On 02/06/2015 09:33 PM, Kristian Hagsted Rasmussen wrote:
On Friday, February 6, 2015 15:25, Juergen Gross <jgr...@suse.com> wrote:
To: Kristian Hagsted Rasmussen; Olaf Hering; xen-de...@lists.xensource.com
Subject: Re: [Xen-devel] pvSCSI test
After some more fiddling around, I believe the configuration should be okay. My
/etc/target/xen-pvscsi_start.sh look like this:
modprobe xen-scsiback
mkdir /sys/kernel/config/target/xen-pvscsi
mkdir -p /sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0
echo naa.6001405708ab297e >
/sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0/nexus
#### xen-pvscsi Target Ports
mkdir -p
/sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0/lun/lun_0
ln -s
/sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0/lun/lun_0/../../../../../../target/core/iblock_0/3_0_0_0
/sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0/lun/lun_0/xen-pvscsi_port
iblock_0?
Sorry the result is the same if I use pscsi, I just tried iblock as it was a
harddisk I tried to pass through and lio documentation advice against using
pscsi for hard drives.
I just now tried to pass through a bluray drive on another machine, however I
get the exact same error. What I noticed, however, was that the error only
appears if the DomU kernel supports xen-scsifront. I hazzard a guess that this
is because the backend only tries to connect to the device if the frontend
makes a call for it.
In xenstore I have the following entry for vscsi under /local/domain/0/backend:
vscsi = ""
3 = ""
0 = ""
frontend = "/local/domain/3/device/vscsi/0"
frontend-id = "3"
online = "1"
state = "4"
feature-host = "0"
vscsi-devs = ""
dev-0 = ""
p-dev = "3:0:0:0"
v-dev = "0:0:0:0"
state = "6"
feature-sg-grant = "128"
As I am no expert I am not sure about this, but shouldn't there be a path to
the device, more then just the p-dev statement?
No, that's okay. The connection between p-dev and the drive is done
via the target infrastructure.
Something seems to be wrong with your link in configfs: the target
seems not to be active. Could you please check the link to be correct?
Please check whether the pscsi (or iblock) entry is active. This can
be done via the "ls" command in targetcli for example.
When I tested the pscsi entry in configfs switched to "active" when I
linked the xen-pvscsi entry to it.
Do I have to manually add the device to xenstore?
I never did it. :-)
Juergen
If you do not feel for answering more of my questions please feel free to say
so, I am just interested in this work and really look forward to its inclusion
in xen.
/Kristian
You are not using pscsi, but iblock. Is that on purpose? I have tested
pscsi and fileio only.
What does lsscsi tell you after adding the device via targetcli? I
suppose you see a new scsi target you should use instead of 3:0:0:0
(that's what I did in the fileio case).
#### Attributes for xen-pvscsi Target Portal Group
#### Parameters for xen-pvscsi Target Portal Group
echo "3:0:0:0" >
/sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0/param/alias
And
cat /sys/kernel/config/target/xen-pvscsi/naa.600140512a981c66/tpgt_0/param/alias
returns 3:0:0:0 as expected.
If I understand this correctly, it is xen-scsiback that reads the target
configuration from ConfigFS and hence the problem that xen-pvscsi cannot find
the device has nothing to do with which toolstack is used?
Yes and no. In theory the backend would accept anything from xenstore
which it can find in configfs. The toolstack however will only write
values into the xenstore it believes are valid SCSI devices.
If you are willing to part with the script you used together with targetcli, I
would be more then happy to try that out.
I did my first tests with fileio on a machine I have no longer access
to. after I got it running I changed to my local test machine and pscsi.
Here I did the targetcli stuff manually and verified afterwards that
the single steps I put in my script were working. So the script I gave
you is basically the documentation of the manual setup I used.
Juergen
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
