I’m a Mac user so will work around the issue with the Kenwood settings for now.
Thanks for the info, Mike. George J Molnar College Park, Maryland KF2T FM19ma > On Nov 29, 2022, at 1:52 PM, Jay via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > This has solved the problem for me. Thanks Mike and the team. > > Jay KA9CFD > > -----Original Message----- > From: Black Michael <mdblac...@yahoo.com> > Sent: Tuesday, November 29, 2022 12:37 > To: wsjt-devel@lists.sourceforge.net > Cc: ka9...@mtcnow.net > Subject: Re: [wsjt-devel] WSJT-X 2.6.0-rc5 hamlib failure for Flex radio > > RC5 was built with an older hamlib. > > Please try the latest. > > New hamlib for installation directions > > #1 Shut down WSJTX > > > #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of > WSJTX -- hopefully your browser doesn't block it but may warn you multiple > times. > > > If you can do a "Save As" you can save it directly in the appropriate WSJTX > directory C:\WSJT\WSJTX\bin and replace the libhamlib-4.dll that is there. > > > http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll > > > http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll > > > Linux/Unix/Mac users need to compile the latest tar file from > http://n0nb.users.sourceforge.net > Note: If compiling on Unix-like systems please uninstall any Hamlib package > you have before installing the new build > > > #3 If you don't save directly you need to open a file browser and move the > file that way. > > > If you're not familiar with that here's a video on the file browser - > https://www.youtube.com/watch?v=AyVqCJrs9dk > > > Mike W9MDB > > > > > > > > > On Tuesday, November 29, 2022 at 12:08:03 PM CST, Jay via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > I just installed the new RC5 into my Windows 10 64 bit computer and am > getting a Hamlib error when trying to activate CAT control. > > Radio is a Flex 6500 and I normally use TCP ports to control the Slice > receiver, This is NOT the Kenwood emulation using COM ports. However I get > this error message when I try to test the CAT connection in the > Settings/Radio tab in WSJT-X RC5. See attached jpg. > > 73 Jay KA9CFD > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
