION_DEVICE_PRLAR
-#endif
-
- b enable_mpu
+ mov x6, lr
Aside what I wrote above, why do we need to save/restore lr?
+ enable_boot_cpu x0, x1, x2, x3, x4, x5
+ mov lr, x6
ret
END(enable_boot_cpu_mm)
-/*
- * We don't yet support secondary CPUs bring-up. Implement a dummy helper to
- * please the common code.
- */
-ENTRY(enable_secondary_cpu_mm)
- PRINT("- SMP not enabled yet -\r\n")
-1: wfe
- b 1b
-ENDPROC(enable_secondary_cpu_mm)
-
/*
* Local variables:
* mode: ASM
diff --git a/xen/arch/arm/include/asm/arm64/sysregs.h
b/xen/arch/arm/include/asm/arm64/sysregs.h
index b593e4028b..9b833fe73b 100644
--- a/xen/arch/arm/include/asm/arm64/sysregs.h
+++ b/xen/arch/arm/include/asm/arm64/sysregs.h
@@ -462,6 +462,19 @@
#define ZCR_ELx_LEN_SIZE 9
#define ZCR_ELx_LEN_MASK 0x1ff
+#define REGION_TEXT_PRBAR 0x38 /* SH=11 AP=10 XN=00 */
+#define REGION_RO_PRBAR 0x3A /* SH=11 AP=10 XN=10 */
+#define REGION_DATA_PRBAR 0x32 /* SH=11 AP=00 XN=10 */
+#define REGION_DEVICE_PRBAR 0x22 /* SH=10 AP=00 XN=10 */
While those makes sense in sysreg.h because they are definition based on
the Arm Arm. The definition for ...
+
+#define REGION_NORMAL_PRLAR 0x0f /* NS=0 ATTR=111 EN=1 */
+#define REGION_DEVICE_PRLAR 0x09 /* NS=0 ATTR=100 EN=1 */
for PRLAR are specific to Xen. So I think they should be moved under
mpu/. I would also consider *_PRBAR ones.
Also, are those values truely arm64 specific? Asking because you are
using them in common code.
+
+#define STORE_SYSREG(v, name) "msr " __stringify(name,) #v;
+#define LOAD_SYSREG(v, name) "mrs " #v __stringify(,) #name;
+
+#ifndef __ASSEMBLY__
+
/* Access to system registers */
#define WRITE_SYSREG64(v, name) do { \
@@ -481,6 +494,8 @@
#define WRITE_SYSREG_LR(v, index) WRITE_SYSREG(v, ICH_LR_REG(index))
#define READ_SYSREG_LR(index) READ_SYSREG(ICH_LR_REG(index))
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_ARM_ARM64_SYSREGS_H */
/*
diff --git a/xen/arch/arm/include/asm/mpu/prepare_xen_region.inc
b/xen/arch/arm/include/asm/mpu/prepare_xen_region.inc
new file mode 100644
index 0000000000..3402ed23da
--- /dev/null
+++ b/xen/arch/arm/include/asm/mpu/prepare_xen_region.inc
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <asm/sysregs.h>
+#include <asm/mpu.h>
+
+/* Backgroud region enable/disable */
+#define SCTLR_ELx_BR BIT(17, UL)
+
+/*
+ * Macro to prepare and set a EL2 MPU memory region.
+ * We will also create an according MPU memory region entry, which
+ * is a structure of pr_t, in table \prmap.
+ *
+ * sel: region selector
+ * base: reg storing base address
+ * limit: reg storing limit address
+ * prbar: store computed PRBAR_EL2 value
+ * prlar: store computed PRLAR_EL2 value
+ * maxcount: maximum number of EL2 regions supported
+ * attr_prbar: PRBAR_EL2-related memory attributes. If not specified it will
be
+ * REGION_DATA_PRBAR
+ * attr_prlar: PRLAR_EL2-related memory attributes. If not specified it will
be
+ * REGION_NORMAL_PRLAR
+ *
+ * Preserves maxcount
+ * Output:
+ * sel: Next available region selector index.
+ * Clobbers base, limit, prbar, prlar
+ *
+ * Note that all parameters using registers should be distinct.
+ */
+.macro prepare_xen_region, sel, base, limit, prbar, prlar, maxcount,
attr_prbar=REGION_DATA_PRBAR, attr_prlar=REGION_NORMAL_PRLAR
+ /* Check if the region is empty */
+ cmp \base, \limit
+ beq 1f
+
+ /* Check if the number of regions exceeded the count specified in
MPUIR_EL2 */
+ cmp \sel, \maxcount
+ bge fail_insufficient_regions
+
+ /* Prepare value for PRBAR_EL2 reg and preserve it in \prbar.*/
+ and \base, \base, #MPU_REGION_MASK
+ mov \prbar, #\attr_prbar
+ orr \prbar, \prbar, \base
+
+ /* Limit address should be inclusive */
+ sub \limit, \limit, #1
+ and \limit, \limit, #MPU_REGION_MASK
+ mov \prlar, #\attr_prlar
+ orr \prlar, \prlar, \limit
+
+ STORE_SYSREG(\sel, PRSELR_EL2)
+ isb
+ STORE_SYSREG(\prbar, PRBAR_EL2)
+ STORE_SYSREG(\prlar, PRLAR_EL2)
+ dsb sy
+ isb
+
+ add \sel, \sel, #1
+
+1:
+.endm
+
> +.macro enable_boot_cpu, reg0, reg1, reg2, reg3, reg4, reg5
If we go this approach, this will need some documentation on top
(similar to the other macro in this file).
+ /* Get the number of regions specified in MPUIR_EL2 */
+ LOAD_SYSREG(\reg5, MPUIR_EL2)
+ and \reg5, \reg5, #NUM_MPU_REGIONS_MASK
+
+ /* reg0: region sel */
+ mov \reg0, #0
+ /* Xen text section. */
+ ldr \reg1, =_stext
For instance, on Arm32, this could be replaced with ``mov_w`` which is
doesn't involve memory load.
+ ldr \reg2, =_etext
+ prepare_xen_region \reg0, \reg1, \reg2, \reg3, \reg4, \reg5,
attr_prbar=REGION_TEXT_PRBAR
+
+ /* Xen read-only data section. */
+ ldr \reg1, =_srodata
+ ldr \reg2, =_erodata
+ prepare_xen_region \reg0, \reg1, \reg2, \reg3, \reg4, \reg5,
attr_prbar=REGION_RO_PRBAR
+
+ /* Xen read-only after init and data section. (RW data) */
+ ldr \reg1, =__ro_after_init_start
+ ldr \reg2, =__init_begin
+ prepare_xen_region \reg0, \reg1, \reg2, \reg3, \reg4, \reg5
+
+ /* Xen code section. */
+ ldr \reg1, =__init_begin
+ ldr \reg2, =__init_data_begin
+ prepare_xen_region \reg0, \reg1, \reg2, \reg3, \reg4, \reg5,
attr_prbar=REGION_TEXT_PRBAR
+
+ /* Xen data and BSS section. */
+ ldr \reg1, =__init_data_begin
+ ldr \reg2, =__bss_end
+ prepare_xen_region \reg0, \reg1, \reg2, \reg3, \reg4, \reg5
+
+#ifdef CONFIG_EARLY_PRINTK
+ /* Xen early UART section. */
+ ldr \reg1, =CONFIG_EARLY_UART_BASE_ADDRESS
+ ldr \reg2, =(CONFIG_EARLY_UART_BASE_ADDRESS + CONFIG_EARLY_UART_SIZE)
+ prepare_xen_region \reg0, \reg1, \reg2, \reg3, \reg4, \reg5,
attr_prbar=REGION_DEVICE_PRBAR, attr_prlar=REGION_DEVICE_PRLAR
+#endif
+
+ bl enable_mpu
+.endm
+
+/* Failure caused due to insufficient MPU regions. */
+FUNC_LOCAL(fail_insufficient_regions)
+ PRINT("- Selected MPU region is above the implemented number in MPUIR_EL2
-\r\n")
+1: wfe
+ b 1b
+END(fail_insufficient_regions)
+
+/*
+ * We don't yet support secondary CPUs bring-up. Implement a dummy helper to
+ * please the common code.
+ */
+ENTRY(enable_secondary_cpu_mm)
I really doubt we will be able to keep this function common in the future.
+ PRINT("- SMP not enabled yet -\r\n")
+1: wfe
+ b 1b
+ENDPROC(enable_secondary_cpu_mm)
+
+/*
+ * Local variables:
+ * mode: ASM
+ * indent-tabs-mode: nil
+ * End:
+ */
Cheers,
--
Julien Grall
