On 05.09.2024 12:41, Andrew Cooper wrote:
> On 05/09/2024 11:33 am, Jan Beulich wrote:
>> Hello,
>>
>> I happened to spot a ~14y old revert of the crucial hunk of the ~16y old
>> 551ceee97513 ("x86, hvm: stdvga cache always on") in our patch set,
>> supposedly to deal with text mode corruption when Linux is booted without
>> any "vga=" option, and when - after the GUI is up - the console is
>> switched back to one of the text mode ones.
>>
>> My immediate reaction was that we shouldn't be carrying such privately.
>> Yet after some playing with it I'm now at the point where I'm wondering
>> why we have that caching mode in the first place. It looks to hardly ever
>> come into use:
>> 1) As of 68e1183411be ("libxc: introduce a xc_dom_arch for hvm-3.0-x86_32
>> guests") caching mode is disabled from start-of-day, due the disabling
>> being unconditional in hvm/save.c:arch_hvm_load(). That can of course
>> be worked around, but then 2).
>> 2) In the course of setting up VGA, REP STOS (maybe REP MOVS) are
>> apparently used by both SeaBIOS and ROMBIOS, as can be derived from
>> stdvga_mem_accept() always hitting the "if ( p->dir == IOREQ_WRITE &&
>> p->count > 1 )" path while BIOS initializes.
>>
>> Further:
>> 3) 551ceee97513 ("x86, hvm: stdvga cache always on") bumped the maximum
>> range of "mapped" VRAM from 64k to 128k, yet without growing vram_page[].
>> Afaict in mode 0 (full 128k accessible at A0000-BFFFF) vram_get{b,l}()
>> now misbehave.
>> 4) d1b531631515 ("x86/hvm: unconditionally buffer writes to VRAM") likely
>> went too far (or not far enough) in bypassing write handling, yet then
>> still allowing reads to be serviced from possibly stale cache, when
>> ->stdvga goes first off and later back on, without ->cache changing
>> state.
>> 5) 22a1fbb575df ("x86/hvm: make sure stdvga cache cannot be re-enabled")
>> likely went too far. Surely there are cases (VRAM clearing at the very
>> least) after which VRAM state is known again, and hence caching could
>> in principle be re-enabled.
>>
>> Before I go and try to fix all of the above, I'd like to collect views
>> towards simply ripping out that caching mode, vastly simplifying the
>> source file in question.
>
> STDVGA caching is primarily (exclusively?) an optimisation for Windows XP.
>
> WinXP was written pre-virt, and wastes an awful lot of time rendering
> its boot animation with IN/OUT.
IN/OUT aren't accelerated at all; we merely intercept them to be able to
"snoop" values of OUTs. But I question that WinXP (or Win2K as Paul
suggested) did its actual rendering using IN/OUT, and this then having
been improved by the caching I'm talking about here (see below). IN/OUT
processing, as said, doesn't touch the MMIO cache at all.
> The "caching" (really, putting them in the bufioreq ring, rather than
> blocking for qemu on every access) made a good 10-20s improvement in VM
> boot performance if memory serves, not to mention dom0 load when booting
> multiple VMs in parallel.
Well, I'm talking about dropping caching, not the use of the bufioreq
ring. That is - we'd keep intercepting MMIO, merely directing writes the
bufioreq route, without any other internal processing / state recording.
Jan
