Good afternoon I'm spending the next couple of days investigating Burn in order to ditch our custom C++ bootstrapper. I like what Burn appears to offer.
When I try to use a UX DLL that targets the .NET Framework 4, the EXE that Burn outputs won't even launch. The error log in %TEMP% shows: [4A70:46EC][2011-08-24T15:50:11]: Error 0x80131508: Failed to create the managed bootstrapper application. [4A70:46EC][2011-08-24T15:50:11]: Error 0x80131508: Failed to create UX. [4A70:46EC][2011-08-24T15:50:11]: Error 0x80131508: Failed to load UX. [4A70:46EC][2011-08-24T15:50:11]: Error 0x80131508: Failed while running [4A70:46EC][2011-08-24T15:50:11]: Error 0x80131508: Failed to run per-user mode. When I change the UX DLL target to the .NET Framework 3.5, the EXE will launch. Is the .NET Framework 4 supported? My WiX version is 3.6.2005.0 (produced August 5, 2011). Thanks - Shaun The information in this e-mail is intended solely for the addressee and access by anyone else is unauthorized. Omnivex accepts no liability for the content of this e-mail, or for the consequences of any actions taken on the basis of the information provided. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. Omnivex makes no warranties, express or implied and is not responsible for errors or omissions. ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
