Hi,
On 01/30/2018 05:50 PM, Zhongze Liu wrote:
Add libxl__sshm_add to map shared pages from one DomU to another, The mapping
process involves the follwing steps:
s/follwing/following/
* Set defaults and check for further errors in the static_shm configs:
overlapping areas, invalid ranges, duplicated master domain,
not page aligned, no master domain etc.
* Use xc_domain_add_to_physmap_batch to do the page sharing.
* When some of the pages can't be successfully mapped, roll back any
successfully mapped pages so that the system stays in a consistent state.
* Write infomation about static shared memory areas into the appropriate
s/infomation/information/
xenstore paths and set the refcount of the shared region accordingly.
Temporarily mark this as unsupported on x86 because calling p2m_add_foreign on
two domU's is currently not allowd on x86 (see the comments in
x86/mm/p2m.c:p2m_add_foreign for more details).
This is for the proposal "Allow setting up shared memory areas between VMs
from xl config file" (see [1]).
[1] https://lists.xen.org/archives/html/xen-devel/2017-08/msg03242.html
Signed-off-by: Zhongze Liu <blacksk...@gmail.com>
Cc: Wei Liu <wei.l...@citrix.com>
Cc: Ian Jackson <ian.jack...@eu.citrix.com>
Cc: Stefano Stabellini <sstabell...@kernel.org>
Cc: Julien Grall <julien.gr...@arm.com>
Cc: xen-de...@lists.xen.org
---
V3:
* Unmap the successfully mapped pages whenever rc != 0.
V4:
* Use XENMAPSPACE_gmfn_share instead of *_gmfn_foreign.
---
tools/libxl/Makefile | 2 +-
tools/libxl/libxl_arch.h | 6 +
tools/libxl/libxl_arm.c | 15 ++
tools/libxl/libxl_create.c | 27 +++
tools/libxl/libxl_internal.h | 14 ++
tools/libxl/libxl_sshm.c | 397 +++++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_x86.c | 19 +++
7 files changed, 479 insertions(+), 1 deletion(-)
create mode 100644 tools/libxl/libxl_sshm.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 917ceb0e72..e2834d84dc 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -139,7 +139,7 @@ LIBXL_OBJS = flexarray.o libxl.o libxl_create.o libxl_dm.o
libxl_pci.o \
libxl_dom_suspend.o libxl_dom_save.o libxl_usb.o \
libxl_vtpm.o libxl_nic.o libxl_disk.o libxl_console.o \
libxl_cpupool.o libxl_mem.o libxl_sched.o libxl_tmem.o \
- libxl_9pfs.o libxl_domain.o libxl_vdispl.o \
+ libxl_9pfs.o libxl_domain.o libxl_vdispl.o libxl_sshm.o
\
$(LIBXL_OBJS-y)
LIBXL_OBJS += libxl_genid.o
LIBXL_OBJS += _libxl_types.o libxl_flask.o _libxl_types_internal.o
diff --git a/tools/libxl/libxl_arch.h b/tools/libxl/libxl_arch.h
index 784ec7f609..11433fe466 100644
--- a/tools/libxl/libxl_arch.h
+++ b/tools/libxl/libxl_arch.h
@@ -78,6 +78,12 @@ int libxl__arch_extra_memory(libxl__gc *gc,
const libxl_domain_build_info *info,
uint64_t *out);
+_hidden
+bool libxl__arch_domain_support_sshm(const libxl_domain_build_info *b_info);
+
+_hidden
+int libxl__arch_domain_sshm_cachepolicy_setdefault(libxl_static_shm *sshm);
+
#if defined(__i386__) || defined(__x86_64__)
#define LAPIC_BASE_ADDRESS 0xfee00000
diff --git a/tools/libxl/libxl_arm.c b/tools/libxl/libxl_arm.c
index 3e46554301..e14879ec08 100644
--- a/tools/libxl/libxl_arm.c
+++ b/tools/libxl/libxl_arm.c
@@ -1154,6 +1154,21 @@ void libxl__arch_domain_build_info_acpi_setdefault(
libxl_defbool_setdefault(&b_info->acpi, false);
}
+bool libxl__arch_domain_support_sshm(const libxl_domain_build_info *b_info)
+{
+ return true;
+}
+
+int libxl__arch_domain_sshm_cachepolicy_setdefault(libxl_static_shm *sshm)
+{
+ if (sshm->cache_policy == LIBXL_SSHM_CACHEPOLICY_UNKNOWN)
+ sshm->cache_policy = LIBXL_SSHM_CACHEPOLICY_ARM_NORMAL;
+ if (sshm->cache_policy >= LIBXL_SSHM_CACHEPOLICY_X86_NORMAL)
+ return ERROR_INVAL;
+
+ return 0;
+}
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index c498135246..98c16867bf 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -532,6 +532,14 @@ int libxl__domain_build(libxl__gc *gc,
ret = ERROR_INVAL;
goto out;
}
+
+ /* the p2m has been setup, we could map the static shared memory now. */
s/the/The/
+ ret = libxl__sshm_add(gc, domid, d_config->sshms, d_config->num_sshms);
+ if (ret != 0) {
+ LOG(ERROR, "failed to map static shared memory");
+ goto out;
+ }
+
ret = libxl__build_post(gc, domid, info, state, vments, localents);
out:
return ret;
@@ -957,6 +965,25 @@ static void initiate_domain_create(libxl__egc *egc,
goto error_out;
}
+ if (d_config->num_sshms != 0 &&
+ !libxl__arch_domain_support_sshm(&d_config->b_info)) {
+ LOGD(ERROR, domid, "static_shm is not supported by this domain type.");
+ ret = ERROR_INVAL;
+ goto error_out;
+ }
+
+ for (i = 0; i < d_config->num_sshms; ++i) {
+ ret = libxl__sshm_setdefault(gc, domid, &d_config->sshms[i]);
+ if (ret) {
+ LOGD(ERROR, domid, "Unable to set defaults for static shm");
+ goto error_out;
+ }
+ }
+
+ ret = libxl__sshm_check_overlap(gc, domid,
+ d_config->sshms, d_config->num_sshms);
+ if (ret) goto error_out;
+
ret = libxl__domain_make(gc, d_config, &domid, &state->config);
if (ret) {
LOGD(ERROR, domid, "cannot make domain: %d", ret);
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 506687fbe9..2cfe4c08a7 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -4415,6 +4415,20 @@ static inline bool libxl__string_is_default(char **s)
}
#endif
+/*
+ * Set up static shared ram pages for HVM domains to communicate
+ *
+ * This function should only be called after the memory map is constructed
+ * and before any further memory access.
+ */
+_hidden int libxl__sshm_add(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshm, int len);
+
+_hidden int libxl__sshm_check_overlap(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshms, int len);
+_hidden int libxl__sshm_setdefault(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshm);
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_sshm.c b/tools/libxl/libxl_sshm.c
new file mode 100644
index 0000000000..562f46f299
--- /dev/null
+++ b/tools/libxl/libxl_sshm.c
@@ -0,0 +1,397 @@
+#include "libxl_osdeps.h"
+#include "libxl_internal.h"
+#include "libxl_arch.h"
+
+#define SSHM_PATH(id) GCSPRINTF("/libxl/static_shm/%s", id)
+
+#define SSHM_ERROR(domid, sshmid, f, ...) \
+ LOGD(ERROR, domid, "static_shm id = %s: " f, sshmid, ##__VA_ARGS__)
+
+
+/* Set default values for libxl_static_shm */
+int libxl__sshm_setdefault(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshm)
+{
+ int rc;
+
+ if (sshm->role == LIBXL_SSHM_ROLE_UNKNOWN)
+ sshm->role = LIBXL_SSHM_ROLE_SLAVE;
+ if (sshm->prot == LIBXL_SSHM_PROT_UNKNOWN)
+ sshm->prot = LIBXL_SSHM_PROT_RW;
What is the purpose of {ROLE,PROT}_UNKNOWN if you default it resp. to
ROLE_SLAVE and PROT_RW. Would not it be easier to just drop them?
+
+ /* role-specific checks */
+ if (sshm->role == LIBXL_SSHM_ROLE_SLAVE) {
+ if (sshm->offset == LIBXL_SSHM_RANGE_UNKNOWN)
+ sshm->offset = 0;
+ if (sshm->cache_policy != LIBXL_SSHM_CACHEPOLICY_UNKNOWN) {
+ SSHM_ERROR(domid, sshm->id,
+ "cache_policy is only applicable to master domains");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+ } else {
+ if (sshm->offset != LIBXL_SSHM_RANGE_UNKNOWN) {
+ SSHM_ERROR(domid, sshm->id,
+ "offset is only applicable to slave domains");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ rc = libxl__arch_domain_sshm_cachepolicy_setdefault(sshm);
+ if (rc) {
+ SSHM_ERROR(domid, sshm->id,
+ "cache policy not supported on this platform");
+ goto out;
+ }
+ }
+
+ rc = 0;
+out:
+ return rc;
+}
+
+/* Comparator for sorting sshm ranges by sshm->begin */
+static int sshm_range_cmp(const void *a, const void *b)
+{
+ libxl_static_shm *const *sshma = a, *const *sshmb = b;
+ return (*sshma)->begin > (*sshmb)->begin ? 1 : -1;
+}
+
+/* check if the sshm slave configs in @sshm overlap */
s/check/Check/
+int libxl__sshm_check_overlap(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshms, int len)
+{
+
+ const libxl_static_shm **slave_sshms = NULL;
+ int num_slaves;
+ int i;
+
+ if (!len) return 0;
+
+ slave_sshms = libxl__calloc(gc, len, sizeof(slave_sshms[0]));
+ num_slaves = 0;
+ for (i = 0; i < len; ++i) {
+ if (sshms[i].role == LIBXL_SSHM_ROLE_SLAVE)
+ slave_sshms[num_slaves++] = sshms + i;
+ }
+ qsort(slave_sshms, num_slaves, sizeof(slave_sshms[0]), sshm_range_cmp);
+
+ for (i = 0; i < num_slaves - 1; ++i) {
+ if (slave_sshms[i+1]->begin < slave_sshms[i]->end) {
+ SSHM_ERROR(domid, slave_sshms[i+1]->id, "slave ranges overlap.");
+ return ERROR_INVAL;
+ }
+ }
+
+ return 0;
+}
+
+/* libxl__sshm_do_map -- map pages into slave's physmap
+ *
+ * This functions maps
+ * master gfn: [@msshm->begin + @sshm->offset, @msshm->end + @sshm->offset)
+ * into
+ * slave gfn: [@sshm->begin, @sshm->end)
+ *
+ * The gfns of the pages that are successfully mapped will be stored
+ * in @mapped, and the number of the gfns will be stored in @nmapped.
+ *
+ * The caller have to guarentee that sshm->begin < sshm->end and all the
s/have to/has to/ I think.
s/guarentee/guarantee/
+ * values are page-aligned.
Hmmm, I don't see the alignement check in libxl. So do you rely on the
toolstack to do it?
+ */
+static int libxl__sshm_do_map(libxl__gc *gc, uint32_t mid, uint32_t sid,
+ libxl_static_shm *sshm, libxl_static_shm *msshm,
+ xen_pfn_t *mapped, unsigned int *nmapped)
+{
+ int rc;
+ int i;
+ unsigned int num_mpages, num_spages, num_success, offset;
A frame number may not fit into a 32-bit value. You would need to use
xen_pfn_t (64-bit) here.
+ int *errs;
+ xen_ulong_t *idxs;
+ xen_pfn_t *gpfns;
+
+ num_mpages = (msshm->end - msshm->begin) >> XC_PAGE_SHIFT;
+ num_spages = (sshm->end - sshm->begin) >> XC_PAGE_SHIFT;
+ offset = sshm->offset >> XC_PAGE_SHIFT;
+
+ /* Check range. Test offset < mpages first to avoid overflow */
+ if ((offset >= num_mpages) || (num_mpages - offset < num_spages)) {
+ SSHM_ERROR(sid, sshm->id, "exceeds master's address space.");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ /* fill out the pfn's and do the mapping */
I think you mean gfn here and not pfn.
+ errs = libxl__calloc(gc, num_spages, sizeof(int));
+ idxs = libxl__calloc(gc, num_spages, sizeof(xen_ulong_t));
+ gpfns = libxl__calloc(gc, num_spages, sizeof(xen_pfn_t));
+ for (i = 0; i < num_spages; i++) {
+ idxs[i] = (msshm->begin >> XC_PAGE_SHIFT) + offset + i;
+ gpfns[i]= (sshm->begin >> XC_PAGE_SHIFT) + i;
+ }
+ rc = xc_domain_add_to_physmap_batch(CTX->xch,
+ sid, mid,
+ XENMAPSPACE_gmfn_share,
+ num_spages,
+ idxs, gpfns, errs);
+
+ num_success = 0;
+ for (i = 0; i < num_spages; i++) {
+ if (errs[i]) {
+ SSHM_ERROR(sid, sshm->id,
+ "can't map at address 0x%"PRIx64".",
+ gpfns[i] << XC_PAGE_SHIFT);
+ rc = ERROR_FAIL;
+ } else {
+ mapped[num_success++] = gpfns[i];
+ }
+ }
+ *nmapped = num_success;
+ if (rc) goto out;
+
+ rc = 0;
+out:
+ return rc;
+}
+
+static int libxl__sshm_incref(libxl__gc *gc, xs_transaction_t xt,
+ const char *sshm_path)
+{
+ int rc, count;
+ const char *count_path, *count_string;
+
+ count_path = GCSPRINTF("%s/usercnt", sshm_path);
+ rc = libxl__xs_read_checked(gc, xt, count_path, &count_string);
+ if (rc) goto out;
+ count = atoi(count_string);
+
+ count_string = GCSPRINTF("%d", count+1);
+ rc = libxl__xs_write_checked(gc, xt, count_path, count_string);
+ if (rc) goto out;
I was a about to say the update does not look safe, but then noticed it
was called within a same transation. You might want to add a comment on
top of this function to avoid misunderstanding.
+
+ rc = 0;
+out:
+ return rc;
+}
+
+static int libxl__sshm_add_slave(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshm)
+{
+ int rc, i;
+ const char *sshm_path, *slave_path;
+ const char *dom_path, *dom_sshm_path, *dom_role_path;
+ const char *xs_value;
+ char *ents[9];
+ libxl_static_shm master_sshm;
+ uint32_t master_domid;
+ xen_pfn_t *mapped;
+ unsigned int nmapped = 0;
+ xs_transaction_t xt = XBT_NULL;
+ bool isretry;
+
+ sshm_path = SSHM_PATH(sshm->id);
+ slave_path = GCSPRINTF("%s/slaves/%"PRIu32, sshm_path, domid);
+ dom_path = libxl__xs_get_dompath(gc, domid);
+ /* the domain should be in xenstore by now */
+ assert(dom_path);
+ dom_sshm_path = GCSPRINTF("%s/static_shm/%s", dom_path, sshm->id);
+ dom_role_path = GCSPRINTF("%s/role", dom_sshm_path);
+
+ /* prepare the slave xenstore entries */
+ ents[0] = "begin";
+ ents[1] = GCSPRINTF("0x%"PRIx64, sshm->begin);
+ ents[2] = "end";
+ ents[3] = GCSPRINTF("0x%"PRIx64, sshm->end);
+ ents[4] = "offset";
+ ents[5] = GCSPRINTF("0x%"PRIx64, sshm->offset);
+ ents[6] = "prot";
+ ents[7] = libxl__strdup(gc, libxl_sshm_prot_to_string(sshm->prot));
+ ents[8] = NULL;
+
+ mapped = libxl__calloc(gc, (sshm->end - sshm->begin) >> XC_PAGE_SHIFT,
+ sizeof(xen_pfn_t));
+
+ isretry = false;
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &xt);
+ if (rc) goto out;
+
+ if (!libxl__xs_read(gc, xt, sshm_path)) {
+ SSHM_ERROR(domid, sshm->id, "no master found.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* every ID can appear in each domain at most once */
+ if (libxl__xs_read(gc, xt, dom_sshm_path)) {
+ SSHM_ERROR(domid, sshm->id,
+ "domain tried to map the same ID twice.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* look at the master info and see if we could do the mapping */
+ rc = libxl__xs_read_checked(gc, xt,
+ GCSPRINTF("%s/prot", sshm_path),
+ &xs_value);
+ if (rc) goto out;
+ libxl_sshm_prot_from_string(xs_value, &master_sshm.prot);
+
+ rc = libxl__xs_read_checked(gc, xt,
+ GCSPRINTF("%s/begin", sshm_path),
+ &xs_value);
+ if (rc) goto out;
+ master_sshm.begin = strtoull(xs_value, NULL, 16);
+
+ rc = libxl__xs_read_checked(gc, xt,
+ GCSPRINTF("%s/end", sshm_path),
+ &xs_value);
+ if (rc) goto out;
+ master_sshm.end = strtoull(xs_value, NULL, 16);
+
+ rc = libxl__xs_read_checked(gc, xt,
+ GCSPRINTF("%s/master", sshm_path),
+ &xs_value);
+ if (rc) goto out;
+ master_domid = strtoull(xs_value, NULL, 16);
+
+ if (sshm->prot == LIBXL_SSHM_PROT_UNKNOWN)
+ sshm->prot = master_sshm.prot;
+
+ /* check if the slave is asking too much permission */
+ if (master_sshm.prot < sshm->prot) {
+ SSHM_ERROR(domid, sshm->id, "slave is asking too much
permission.");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ /* all checks passed, do the job */
+ if (!isretry) {
+ rc = libxl__sshm_do_map(gc, master_domid, domid,
+ sshm, &master_sshm,
+ mapped, &nmapped);
+ if (rc) goto out;
+ }
+
+ /* write the result to xenstore and commit */
+ rc = libxl__xs_write_checked(gc, xt, dom_role_path, "slave");
+ if (rc) goto out;
+ rc = libxl__xs_writev(gc, xt, slave_path, ents);
+ if (rc) goto out;
+ rc = libxl__sshm_incref(gc, xt, sshm_path);
+ if (rc) goto out;
+
+ rc = libxl__xs_transaction_commit(gc, &xt);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ isretry = true;
+ }
+
+ rc = 0;
+out:
+ if (rc) {
+ /* roll back successfully mapped pages */
+ SSHM_ERROR(domid, sshm->id, "failed to map some pages, cancelling.");
+ for (i = 0; i < nmapped; i++) {
+ xc_domain_remove_from_physmap(CTX->xch, domid, mapped[i]);
+ }
+ }
+
+ libxl__xs_transaction_abort(gc, &xt);
+
+ return rc;
+}
+
+static int libxl__sshm_add_master(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshm)
+{
+ int rc;
+ const char *sshm_path, *dom_path, *dom_role_path;
+ char *ents[13];
+ struct xs_permissions noperm;
+ xs_transaction_t xt = XBT_NULL;
+
+ sshm_path = SSHM_PATH(sshm->id);
+ dom_path = libxl__xs_get_dompath(gc, domid);
+ /* the domain should be in xenstore by now */
+ assert(dom_path);
+ dom_role_path = GCSPRINTF("%s/static_shm/%s/role", dom_path, sshm->id);
+
+ /* prepare the xenstore entries */
+ ents[0] = "master";
+ ents[1] = GCSPRINTF("%"PRIu32, domid);
+ ents[2] = "begin";
+ ents[3] = GCSPRINTF("0x%"PRIx64, sshm->begin);
+ ents[4] = "end";
+ ents[5] = GCSPRINTF("0x%"PRIx64, sshm->end);
+ ents[6] = "prot";
+ ents[7] = libxl__strdup(gc, libxl_sshm_prot_to_string(sshm->prot));
+ ents[8] = "cache_policy";
+ ents[9] = libxl__strdup(gc,
+
libxl_sshm_cachepolicy_to_string(sshm->cache_policy));
+ ents[10] = "usercnt";
+ ents[11] = "1";
+ ents[12] = NULL;
+
+ /* could only be accessed by Dom0 */
+ noperm.id = 0;
+ noperm.perms = XS_PERM_NONE;
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &xt);
+ if (rc) goto out;
+
+ if (!libxl__xs_read(gc, xt, sshm_path)) {
+ /* every ID can appear in each domain at most once */
+ if (libxl__xs_read(gc, xt, dom_role_path)) {
+ SSHM_ERROR(domid, sshm->id,
+ "domain tried to map the same ID twice.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ rc = libxl__xs_write_checked(gc, xt, dom_role_path, "master");
+ if (rc) goto out;;
+
+ libxl__xs_mknod(gc, xt, sshm_path, &noperm, 1);
+ libxl__xs_writev(gc, xt, sshm_path, ents);
+ } else {
+ SSHM_ERROR(domid, sshm->id, "can only have one master.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_transaction_commit(gc, &xt);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+ rc = 0;
+out:
+ libxl__xs_transaction_abort(gc, &xt);
+ return rc;
+}
+
+int libxl__sshm_add(libxl__gc *gc, uint32_t domid,
+ libxl_static_shm *sshms, int len)
+{
+ int rc, i;
+
+ for (i = 0; i < len; ++i) {
+ if (sshms[i].role == LIBXL_SSHM_ROLE_SLAVE) {
+ rc = libxl__sshm_add_slave(gc, domid, sshms+i);
+ } else {
+ rc = libxl__sshm_add_master(gc, domid, sshms+i);
+ }
+ if (rc) return rc;
+ }
+
+ return 0;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/tools/libxl/libxl_x86.c b/tools/libxl/libxl_x86.c
index 5f91fe4f92..8ec5044eb2 100644
--- a/tools/libxl/libxl_x86.c
+++ b/tools/libxl/libxl_x86.c
@@ -596,6 +596,25 @@ void libxl__arch_domain_build_info_acpi_setdefault(
libxl_defbool_setdefault(&b_info->acpi, true);
}
+bool libxl__arch_domain_support_sshm(const libxl_domain_build_info *b_info)
+{
+ /* FIXME: Mark this as unsupported for calling p2m_add_foreign on two
+ * DomU's is currently not allowd on x86, see the comments in
+ * x86/mm/p2m.c: p2m_add_foreign.
+ */
+ return false;
+}
+
+int libxl__arch_domain_sshm_cachepolicy_setdefault(libxl_static_shm *sshm)
+{
+ if (sshm->cache_policy == LIBXL_SSHM_CACHEPOLICY_UNKNOWN)
+ sshm->cache_policy = LIBXL_SSHM_CACHEPOLICY_X86_NORMAL;
+ if (sshm->cache_policy < LIBXL_SSHM_CACHEPOLICY_X86_NORMAL)
+ return ERROR_INVAL;
+
+ return 0;
+}
+
/*
* Local variables:
* mode: C
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
