Hi, all:
I want to learn how the emulated NICs work in XEN. So I boot a DomU with an
emulated rtl8139 NIC, ping host from DomU and capture the trace info using
xentrace tool, and then check the log of qemu-dm and trace info analyzed by
xenalyze tool. I have enabled debug in rtl8139.c and added debug info to
qemu-dm when receiving ioreq. The host runs XEN 4.4.1 and have EPT enabled.
If I understand right, the TX procedure from DomU to Dom0 is as follows:
1. RTL8139 driver in Guest Kernel write Guest Physical Address of data to be
sent to the corresponding registers of RTL8139
2. The address space of registers were marked "special" in hvmloader, so the
DomU will exit with EPT_VIOLATION reason
3. Hypervisor will handle the exit in ept_handle_violation() function and then
call hvm_hap_nested_page_fault(gfn). In the latter function, hypervisor will
get the mfn from gfn and judge that the gfn is emulated MMIO, and then pass the
fault to mmio handler
4. The MMIO handler will generate an IOREQ with related info and push it to
"Shared Memory Page" between DomU and Qemu-Dm in Dom0, which is initialized
when booting DomU via hvm_init() function, and then notify qemu-dm via event
channel which is also initialized in hvm_init function
5. QEMU-DM will get the IOREQ and call the corresponding callbacks registered
by RTL8139.c in qemu
However, from the qemu-dm's log and trace info, I have two questions:
1. In step 4 mentioned above, is the ioreq passed through "shared memory page"
or "buffed io page"? Both of them are initialized in hvm_init function.
2. From the trace info and qemu-dm's log, it seems that it is "GPA" (Guest
Physical Address) instead of "MFN" in the IOREQ's data field received by
qemu-dm:
a. EPT_VIOLATION related records in xentrace:
] 1.744702725 -x-- d3v1 vmexit exit_reason EPT_VIOLATION
eip ffffffffa01624ae
1.744702725 -x-- d3v1 npf gpa f2051020 q 182 mfn
ffffffffffffffff t 4
] 1.744702725 -x-- d3v1 mmio_assist w gpa f2051020 data
d4e6c400
1.744706888 -x-- d3v1 runstate_change d0v0
blocked->runnable
As shown above, the value of data is "d4e6c400", I think it is the data
represents the txbuf address written by DomU, so it should be the GPA of DomU.
From the code I do find that the data is the "ram_gpa" argument in
xen/arch/x86/hvm/emulate.c:hvmemul_do_io function.
b. Related ioreq received by qemu-dm and handled by RTL8139.c in Dom0:
xen: I/O request: 1, ptr: 0, port: f2051020, data: d4e6c400,
count: 1, size: 4
RTL8139: TxAddr write offset=0x0 val=0xd4e6c400
As shown above, the data field of ioreq received by qemu-dm is also
"0xd4e6c400" which is the GPA of DomU.
c. RTL8139.c does the transmit work:
RTL8139: C+ TxPoll write(b) val=0x40
RTL8139: C+ TxPoll normal priority transmission
RTL8139: +++ C+ mode reading TX descriptor 0 from host memory
at 00000000 d4e6c400 = 0xd4e6c400
RTL8139: +++ C+ mode TX descriptor 0 b000005a 00000000 ead20802
00000000
RTL8139: +++ C+ Tx mode : transmitting from descriptor 0
RTL8139: +++ C+ Tx mode : descriptor 0 is first segment
descriptor
RTL8139: +++ C+ mode transmission buffer allocated space 65536
RTL8139: +++ C+ mode transmit reading 90 bytes from host memory
at ead20802 to offset 0
RTL8139: +++ C+ Tx mode : descriptor 0 is last segment
descriptor
RTL8139: +++ C+ mode transmitting 90 bytes packet
RTL8139: +++ C+ mode reading TX descriptor 1 from host memory
at 00000000 d4e6c400 = 0xd4e6c410
RTL8139: +++ C+ mode TX descriptor 1 00000000 00000000 00000000
00000000
RTL8139: C+ Tx mode : descriptor 1 is owned by host
RTL8139: Set IRQ to 1 (0004 80ff)
As shown above, RTL8139 will read TX descriptor from HOST MEMORY at
0xd4e6c400, which is the GPA of DomU.
I think qemu-dm/rtl8139 should read/write data from "MFN" address in host
memory instaed of GPA, and I find that there isn't hypercall from dom0 to
"translate" the gpa to mfn in subsequent xentrace info. Is my understanding is
wrong?
I would really appreciate your help.
----------
Best Regards
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
