George Dunlap <dunl...@umich.edu> writes:
> Can you attach the following?
>
> * the output of `xl dmesg`
> * the output of `dmesg`
> * the config file for the guest
Attached.
> I just tested stubdoms with staging-4.10 and everything works
> correctly *as long as dom0 is assigned all memory*. If I limit the
> amount of dom0 memory to 1GiB, then stubdomains *doesn't* work with
> qdisk; only works with the defautl ("phy") backend.
Oh now that is interesting.
For what it's worth, I have seen this on both xen-4.10.0 and
stable-4.10. I have not tried staging-4.10.
-- Chris
Xen 4.10.0-1_prgmr.el6
(XEN) Xen version 4.10.0-1_prgmr.el6 (c...@centos.org) (gcc (GCC) 4.4.7
20120313 (Red Hat 4.4.7-18)) debug=n Wed Mar 7 17:18:35 PST 2018
(XEN) Latest ChangeSet: Wed Sep 13 17:16:31 2017 +0100 git:62bd6f0-dirty
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: cpuinfo loglvl=all guest_loglvl=error
dom0_mem=2560M,max:2560M com1=115200,8n1 console=com1 dom0_max_vcpus=2
dom0_vcpus_pin=true dom0_nodes=0 pv-linear-pt=true
(XEN) Xen image load base address: 0
(XEN) Video information:
(XEN) No VGA detected
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f0000000 (usable)
(XEN) 00000000fc000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000210000000 (usable)
(XEN) New Xen image base address: 0xefa00000
(XEN) ACPI: RSDP 000EA020, 0024 (r2 Xen)
(XEN) ACPI: XSDT FC00C750, 0054 (r1 Xen HVM 0 HVML 0)
(XEN) ACPI: FACP FC00C440, 00F4 (r4 Xen HVM 0 HVML 0)
(XEN) ACPI: DSDT FC003940, 8A7E (r2 Xen HVM 0 INTL 20090123)
(XEN) ACPI: FACS FC003900, 0040
(XEN) ACPI: APIC FC00C540, 00A0 (r2 Xen HVM 0 HVML 0)
(XEN) ACPI: HPET FC00C660, 0038 (r1 Xen HVM 0 HVML 0)
(XEN) ACPI: WAET FC00C6A0, 0028 (r1 Xen HVM 0 HVML 0)
(XEN) ACPI: SSDT FC00C6D0, 0031 (r2 Xen HVM 0 INTL 20090123)
(XEN) ACPI: SSDT FC00C710, 0031 (r2 Xen HVM 0 INTL 20090123)
(XEN) System RAM: 8191MB (8388216kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000210000000
(XEN) Domain heap initialised
(XEN) CPU Vendor: Intel, Family 6 (0x6), Model 62 (0x3e), Stepping 4 (raw
000306e4)
(XEN) found SMP MP-table at 000fb710
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0xb008 (32 bits)
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:b004,1:0], pm1x_evt[1:b000,1:0]
(XEN) ACPI: wakeup_vec[fc00390c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] enabled)
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ5 used by override.
(XEN) ACPI: IRQ10 used by override.
(XEN) ACPI: IRQ11 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 1504 MSI/MSI-X
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) Levelling caps: 0x1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) CPU0: Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Platform timer is 62.500MHz HPET
(XEN) Detected 2200.058 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d080410558 -> ffff82d080411c8c
(XEN) I/O virtualisation disabled
(XEN) CPU0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) nr_sockets: 1
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) TSC deadline timer enabled
(XEN) Allocated console ring of 64 KiB.
(XEN) mwait-idle: does not run on family 6 model 62
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Booting processor 1/2 eip 8e000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 2/4 eip 8e000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) CPU2: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 3/6 eip 8e000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) CPU3: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 4/8 eip 8e000
(XEN) Initializing CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 4
(XEN) CPU4: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 5/10 eip 8e000
(XEN) Initializing CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 5
(XEN) CPU5: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 6/12 eip 8e000
(XEN) Initializing CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 6
(XEN) CPU6: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 7/14 eip 8e000
(XEN) Initializing CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 7
(XEN) CPU7: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Brought up 8 CPUs
(XEN) build-id: ec7cace1e9215d3ed63fa87ff8c7804d9712e15b
(XEN) HPET: 0 timers usable for broadcast (3 total)
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) xenoprof: Initialization failed. Intel processor family 6 model 62 is not
supported
(XEN) Dom0 has maximum 432 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2497000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000200000000->0000000204000000 (634381 pages to be
allocated)
(XEN) Init. ramdisk: 000000020ee0d000->0000000210000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff82497000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008000500000
(XEN) Start info: ffffffff82497000->ffffffff824974b4
(XEN) Page tables: ffffffff82498000->ffffffff824af000
(XEN) Boot stack: ffffffff824af000->ffffffff824b0000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff81fa4180
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs
(XEN) .........done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Errors
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 444kB init memory
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:01.1
(XEN) PCI add device 0000:00:01.3
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:04.0
(XEN) PCI add device 0000:00:05.0
[ 0.000000] Linux version 4.9.58 (poisonivy@gotham-earth2) (gcc version
5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #6 SMP Wed Feb 7 19:06:24 UTC 2018
[ 0.000000] Command line: ro root=UUID=0cef071f-495f-445b-8bc2-aba8c13fe1b1
rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun64
KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM edd=off max_loop=768 swiotlb=32768
console=hvc0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000a0061fff] usable
[ 0.000000] Xen: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Xen HVM domU, BIOS 4.8.2-1_prgmr.el6 10/02/2017
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xa0062 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0246b000, 0x0246bfff] PGTABLE
[ 0.000000] BRK [0x0246c000, 0x0246cfff] PGTABLE
[ 0.000000] BRK [0x0246d000, 0x0246dfff] PGTABLE
[ 0.000000] BRK [0x0246e000, 0x0246efff] PGTABLE
[ 0.000000] BRK [0x0246f000, 0x0246ffff] PGTABLE
[ 0.000000] BRK [0x02470000, 0x02470fff] PGTABLE
[ 0.000000] BRK [0x02471000, 0x02471fff] PGTABLE
[ 0.000000] BRK [0x02472000, 0x02472fff] PGTABLE
[ 0.000000] BRK [0x02473000, 0x02473fff] PGTABLE
[ 0.000000] BRK [0x02474000, 0x02474fff] PGTABLE
[ 0.000000] BRK [0x02475000, 0x02475fff] PGTABLE
[ 0.000000] BRK [0x02476000, 0x02476fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x04000000-0x051f2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
[ 0.000000] ACPI: XSDT 0x00000000FC00C750 000054 (v01 Xen HVM
00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 0x00000000FC00C440 0000F4 (v04 Xen HVM
00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 0x00000000FC003940 008A7E (v02 Xen HVM
00000000 INTL 20090123)
[ 0.000000] ACPI: FACS 0x00000000FC003900 000040
[ 0.000000] ACPI: FACS 0x00000000FC003900 000040
[ 0.000000] ACPI: APIC 0x00000000FC00C540 0000A0 (v02 Xen HVM
00000000 HVML 00000000)
[ 0.000000] ACPI: HPET 0x00000000FC00C660 000038 (v01 Xen HVM
00000000 HVML 00000000)
[ 0.000000] ACPI: WAET 0x00000000FC00C6A0 000028 (v01 Xen HVM
00000000 HVML 00000000)
[ 0.000000] ACPI: SSDT 0x00000000FC00C6D0 000031 (v02 Xen HVM
00000000 INTL 20090123)
[ 0.000000] ACPI: SSDT 0x00000000FC00C710 000031 (v02 Xen HVM
00000000 INTL 20090123)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000a0061fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x9fafb000-0x9fb1cfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000a0061fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a0061fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000a0061fff]
[ 0.000000] On node 0 totalpages: 655359
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10178 pages used for memmap
[ 0.000000] DMA32 zone: 651362 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 600000
[ 0.000000] Remapped 98 page(s)
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xa0062000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.10.0-1_prgmr.el6 (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff88009c600000 s109528 r8192
d29736 u262144
[ 0.000000] pcpu-alloc: s109528 r8192 d29736 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 645096
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: ro
root=UUID=0cef071f-495f-445b-8bc2-aba8c13fe1b1 rd_NO_LUKS rd_NO_LVM
LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun64 KEYBOARDTYPE=pc
KEYTABLE=us rd_NO_DM edd=off max_loop=768 swiotlb=32768 console=hvc0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x98600000-0x9c600000] (64MB) mapped at
[ffff880098600000-ffff88009c5fffff]
[ 0.000000] Memory: 2461336K/2621436K available (8659K kernel code, 1565K
rwdata, 4060K rodata, 2420K init, 2544K bss, 160100K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:524544 nr_irqs:512 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [hvc0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles:
0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2199.983 MHz processor
[ 0.003000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4400.11 BogoMIPS (lpj=2200058)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.005069] ACPI: Core revision 20160831
[ 0.018542] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.020385] Security Framework initialized
[ 0.021015] Yama: becoming mindful.
[ 0.022034] SELinux: Initializing.
[ 0.023101] SELinux: Starting in permissive mode
[ 0.023758] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.025376] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.026587] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027032] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.028936] CPU: Physical Processor ID: 0
[ 0.029011] CPU: Processor Core ID: 0
[ 0.030019] mce: CPU supports 2 MCE banks
[ 0.031038] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.032013] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
[ 0.035013] Freeing SMP alternatives memory: 32K
[ 0.040806] ftrace: allocating 34088 entries in 134 pages
[ 0.050199] smpboot: Max logical packages: 1
[ 0.051022] VPMU disabled by hypervisor.
[ 0.052053] Performance Events: unsupported p6 CPU model 62 no PMU driver,
software events only.
[ 0.056526] installing Xen timer for CPU 1
[ 0.057559] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.058016] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.059102] x86: Booted up 1 node, 2 CPUs
[ 0.060437] devtmpfs: initialized
[ 0.066575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.075028] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.076220] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.077015] pinctrl core: initialized pinctrl subsystem
[ 0.078819] NET: Registered protocol family 16
[ 0.079053] xen:grant_table: Grant tables using version 1 layout
[ 0.080042] Grant table initialized
[ 0.083584] ACPI: bus type PCI registered
[ 0.084017] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086121] PCI: Using configuration type 1 for base access
[ 0.100261] ACPI: Added _OSI(Module Device)
[ 0.104029] ACPI: Added _OSI(Processor Device)
[ 0.106008] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109009] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.112308] xen: registering gsi 9 triggering 0 polarity 1
[ 0.119740] ACPI: Interpreter enabled
[ 0.122027] ACPI: (supports S0 S3 S5)
[ 0.124007] ACPI: Using IOAPIC for interrupt routing
[ 0.128092] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.144014] random: fast init done
[ 0.196521] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.197027] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.198032] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.199047] acpi PNP0A03:00: fail to add MMCONFIG information, can't access
extended PCI configuration space under this bridge.
[ 0.202418] acpiphp: Slot [0] registered
[ 0.203760] acpiphp: Slot [3] registered
[ 0.204305] acpiphp: Slot [4] registered
[ 0.205309] acpiphp: Slot [5] registered
[ 0.206321] acpiphp: Slot [6] registered
[ 0.207300] acpiphp: Slot [7] registered
[ 0.208285] acpiphp: Slot [8] registered
[ 0.209291] acpiphp: Slot [9] registered
[ 0.210284] acpiphp: Slot [10] registered
[ 0.211313] acpiphp: Slot [11] registered
[ 0.212303] acpiphp: Slot [12] registered
[ 0.213311] acpiphp: Slot [13] registered
[ 0.214304] acpiphp: Slot [14] registered
[ 0.215312] acpiphp: Slot [15] registered
[ 0.216282] acpiphp: Slot [16] registered
[ 0.217288] acpiphp: Slot [17] registered
[ 0.218300] acpiphp: Slot [18] registered
[ 0.219278] acpiphp: Slot [19] registered
[ 0.220311] acpiphp: Slot [20] registered
[ 0.221315] acpiphp: Slot [21] registered
[ 0.222308] acpiphp: Slot [22] registered
[ 0.223317] acpiphp: Slot [23] registered
[ 0.224289] acpiphp: Slot [24] registered
[ 0.225291] acpiphp: Slot [25] registered
[ 0.226294] acpiphp: Slot [26] registered
[ 0.227295] acpiphp: Slot [27] registered
[ 0.228306] acpiphp: Slot [28] registered
[ 0.229302] acpiphp: Slot [29] registered
[ 0.230319] acpiphp: Slot [30] registered
[ 0.231285] acpiphp: Slot [31] registered
[ 0.232267] PCI host bridge to bus 0000:00
[ 0.233016] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.234016] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.235016] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.236009] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff
window]
[ 0.237016] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238141] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.240158] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.243136] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.243991] pci 0000:00:01.1: reg 0x20: [io 0xc400-0xc40f]
[ 0.244366] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.245015] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.246013] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.247014] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.249171] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.249196] * Found PM-Timer Bug on the chipset. Due to workarounds for a
bug,
[ 0.249196] * this clock source is slow. Consider trying other clock sources
[ 0.250976] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 0.252244] pci 0000:00:02.0: [5853:0001] type 00 class 0xff8000
[ 0.252525] pci 0000:00:02.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.252692] pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
[ 0.255154] pci 0000:00:03.0: [10ec:8139] type 00 class 0x020000
[ 0.255397] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc1ff]
[ 0.255566] pci 0000:00:03.0: reg 0x14: [mem 0xf1000000-0xf10000ff]
[ 0.258135] pci 0000:00:04.0: [10ec:8139] type 00 class 0x020000
[ 0.258376] pci 0000:00:04.0: reg 0x10: [io 0xc200-0xc2ff]
[ 0.258535] pci 0000:00:04.0: reg 0x14: [mem 0xf1000100-0xf10001ff]
[ 0.261153] pci 0000:00:05.0: [10ec:8139] type 00 class 0x020000
[ 0.261392] pci 0000:00:05.0: reg 0x10: [io 0xc300-0xc3ff]
[ 0.261561] pci 0000:00:05.0: reg 0x14: [mem 0xf1000200-0xf10002ff]
[ 0.265148] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.267212] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.269106] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.271295] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.283096] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 2/0x4
ignored.
[ 0.284012] ACPI: Unable to map lapic to logical cpu number
[ 0.285144] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 3/0x6
ignored.
[ 0.286012] ACPI: Unable to map lapic to logical cpu number
[ 0.287136] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 4/0x8
ignored.
[ 0.288006] ACPI: Unable to map lapic to logical cpu number
[ 0.289130] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 5/0xa
ignored.
[ 0.290006] ACPI: Unable to map lapic to logical cpu number
[ 0.291123] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 6/0xc
ignored.
[ 0.292006] ACPI: Unable to map lapic to logical cpu number
[ 0.293122] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 7/0xe
ignored.
[ 0.294012] ACPI: Unable to map lapic to logical cpu number
[ 0.295429] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.296266] xen:balloon: Initialising balloon driver
[ 0.297156] xen_balloon: Initialising balloon driver
[ 0.298510] vgaarb: loaded
[ 0.300030] SCSI subsystem initialized
[ 0.301097] libata version 3.00 loaded.
[ 0.301225] ACPI: bus type USB registered
[ 0.302127] usbcore: registered new interface driver usbfs
[ 0.303083] usbcore: registered new interface driver hub
[ 0.304072] usbcore: registered new device driver usb
[ 0.305214] PCI: Using ACPI for IRQ routing
[ 0.306017] PCI: pci_cache_line_size set to 64 bytes
[ 0.306389] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.306392] e820: reserve RAM buffer [mem 0xa0062000-0xa3ffffff]
[ 0.306876] NetLabel: Initializing
[ 0.307015] NetLabel: domain hash size = 128
[ 0.308012] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.309083] NetLabel: unlabeled traffic allowed by default
[ 0.310138] clocksource: Switched to clocksource xen
[ 0.342718] VFS: Disk quotas dquot_6.6.0
[ 0.346478] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.353038] hugetlbfs: disabling because there are no supported hugepage
sizes
[ 0.358418] pnp: PnP ACPI init
[ 0.360917] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.367491] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367692] system 00:01: [io 0x08a0-0x08a3] has been reserved
[ 0.371943] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
[ 0.376091] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.379396] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379420] xen: registering gsi 8 triggering 1 polarity 0
[ 0.379529] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.379570] xen: registering gsi 12 triggering 1 polarity 0
[ 0.379676] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.379700] xen: registering gsi 1 triggering 1 polarity 0
[ 0.379795] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.379818] xen: registering gsi 6 triggering 1 polarity 0
[ 0.379838] pnp 00:05: [dma 2]
[ 0.379922] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.379956] xen: registering gsi 4 triggering 1 polarity 0
[ 0.379957] Already setup the GSI :4
[ 0.381876] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.381938] xen: registering gsi 7 triggering 1 polarity 0
[ 0.382069] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.382203] system 00:08: [io 0x10c0-0x1141] has been reserved
[ 0.385923] system 00:08: [io 0xb044-0xb047] has been reserved
[ 0.389831] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397994] pnp: PnP ACPI: found 9 devices
[ 0.431760] PM-Timer failed consistency check (0xffffff) - aborting.
[ 0.436438] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.436441] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.436443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.436445] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
[ 0.436833] NET: Registered protocol family 2
[ 0.440573] TCP established hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.445969] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.451306] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.455633] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.459106] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.462992] NET: Registered protocol family 1
[ 0.465630] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.469965] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.473905] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.477437] PCI: CLS 0 bytes, default 64
[ 0.477876] Trying to unpack rootfs image as initramfs...
[ 0.555092] Freeing initrd memory: 18380K
[ 0.563868] audit: initializing netlink subsys (disabled)
[ 0.570317] audit: type=2000 audit(1520871023.914:1): initialized
[ 0.578154] Initialise system trusted keyrings
[ 0.584121] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.589705] zbud: loaded
[ 0.592635] SELinux: Registering netfilter hooks
[ 1.013522] NET: Registered protocol family 38
[ 1.016102] Key type asymmetric registered
[ 1.019584] Asymmetric key parser 'x509' registered
[ 1.022554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 1.026943] io scheduler noop registered
[ 1.029170] io scheduler deadline registered
[ 1.031632] io scheduler cfq registered (default)
[ 1.035582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.039660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.044518] intel_idle: does not run on family 6 model 62
[ 1.044851] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.050219] ACPI: Power Button [PWRF]
[ 1.052899] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.056972] ACPI: Sleep Button [SLPF]
[ 1.059441] Warning: Processor Platform Limit not supported.
[ 1.059677] GHES: HEST is not enabled!
[ 1.063726] xen: registering gsi 24 triggering 0 polarity 1
[ 1.063786] xen: --> pirq=24 -> irq=24 (gsi=24)
[ 1.063952] xen-platform-pci 0000:00:02.0: Unable to set the evtchn callback
err=-22
[ 1.069741] xen-platform-pci: probe of 0000:00:02.0 failed with error -22
[ 1.075236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.081720] hpet_acpi_add: no address or irqs in _CRS
[ 1.085960] Non-volatile memory driver v1.3
[ 1.089000] Linux agpgart interface v0.103
[ 1.092680] [drm] Initialized
[ 1.106974] brd: module loaded
[ 1.567054] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1fb669c0eb1, max_idle_ns: 440795279361 ns
[ 1.757322] loop: module loaded
[ 1.760711] ata_piix 0000:00:01.1: version 2.13
[ 1.764167] scsi host0: ata_piix
[ 1.767300] scsi host1: ata_piix
[ 1.770906] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc400 irq 14
[ 1.778642] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc408 irq 15
[ 1.784817] libphy: Fixed MDIO Bus: probed
[ 1.787732] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.791657] ehci-pci: EHCI PCI platform driver
[ 1.794892] ehci-platform: EHCI generic platform driver
[ 1.799101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.803011] ohci-pci: OHCI PCI platform driver
[ 1.806520] ohci-platform: OHCI generic platform driver
[ 1.809639] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.813517] usbcore: registered new interface driver usbserial
[ 1.817723] usbcore: registered new interface driver usbserial_generic
[ 1.821578] usbserial: USB Serial support registered for generic
[ 1.825280] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.831698] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.834581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.838635] mousedev: PS/2 mouse device common for all mice
[ 1.842920] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.846826] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram
[ 1.851185] device-mapper: uevent: version 1.0.3
[ 1.855060] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:
dm-de...@redhat.com
[ 1.855746] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.867553] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.871957] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.876244] usbcore: registered new interface driver usbhid
[ 1.879810] usbhid: USB HID core driver
[ 1.882491] drop_monitor: Initializing network drop monitor service
[ 1.886398] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.889858] Initializing XFRM netlink socket
[ 1.892745] NET: Registered protocol family 10
[ 1.896235] mip6: Mobile IPv6
[ 1.898674] NET: Registered protocol family 17
[ 1.901677] mce: Unable to init device /dev/mcelog (rc: -16)
[ 1.905369] microcode: sig=0x306e4, pf=0x1, revision=0x428
[ 1.909594] microcode: Microcode Update Driver: v2.01
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.916271] AVX version of gcm_enc/dec engaged.
[ 1.919850] AES CTR mode by8 optimization enabled
[ 1.948019] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.954466] ata1.00: 73400320 sectors, multi 16: LBA48
[ 1.959218] ata1.01: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.964419] ata1.01: 2097152 sectors, multi 16: LBA48
[ 1.971611] ata1.00: configured for MWDMA2
[ 1.980014] ata1.01: configured for MWDMA2
[ 1.983283] registered taskstats version 1
[ 1.986749] Loading compiled-in X.509 certificates
[ 1.988278] ata2.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.988279] ata2.00: 104857600 sectors, multi 16: LBA48
[ 1.988283] ata2.01: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.988284] ata2.01: 8388608 sectors, multi 16: LBA48
[ 1.990546] ata2.00: configured for MWDMA2
[ 1.995848] ata2.01: configured for MWDMA2
[ 2.009291] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK .2
PQ: 0 ANSI: 5
[ 2.030842] zswap: loaded using pool lzo/zbud
[ 2.054634] sd 0:0:0:0: [sda] 73400320 512-byte logical blocks: (37.6
GB/35.0 GiB)
[ 2.061370] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.062716] sd 0:0:0:0: [sda] Write Protect is off
[ 2.062718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.062760] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.065601] sda: sda1 sda2
[ 2.066671] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.087726] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK .2
PQ: 0 ANSI: 5
[ 2.116390] Key type big_key registered
[ 2.142816] Key type encrypted registered
[ 2.147006] ima: No TPM chip found, activating TPM-bypass!
[ 2.152816] rtc_cmos 00:02: setting system clock to 2018-03-12 16:10:25 UTC
(1520871025)
[ 2.165000] sd 0:0:1:0: [sdb] 2097152 512-byte logical blocks: (1.07 GB/1.00
GiB)
[ 2.172421] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.172810] scsi 1:0:0:0: Direct-Access ATA QEMU HARDDISK .2
PQ: 0 ANSI: 5
[ 2.186443] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.190452] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.190508] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.199006] sdb:
[ 2.201146] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.215089] sd 1:0:0:0: [sdc] 104857600 512-byte logical blocks: (53.7
GB/50.0 GiB)
[ 2.223120] sd 1:0:0:0: [sdc] Write Protect is off
[ 2.223273] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.223651] scsi 1:0:1:0: Direct-Access ATA QEMU HARDDISK .2
PQ: 0 ANSI: 5
[ 2.244435] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.244500] sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.262733] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 2.268948] sdc: sdc1
[ 2.268979] sd 1:0:1:0: [sdd] 8388608 512-byte logical blocks: (4.29 GB/4.00
GiB)
[ 2.269174] sd 1:0:1:0: [sdd] Write Protect is off
[ 2.269179] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.269232] sd 1:0:1:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.300786] sdd: sdd1
[ 2.303168] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 2.303869] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 2.313328] Freeing unused kernel memory: 2420K
[ 2.318093] Write protecting the kernel read-only data: 14336k
[ 2.329258] Freeing unused kernel memory: 1564K
[ 2.334208] Freeing unused kernel memory: 36K
[ 2.348068] random: crng init done
[ 2.407671] dracut: dracut-004-409.el6_8.2
[ 2.443259] dracut: rd_NO_LUKS: removing cryptoluks activation
[ 2.457148] dracut: rd_NO_LVM: removing LVM activation
[ 2.498823] udev: starting version 147
[ 2.504256] udevd (961): /proc/961/oom_adj is deprecated, please use
/proc/961/oom_score_adj instead.
[ 2.575252] clocksource: Switched to clocksource tsc
[ 2.930285] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 3.056193] dracut: Starting plymouth daemon
[ 3.100942] dracut: rd_NO_DM: removing DM RAID activation
[ 3.123991] dracut: rd_NO_MD: removing MD RAID activation
[ 7.627294] EXT4-fs (sda1): mounting ext3 file system using the ext4
subsystem
[ 7.667595] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 7.755374] dracut: Mounted root filesystem /dev/sda1
[ 7.928902] dracut: Loading SELinux policy
[ 8.159548] audit: type=1404 audit(1520871031.505:2): enforcing=1
old_enforcing=0 auid=4294967295 ses=4294967295
[ 9.533697] SELinux: 65536 avtab hash slots, 309308 rules.
[ 9.658741] SELinux: 65536 avtab hash slots, 309308 rules.
[ 9.858193] SELinux: 9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024
cats
[ 9.858198] SELinux: 81 classes, 309308 rules
[ 9.869109] SELinux: Permission validate_trans in class security not
defined in policy.
[ 9.876379] SELinux: Permission module_load in class system not defined in
policy.
[ 9.883243] SELinux: Permission execmod in class dir not defined in policy.
[ 9.889512] SELinux: Permission execmod in class lnk_file not defined in
policy.
[ 9.895747] SELinux: Permission execmod in class blk_file not defined in
policy.
[ 9.902265] SELinux: Permission execmod in class sock_file not defined in
policy.
[ 9.908678] SELinux: Permission execmod in class fifo_file not defined in
policy.
[ 9.915007] SELinux: Class netlink_iscsi_socket not defined in policy.
[ 9.920431] SELinux: Class netlink_fib_lookup_socket not defined in policy.
[ 9.926317] SELinux: Class netlink_connector_socket not defined in policy.
[ 9.932058] SELinux: Class netlink_netfilter_socket not defined in policy.
[ 9.937821] SELinux: Class netlink_generic_socket not defined in policy.
[ 9.943445] SELinux: Class netlink_scsitransport_socket not defined in
policy.
[ 9.949462] SELinux: Class netlink_rdma_socket not defined in policy.
[ 9.954836] SELinux: Class netlink_crypto_socket not defined in policy.
[ 9.960400] SELinux: Permission syslog in class capability2 not defined in
policy.
[ 9.966554] SELinux: Permission wake_alarm in class capability2 not defined
in policy.
[ 9.973121] SELinux: Permission block_suspend in class capability2 not
defined in policy.
[ 9.980004] SELinux: Permission audit_read in class capability2 not defined
in policy.
[ 9.986462] SELinux: Permission attach_queue in class tun_socket not
defined in policy.
[ 9.993072] SELinux: Class binder not defined in policy.
[ 9.997441] SELinux: Class cap_userns not defined in policy.
[ 10.002181] SELinux: Class cap2_userns not defined in policy.
[ 10.006731] SELinux: the above unknown classes and permissions will be
allowed
[ 10.012627] SELinux: Completing initialization.
[ 10.012628] SELinux: Setting up existing superblocks.
[ 10.062918] audit: type=1403 audit(1520871033.408:3): policy loaded
auid=4294967295 ses=4294967295
[ 10.089097] dracut:
[ 11.119788] dracut: Switching root
[ 14.967320] udev: starting version 147
[ 15.762194] piix4_smbus 0000:00:01.3: SMBus base address uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 15.997451] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 16.010897] xen: registering gsi 28 triggering 0 polarity 1
[ 16.011052] xen: --> pirq=28 -> irq=28 (gsi=28)
[ 16.028948] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000c39000, <MAC
redacted>, IRQ 28
[ 16.050098] xen: registering gsi 32 triggering 0 polarity 1
[ 16.050177] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 16.066293] 8139cp 0000:00:04.0 eth1: RTL-8139C+ at 0xffffc90000c41100, <MAC
redacted>, IRQ 32
[ 16.081314] xen: registering gsi 36 triggering 0 polarity 1
[ 16.081391] xen: --> pirq=36 -> irq=36 (gsi=36)
[ 16.105505] 8139cp 0000:00:05.0 eth2: RTL-8139C+ at 0xffffc90000c51200, <MAC
redacted>, IRQ 36
[ 16.225809] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 16.688440] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 18.441863] FUJITSU Extended Socket Network Device Driver - version 1.1 -
Copyright (c) 2015 FUJITSU LIMITED
[ 18.635762] parport_pc 00:07: reported by Plug and Play ACPI
[ 18.640496] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.743346] parport_pc parport_pc.956: Unable to set coherent dma mask:
disabling DMA
[ 18.749960] parport_pc parport_pc.888: Unable to set coherent dma mask:
disabling DMA
[ 18.756332] parport_pc parport_pc.632: Unable to set coherent dma mask:
disabling DMA
[ 22.733190] ppdev: user-space parallel port driver
[ 23.935913] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 23.990688] Bridge firewalling registered
[ 24.363450] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 24.368316] drbd: srcversion: 0904DF2CCF7283ACE07D07A
[ 24.372082] drbd: registered as block device major 147
[ 24.426811] Ebtables v2.0 registered
[ 24.871749] fuse init (API version 7.26)
[ 24.969317] pps_core: LinuxPPS API ver. 1 registered
[ 24.976804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 25.040235] PTP clock support registered
[ 25.333504] md: raid10 personality registered for level 10
[ 25.464028] raid6: sse2x1 gen() 2972 MB/s
[ 25.484024] raid6: sse2x1 xor() 4708 MB/s
[ 25.504024] raid6: sse2x2 gen() 5882 MB/s
[ 25.524027] raid6: sse2x2 xor() 5244 MB/s
[ 25.543020] raid6: sse2x4 gen() 8351 MB/s
[ 25.563021] raid6: sse2x4 xor() 6347 MB/s
[ 25.566486] raid6: using algorithm sse2x4 gen() 8351 MB/s
[ 25.570846] raid6: .... xor() 6347 MB/s, rmw enabled
[ 25.574794] raid6: using ssse3x2 recovery algorithm
[ 25.618504] async_tx: api initialized (async)
[ 25.707777] xor: automatically using best checksumming function avx
[ 25.760155] md: raid6 personality registered for level 6
[ 25.767541] md: raid5 personality registered for level 5
[ 25.774704] md: raid4 personality registered for level 4
[ 25.925387] tun: Universal TUN/TAP device driver, 1.6
[ 25.931889] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 26.095503] xen:xen_evtchn: Event-channel device installed
[ 26.447826] blktap_device_init: blktap device major 252
[ 26.454670] blktap_ring_init: blktap ring major: 242
[ 26.558641] xen_pciback: backend is vpci
[ 29.852900] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 30.814741] EXT4-fs (dm-3): warning: maximal mount count reached, running
e2fsck is recommended
[ 30.878069] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 30.902582] EXT4-fs (dm-6): warning: maximal mount count reached, running
e2fsck is recommended
[ 30.926168] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts:
(null)
[ 34.644952] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 35.095813] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 36.676471] 8139cp 0000:00:03.0 eth0: link up, 100Mbps, full-duplex, lpa
0x05E1
[ 36.692702] xenbr0: port 1(eth0) entered blocking state
[ 36.697035] xenbr0: port 1(eth0) entered disabled state
[ 36.701596] device eth0 entered promiscuous mode
[ 36.826618] 8139cp 0000:00:04.0 eth1: link up, 100Mbps, full-duplex, lpa
0x05E1
[ 36.835350] xenbr1: port 1(eth1) entered blocking state
[ 36.840708] xenbr1: port 1(eth1) entered disabled state
[ 36.845829] device eth1 entered promiscuous mode
[ 37.033156] 8139cp 0000:00:05.0 eth2: link up, 100Mbps, full-duplex, lpa
0x05E1
[ 41.495752] audit: type=1400 audit(1520871064.841:4): avc: denied { create
} for pid=5181 comm="brctl" name="forward_delay"
scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0
tclass=file permissive=0
[ 41.528965] audit: type=1400 audit(1520871064.874:5): avc: denied { create
} for pid=5182 comm="brctl" name="stp_state"
scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0
tclass=file permissive=0
[ 41.556762] xenbr0: port 1(eth0) entered blocking state
[ 41.561184] xenbr0: port 1(eth0) entered forwarding state
[ 41.876575] audit: type=1400 audit(1520871065.222:6): avc: denied { create
} for pid=5227 comm="brctl" name="forward_delay"
scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0
tclass=file permissive=0
[ 41.907846] audit: type=1400 audit(1520871065.253:7): avc: denied { create
} for pid=5228 comm="brctl" name="stp_state"
scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0
tclass=file permissive=0
[ 42.008284] xenbr1: port 1(eth1) entered blocking state
[ 42.015465] xenbr1: port 1(eth1) entered forwarding state
[ 46.966276] audit: type=1305 audit(1520871070.312:8): audit_pid=5301 old=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 199.244630] vif vif-2-0 myvif-emu: renamed from vif2.0
[ 199.320610] xenbr0: port 2(myvif-emu) entered blocking state
[ 199.323883] xenbr0: port 2(myvif-emu) entered disabled state
[ 199.327432] device myvif-emu entered promiscuous mode
[ 199.335814] IPv6: ADDRCONF(NETDEV_UP): myvif-emu: link is not ready
[ 199.857838] vif vif-2-0 myvif-emu: Guest Rx ready
[ 199.864316] IPv6: ADDRCONF(NETDEV_CHANGE): myvif-emu: link becomes ready
[ 199.872692] xenbr0: port 2(myvif-emu) entered blocking state
[ 199.880167] xenbr0: port 2(myvif-emu) entered forwarding state
[ 199.900497] xen-blkback: backend/vbd/2/768: using 1 queues, protocol 1
(x86_64-abi)
[ 229.998517] xenbr0: port 2(myvif-emu) entered disabled state
[ 230.016369] xenbr0: port 2(myvif-emu) entered disabled state
[ 230.022710] device myvif-emu left promiscuous mode
[ 230.028113] xenbr0: port 2(myvif-emu) entered disabled state
type = 'hvm'
memory = 256
vcpus = 1
cpus = 'all,^0-0'
cpu_weight=256
name = 'myguest'
pae = 1
nx = 1
acpi = 1
viridian = 0
xen_platform_pci = 1
apic = 1
device_model_stubdomain_override = 1
boot = 'c'
sdl = 0
usb = 0
vnc = 0
nographic = 1
vga = "none"
vncpasswd = ''
serial = 'pty'
vif = ['vifname=myvif, mac=redacted, model=e1000, type=ioemu, ip=redacted,
bridge=xenbr0']
disk = ['phy:/var/lib/ganeti/instance-disks/myguest:0,hda,w']
on_poweroff = 'destroy'
on_reboot = 'destroy'
on_crash = 'destroy'
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
