Hi Uwe,
Thanks for responding to my message..
Perhaps i should have explained that its was the TX side that was not
working but I had never seen that Transmit Audio Source box greyed out.
I have now solved the TX problem but the box is still greyed out..
I will leave it like it is as it does not seem to make a difference.
Thanks again Uwe..
73
Karl M5DND
On 31-Jan-23 15:00, Uwe, DG2YCB via wsjt-devel wrote:
Karl,
Is the audio source perhaps disabled at Windows level? Have a look at
the Windows Sounds settings (right-click on the speaker icon at the
bottom right and then "Sounds"). It may be that your FT-991 is now
recognized as a "new" audio source, and the old one no longer works.
73 de Uwe, DG2YCB
Am 31.01.2023 um 15:24 schrieb Karl Read via wsjt-devel:
hi All,
After having to do a factory restart on my FT991, I used the settings
which I had saved on the PC using the RT Systems Software.
Every thing seemed to be ok but I could not get the radio to TX using
WSJT-X V2.6.1 , Windows 10..
The Radio setting page, in WSJT-X, shows the Transmit Audio Source
greyed out with the Front/Mic ticked..
Any ideas how to correct this please...
Thanks
Karl M5DND
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
