Dobt all Assemblies get added to the GAC though?? Then use the Version  
Search to Search the GAC.  Could be totally wrong, I just know how it  
feels when a relatively easy task turns into a mountain...

Quoting Bryan Wolf <brw...@jackhenry.com>:

> As far as I'm aware, neither FileSearch, DirectorySearch, RemoveFile  
> or RemoveFileEx can target Assemblies because the paths to them are  
> generated and the FileKeys don't point to those assembly paths.
>
> Otherwise it would be easy to just do a Remove File table entry and  
> all will work "automagically" including update, uninstall, rollback,  
> etc. with the note that you'll always end up reinstalling that file  
> (desirable) and skip the search entirely.
>
> -----Original Message-----
> From: Carter Young [mailto:ecyo...@grandecom.net]
> Sent: Tuesday, April 22, 2014 2:18 PM
> To: wix-users@lists.sourceforge.net
> Subject: Re: [WiX-users] Major upgrade removing files
>
> I may be talking out the side of my mouth here,, but why cant he  
> remove version N doing a version check like so:
>
> http://wixtoolset.org/documentation/manual/v3/howtos/files_and_registry/check_the_version_number.html
>
> and then if the Installed file >= N remove said file and replace with N - 1
>
> Carter
>
> Quoting Bryan Wolf <brw...@jackhenry.com>:
>
>> The issue was fixed in MSI 5.0 or if you install the hotfix
>> (http://support.microsoft.com/kb/972397/EN-US), but that won't help
>> him because he's down-revving a versioned file. Even if it remains
>> after the major upgrade, it will still be version (n) and not (n - 1).
>>
>> To be honest, I think sequencing REP before CostInitialize is probably
>> the only "good" answer for assemblies. As a warning:
>> sequencing REP before CostInitialize does cause an ICE27 error.
>>
>> -----Original Message-----
>> From: Phil Wilson [mailto:phildgwil...@gmail.com]
>> Sent: Tuesday, April 22, 2014 11:04 AM
>> To: General discussion about the WiX toolset.
>> Subject: Re: [WiX-users] Major upgrade removing files
>>
>> This shouldn't apply to later MSI engines - according this KB article
>> it shouldn't be a problem if you make sure you have at least MSI 4.0,
>> or ship the 4.5 redist.
>>
>> http://support.microsoft.com/kb/905238/en-us
>>
>> but I vaguely remember the original MSI needs installing with a
>> correct MSI engine too, not too sure on that.
>>
>> I had a call with MS support a while back on that proposed fix of
>> sequencing REP before CostInitialize and they said it would be ok.
>> But you will lose MigrateFeatureState capability.
>>
>> ---------------
>> Phil Wilson
>>
>>
>> On Tue, Apr 22, 2014 at 7:11 AM, Bryan Wolf <brw...@jackhenry.com> wrote:
>>> The always overwrite flag in InstallShield just sets the FileVersion
>>> column to 65535.0.0.0. WiX has the DefaultVersion field, which should
>>> duplicate the experience. Alternatively, just modify the MSI
>>> post-build for this one-off. It would be easier if you were not using
>>> an assembly file because you could just author a RemoveFile table
>>> entry associated with the component and it would actually cover all
>>> bases. But I'm not sure RemoveFile or RemoveFileEx can help you with
>>> assemblies - seems like the answer is "No".
>>>
>>> Down-versioning files is always a rough experience. The third party
>>> case is always an especially nasty one; sometimes that's where
>>> something like Burn might be able to help or a custom bootstrapper to
>>> just purge the old version before-hand giving you a clean slate.
>>>
>>> -----Original Message-----
>>> From: kirannhegde [mailto:kirann.he...@gmail.com]
>>> Sent: Monday, April 21, 2014 11:30 PM
>>> To: wix-users@lists.sourceforge.net
>>> Subject: [WiX-users] Major upgrade removing files
>>>
>>> Hello ,
>>>
>>> Here is my scenario:
>>>
>>> A  higher version installer contains lower version of certain binaries . In
>>> the higher versioned installer,  sequencing   "RemoveExistingProducts"
>>> after  "InstallInitialize"  results in missing files.  This is an
>>> issue with Windows  Installer service and has been around  since
>>> 2002.
>>>
>>> I see the following entires in the log file:
>>>
>>> Here is a snippet from the  Merlin RTM windows installer log file:
>>> MSI (s) (48:F0) [07:39:20:997]: skipping installation of assembly  
>>> component:
>>> {3C582984-7607-3E35-A337-D3D327097351} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:001]: skipping installation of
>>> assembly component:
>>> {6D321E57-3E99-3B87-BF23-2CDFF3361CB4} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:003]: skipping installation of
>>> assembly component:
>>> {229E8F96-1AE0-32E6-8428-D2CBCA122740} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:006]: skipping installation of
>>> assembly component:
>>> {AE56AAF5-F3C0-3D4B-8859-A1E50A3E27BF} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:024]: Disallowing installation of
>>> component:
>>> {4D2EB851-13AC-500F-9704-AB78102F8D0F} since the same component with
>>> higher versioned keyfile exists MSI (s) (48:F0)
>>> [07:39:21:029]: skipping installation of assembly component:
>>> {F2F5F3C2-7A2E-58A8-81FB-6D05B2446DC5} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:032]: skipping installation of
>>> assembly component:
>>> {084F57E8-E40B-5B1E-AABC-7F0A7B77D223} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:035]: skipping installation of
>>> assembly component:
>>> {5DF9A9B3-8FBE-57C1-95AE-D08C44084A77} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:041]: skipping installation of
>>> assembly component:
>>> {F703FAD2-5314-5C11-B7B3-AA960D6CB678} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:043]: skipping installation of
>>> assembly component:
>>> {FB288044-FD6A-5A2C-BE23-BD941E55B184} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:046]: skipping installation of
>>> assembly component:
>>> {7DF41602-3F0E-5FED-BC1B-3E55EB39E439} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:049]: skipping installation of
>>> assembly component:
>>> {F1A4761C-24F2-5A42-9BAE-B9E3AFFA9F51} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:056]: skipping installation of
>>> assembly component:
>>> {9ED4023C-789C-5FB2-B8AD-19FE3B0B816F} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:195]: skipping installation of
>>> assembly component:
>>> {EA346F23-593F-5D59-9605-5B764FC05873} since the assembly already
>>> exists MSI (s) (48:F0) [07:39:21:199]: skipping installation of
>>> assembly component:
>>> {3CAED2EB-627D-52F7-AD44-7138E03EE961} since the assembly already
>>> exists
>>>
>>>
>>>
>>> To solve this, i have come across the following suggestions:
>>> -Schedule  "RemoveExistingProducts" earlier  in the   sequence, even before
>>> costing i.e before CostInitialize.However, doing that violates  the
>>> guidelines laid out by MSDN. MSDN suggests a sequencing between
>>> InstallValidate and Install Initialize as one of the positions.
>>> InstallValidate is sequenced after costing. Hence, even though this
>>> solution might work,  this is a violation of  Microsoft rules
>>>
>>> -Use REINSTALLMODE = emus
>>>
>>> -Force the file to be always overwritten -  Not feasible for Wix.
>>> Only exists in InstallShield
>>>
>>> -Version - Handle the versions properly in the higher versions of the
>>> installer.
>>>
>>>
>>> I agree that  having higher versions of the files in the higher
>>> versioned installer is the easiest and safest approach.  However,
>>> there could be genuine cases where you  might want to include lower
>>> versions of certain binaires in a highver verison of your product.
>>> This is common with third party binaries.
>>>
>>>
>>> So how do you think that this should be handled?
>>>
>>>
>>> As usual, any assistance is very much appreciated.
>>>
>>>
>>>
>>> --
>>> View this message in context:
>>> http://windows-installer-xml-wix-toolset.687559.n2.nabble.com/Major-u
>>> p
>>> grade-removing-files-tp7594245.html
>>> Sent from the wix-users mailing list archive at Nabble.com.
>>>
>>> ---------------------------------------------------------------------
>>> -
>>> -------- Start Your Social Network Today - Download eXo Platform
>>> Build your Enterprise Intranet with eXo Platform Software Java Based
>>> Open Source Intranet - Social, Extensible, Cloud Ready Get Started
>>> Now And Turn Your Intranet Into A Collaboration Platform
>>> http://p.sf.net/sfu/ExoPlatform
>>> _______________________________________________
>>> WiX-users mailing list
>>> WiX-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wix-users
>>> NOTICE: This electronic mail message and any files transmitted with
>>> it are intended exclusively for the individual or entity to which it
>>> is addressed. The message, together with any attachment, may contain
>>> confidential and/or privileged information.
>>> Any unauthorized review, use, printing, saving, copying, disclosure
>>> or distribution is strictly prohibited. If you have received this
>>> message in error, please immediately advise the sender by reply email
>>> and delete all copies.
>>>
>>>
>>> ---------------------------------------------------------------------
>>> -
>>> -------- Start Your Social Network Today - Download eXo Platform
>>> Build your Enterprise Intranet with eXo Platform Software Java Based
>>> Open Source Intranet - Social, Extensible, Cloud Ready Get Started
>>> Now And Turn Your Intranet Into A Collaboration Platform
>>> http://p.sf.net/sfu/ExoPlatform
>>> _______________________________________________
>>> WiX-users mailing list
>>> WiX-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wix-users
>>
>> ----------------------------------------------------------------------
>> -------- Start Your Social Network Today - Download eXo Platform Build
>> your Enterprise Intranet with eXo Platform Software Java Based Open
>> Source Intranet - Social, Extensible, Cloud Ready Get Started Now And
>> Turn Your Intranet Into A Collaboration Platform
>> http://p.sf.net/sfu/ExoPlatform
>> _______________________________________________
>> WiX-users mailing list
>> WiX-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wix-users
>> NOTICE: This electronic mail message and any files transmitted with it
>> are intended exclusively for the individual or entity to which it is
>> addressed.
>> The message,
>> together with any attachment, may contain confidential and/or
>> privileged information.
>> Any unauthorized review, use, printing, saving, copying, disclosure or
>> distribution is strictly prohibited. If you have received this message
>> in error, please immediately advise the sender by reply email and
>> delete all copies.
>>
>>
>> ----------------------------------------------------------------------
>> -------- Start Your Social Network Today - Download eXo Platform Build
>> your Enterprise Intranet with eXo Platform Software Java Based Open
>> Source Intranet - Social, Extensible, Cloud Ready Get Started Now And
>> Turn Your Intranet Into A Collaboration Platform
>> http://p.sf.net/sfu/ExoPlatform
>> _______________________________________________
>> WiX-users mailing list
>> WiX-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wix-users
>>
>>
>
>
>
>
> ------------------------------------------------------------------------------
> Start Your Social Network Today - Download eXo Platform Build your  
> Enterprise Intranet with eXo Platform Software Java Based Open  
> Source Intranet - Social, Extensible, Cloud Ready Get Started Now  
> And Turn Your Intranet Into A Collaboration Platform  
> http://p.sf.net/sfu/ExoPlatform  
> _______________________________________________
> WiX-users mailing list
> WiX-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wix-users
> NOTICE: This electronic mail message and any files transmitted with  
> it are intended
> exclusively for the individual or entity to which it is addressed.  
> The message,
> together with any attachment, may contain confidential and/or  
> privileged information.
> Any unauthorized review, use, printing, saving, copying, disclosure  
> or distribution
> is strictly prohibited. If you have received this message in error, please
> immediately advise the sender by reply email and delete all copies.
>
>
> ------------------------------------------------------------------------------
> Start Your Social Network Today - Download eXo Platform
> Build your Enterprise Intranet with eXo Platform Software
> Java Based Open Source Intranet - Social, Extensible, Cloud Ready
> Get Started Now And Turn Your Intranet Into A Collaboration Platform
> http://p.sf.net/sfu/ExoPlatform
> _______________________________________________
> WiX-users mailing list
> WiX-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wix-users
>
>




------------------------------------------------------------------------------
Start Your Social Network Today - Download eXo Platform
Build your Enterprise Intranet with eXo Platform Software
Java Based Open Source Intranet - Social, Extensible, Cloud Ready
Get Started Now And Turn Your Intranet Into A Collaboration Platform
http://p.sf.net/sfu/ExoPlatform
_______________________________________________
WiX-users mailing list
WiX-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wix-users

Reply via email to