Hi, Thanks for helping me.
I'm trying lots of different things so maybe there are traces of older tries i've done conflicting right now. I'm planning on starting over again from the very beginning. I just wanna know what tutorial follow. The one from the Wiki, from the mail thread or another one. Link to tutorials: Wiki: http://wiki.xenproject.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping Mail Thread: http://xen.markmail.org/search/?q=COLO#query:COLO+page:1+ mid:fb7wrn62vbks4unn+state:results I had a little fight against ubuntu, so if you could suggest me an operating system to, would be of great help. Thanks, Sadi. On Wed, Nov 9, 2016 at 11:03 PM, Wen Congyang <we...@cn.fujitsu.com> wrote: > On 11/10/2016 01:31 AM, Sadi wrote: > > Hello again, > > > > Looking at the primary host's syslog, the arptables command from > xen/etc/scripts/colo-proxy-setup has failed. > > > > Here's the log: > > > > Nov 9 14:43:39 colop colop: /etc/xen/scripts/colo-proxy-setup: setup > XENBUS_PATH= > > Nov 9 14:43:39 colop kernel: [ 302.825788] u32 classifier > > Nov 9 14:43:39 colop kernel: [ 302.825791] Actions configured > > Nov 9 14:43:39 colop kernel: [ 302.835407] Mirror/redirect action on > > Nov 9 14:43:39 colop kernel: [ 302.919605] ip6_tables: (C) 2000-2006 > Netfilter Core Team > > Nov 9 14:43:39 colop kernel: [ 302.941511] arp_tables: (C) 2002 David > S. Miller > > Nov 9 14:43:39 colop colop: /etc/xen/scripts/colo-proxy-setup: > arptables -I INPUT -i eth1 -j MARK --set-mark 1 failed > > Nov 9 14:43:39 colop colop: /etc/xen/scripts/colo-proxy-setup: Writing > /hotplug-status connected to xenstore. > > Nov 9 14:43:39 colop colop: /etc/xen/scripts/colo-proxy-setup: > Successful colo-proxy-setup setup for vif2.0-emu. mode = primary vifname: > vif2.0-emu, index: 1, forwarddev: eth1. > > > > It's ok for the --set-mark argument to have value equal '1' , not a hex? > > This log is very useful, we will investigate it. > > Thanks > Wen Congyang > > > > > The i got running the command is: > > root@colop:~# arptables -I INPUT -i eth1 -j MARK --set-mark 1 > > Bad argument `1' > > > > Thanks, Sadi. > > > > > > > > On Tue, Nov 8, 2016 at 6:53 PM, Sadi <sadi...@gmail.com <mailto: > sadi...@gmail.com>> wrote: > > > > Hi, > > > > Apparently vif2.0-emu was already binded with br0 when "brctl addif > br0 vif2.0-emu" failed. > > > > root@colob-HP-Compaq-6005-Pro-MT-PC:~# brctl addif br0 vif2.0-emu > > device vif2.0-emu is already a member of a bridge; can't enslave it > to bridge br0. > > root@colob-HP-Compaq-6005-Pro-MT-PC:~# brctl show > > bridge name bridge id STP enabled interfaces > > br0 8000.001a3fc46255 no eth0 > > vif2.0 > > vif2.0-emu > > br1 8000.000000000000 no > > > > About the iptables, it seems like SECCOLO target can't be recognised. > > > > root@colob-HP-Compaq-6005-Pro-MT-PC:~# iptables -t mangle -D > PREROUTING -m physdev --physdev-in vif2.0-emu -j SECCOLO --index 1 > > iptables: No chain/target/match by that name. > > > > Here is my active modules matching colo: > > > > root@colob-HP-Compaq-6005-Pro-MT-PC:~# lsmod | grep -i colo > > xt_SECCOLO 16384 1 > > nf_conntrack_colo 16384 2 xt_SECCOLO > > x_tables 36864 8 xt_physdev,ip6table_mangle,ip_ > tables,xt_SECCOLO,xt_tcpudp,iptable_filter,iptable_mangle,ip6_tables > > nf_conntrack 106496 4 xt_SECCOLO,nf_nat,nf_ > conntrack_colo,nf_conntrack_ipv4 > > > > So i was looking in the iptables and this really looks like the > source of the problem. > > > > Sadi. > > > > On Tue, Nov 8, 2016 at 5:57 PM, Konrad Rzeszutek Wilk < > konrad.w...@oracle.com <mailto:konrad.w...@oracle.com>> wrote: > > > > > entered forwarding state > > > Nov 7 18:10:30 colob NetworkManager[907]: <info> > (vif2.0-emu): enslaved > > > to br0 > > > Nov 7 18:10:30 colob root: /etc/xen/scripts/colo-proxy-setup: > brctl addif > > > br0 vif2.0-emu failed > > > > > > How come this failed? > > > > > Nov 7 18:10:30 colob root: /etc/xen/scripts/colo-proxy-setup: > iptables -t > > > mangle -D PREROUTING -m physdev --physdev-in vif2.0-emu -j > SECCOLO --index > > > 1 failed > > > > Ah b/c of this. Are there any errors of what exactly failed? > > > > > > > > > > -- > > Sadi. > > > > > > > > > > -- > > Sadi. > > > > -- Sadi.
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel
