From: Volodymyr Babchuk <volodymyr_babc...@epam.com>
According to ATU documentation, bits [18:16] of accessed memory
address correspond to a function number. This is somewhat similar to
ECAM, but with huge holes between regions.
We can use this to minimize number of ATU re-programmings: configure
ATU to access BDF with F=0 and adjust memory address with function
number.
Taking into account the previous patch, that optimizes ATU
reprogramming by skipping call to __dw_pcie_prog_outbound_atu() if we
already configured pci_address, we can be sure that accesses to all
functions of one device will not trigger ATU reprogramming at all.
Signed-off-by: Volodymyr Babchuk <volodymyr_babc...@epam.com>
Signed-off-by: Mykyta Poturai <mykyta_potu...@epam.com>
---
xen/arch/arm/pci/pci-host-rcar4.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/xen/arch/arm/pci/pci-host-rcar4.c
b/xen/arch/arm/pci/pci-host-rcar4.c
index 3e3e073b09..5d006e4897 100644
--- a/xen/arch/arm/pci/pci-host-rcar4.c
+++ b/xen/arch/arm/pci/pci-host-rcar4.c
@@ -385,7 +385,7 @@ static void __iomem *rcar4_child_map_bus(struct
pci_host_bridge *bridge,
uint32_t busdev;
busdev = PCIE_ATU_BUS(sbdf.bus) | PCIE_ATU_DEV(PCI_SLOT(sbdf.devfn)) |
- PCIE_ATU_FUNC(PCI_FUNC(sbdf.devfn));
+ PCIE_ATU_FUNC(0);
/* FIXME: Parent is the root bus, so use PCIE_ATU_TYPE_CFG0. */
dw_pcie_prog_outbound_atu(bridge, PCIE_ATU_REGION_INDEX1,
@@ -393,7 +393,7 @@ static void __iomem *rcar4_child_map_bus(struct
pci_host_bridge *bridge,
bridge->child_cfg->phys_addr,
busdev, bridge->child_cfg->size);
- return bridge->child_cfg->win + where;
+ return bridge->child_cfg->win + ((uint32_t)sbdf.fn << 16) + where;
}
static int rcar4_child_config_read(struct pci_host_bridge *bridge,
--
2.34.1
